This paper examines how and if the understanding of wedding photography has changed during the shift of technology - from analog to digital photography. It examines if the changed conditions due to the shift of technology have changed the habits and conditions for the photographers working with wedding photography. It furthermore examines what impact these habits and conditions have had on the pictures of weddings. The investigation is based on interviews of six photographers that have worked professionally before and after the shift of technology, as well as of pictures by the photographers taken before and after the shift of technology.Use of time and space has changed due to the shift of technology. The change has also had an influence on hierarchy among the photographers.

This is a master degree thesis at Royal Institute of Technology (KTH) betweenÅngpanneföreningen and Programma. KTH is the examiner, Programma is the client andÅngpanneföreningen is mentor for this project.Programma has a product called TM1800 that has problems with EMC; the problem is thatthis product does only pass the CE-check with a small safety margin. This problem can besolved by reducing the radiation from the electric components in the product or by reducing offix base frame. In this degree thesis the focus is only on mechanical redesign.The main problems right now depends on the long distance between the screws, there is anisolating layer on most of the parts and the forces between the joints are too small. The mainfocus is to solve these three problems.The best solutions are when the whole base frame is more or less redesigned instead of onlyredesigning some of the connection points.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

Reinforcement is of great importance to fulfill the dimensioned strength of a concrete construction. This requires that the work needs to be carried out with adequate results that neither endangers the workers or the safety of the construction. Progressive development of the planning phase, construction documents, and construction methods is in constant need since the technology constantly evolves.In order for contractors to be able to get acceptances from their quotations requires that they have to increase their working pace in order to be able to leave a quotation with a lower price than the competition.Due to the increasing pace the different parts involved in the construction process is subjected to time pressure. The design stage, construction documents, work preparation and the execution are all affected when everything has to be finished quickly. To avoid problems, it is required that all parts are able to deliver good quality solutions and results under the influences of time pressure, which is not always easy.

Everywhere you look in today?s society many kinds of people are constantly interacting with each other. Especially in large groups of people working together, the phenomenon is even greater. In the construction industry there are many kinds of parts that need to come together in order to get sustainable and successful results. Therefore the relationship between the contractor and the construction client must be at its best.

AbstractThis thesis examines and discusses a sample of the medieval hypocausts (stone-heating ovens) in the Baltic area. The medieval construction is thoroughly explained as well as the antique hypocaust in order to establish a base for the following discussion. The medieval hypocaust has been almost forgotten for a long period of time. The last time someone dealt with this category of finds were in the 1960?s by Swedish archaeologist Iwar Andersson and in the 1970?s by Danish archaeologist Johannes Hertz.

Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

Dust that arises during the construction process is called ?construction dust?.People who are exposed for construction dust for a long period of time are atrisk to develop several forms of lung problems, allergies and cancer. Todayconstruction dust is a huge problem during the production in Skanska´srenovation projects. Every day workers are exposed of the unhealthyconstruction dust and it can cause lung problems and diseases after 10-30years. This is a problem that must be taken into account to obtain a betterworking environment on Skanska´s building sites.Skanska Sweden AB has given two students the task to investigate possibleproblems about the spreading of construction dust.

During the past decade Information Technology (IT) and Information and Communication Technology (ICT) have become the main tools in teaching. Authors and early educators who are treated in the study talks about how technology has come to change the school's approach to teaching and didactic tools. The technology has also affected students´ and teachers´ ways to work because the technology's versatility makes demands on the user's expertise and competence. The technical skills have long been associated as a male domain, where men are expected to master the technology´s versatility. These expectations are not the same for women.

Industrialization of construction is by some considered to be a solution to the building industry's problems about the lack of quality, high production costs, low productivity and poor environmental adaptation. Meanwhile, industrialized construction partly earned a bad reputation after the million housing program. As large-scale projects where promoted during this period, it worked very well to use the technique of construction elements. In the mid seventies though, criticism arose which claimed that the aesthetic qualities had been deprived in the corporates effort to make housing production as efficient as possible.Tyréns, Derome and CBBT (centre for building and housing in wood) cooperates in a development project to develop a building system for 4-8-storey buildings, consisting of three platforms: a technology platform, an IT platform and a processing platform. The technology platform consists of flexible, industrially built flat modules of wood and from this platform the subsystem stairwells, is broken out.

The purpose of this degree project is to study if there is a intentional work with technology in the elementary school, preschool to fifth grade, in a municipality. The work will also study what conditions there are in the schools in order to work with technology. 95 questionnaires were distributed to the responsible teachers in all primary schools in the municipality, from preschool to fifth grade. The results of the survey show that more than half of the respondents do not consider themselves to work with technology in the school. The conditions, in order to work with the school subject technology in the municipality, are primarily external such as: material, facilities and the ability to divide students into smaller groups.

The purpose of this report is to explore how modern technology can work againstolder craft techniques. The focus of the research will depend on what conditions areoptimal for cutting marquetry with laser technology. In my work I account for thehistorical background of the various techniques and then through own practical testsexamine whether the laser technology can complement the traditional techniques..

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

Purpose: The purpose of this thesis is to analyse the process of technology sourcing within firms active in the CRT-market. The primary focus of the study is the motives, risks and problems associated with technology sourcing, to construct key learnings for organisations consider undertaking this way to access research and development or those organisations that are already operating in the CRTmarket. Method: As method has abduction been used. The empiric material of the thesis is based on qualitative research in form of interviews in a conversational manner. For correct interpretation and understanding a hermeneutics approach has been used.

The aim of this Master?s thesis is to examine how representations of identity construction are performed through the characters in the novel Snabba Cash by author Jens Lapidus. I examine what means the characters are using, and how the identity construction processes are related to the idea of modern society. For a theoretical background I use sociologist Anthony Giddens? theories regarding modernity and self-identity, to study general identity construction.