Purpose: The objective of this study is to illustrate how participants in leaderless based projects communicate with each other. Several studies have focused on technology-supported projects, such as open source projects, with an established project manager and goal. There is a lack, to the best of our knowledge, in studies that deal with the communication pattern in a leaderless computer supported collaborative project.Method: We have chosen to use a quantitative method where we systematically group several messages according to their content. This method was used in a similar study to illustrate the communication between participants involved in an open source project. We have taken the same Kripendorff based method and adapted it to our study by adding more descriptive variables.Theoretical perspectives: Manuel Castell discusses the aspects of a new communication power that is rooted in the individual as part of a larger creative audience.

This thesis has examined the Tekla Structures modeling software and answered the question of whether it could act as a suitable modeling program for the design department at Bjerking AB in Uppsala. The method used in this work is a case study of a previous project with existing basis to work form. The demarcation of the study was to examine only the usability of the foundations of in situ concrete. The work examined three main areas within the design process. The first was to model the concrete elements then to model the reinforcing and ultimately production of the drawings. Because Autodesk Revit was the existing modeling program in the Department conducted the evaluation as a comparison between the two programs.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

The need for a more efficient electrical grid has made the smart grid concept popular in recent years. The aims of this study are to identify the conditions in Sweden for implementing a smart grid and to analyse the opinions of stakeholders. One finding is that the large capacity of Sweden?s existing electrical grid decreases the immediate need for smart grid solutions. However, the rapid increase in wind power might push the development of a smart grid in the coming years.

Construction production always contains different disciplines whose priorities andinterests can be very diverse. Good communication and coordination are essential tominimize misunderstandings and achieve good quality in the end result. This makesplanning a central part of the production management. In a world where conditionscan change as often as daily, being well prepared increases the opportunities to stayflexible and decrease negative effects of the changes.This study has been done in association with Skanska Foundations district North inStockholm in order to investigate how visual planning can be used in the productionmanagement to optimize the coordination and the quality.The history of Lean started at Toyota, but the concept are now spread over theworld and are used wide outside of the car industry nowadays. What?s challengingabout Lean in foundation projects is to embrace a long-term perspective and invest insolutions that are profitable in the longer term, instead of solve problems by onlytreating the symptoms.A holistic perspective is crucial in order to truly understand Lean.

Today there is a widespread opinion that the woodmarket and the forest industry are dominated by a traditional way of thinking and not adapted to the customers of today; a lot of products are produced purely on routine. Also, there is a demand for improving the quality of sawn woodproducts. AB Karl Hedin wants to sort this out by increasingly adapt their products to the demands of the market, i.e. through introducing a short wallstud of standard length, "Hedinregeln". At tirst, the wallstud will be produced in lengths of 2,70 m and of guaranteed quality.

This final thesis is carried out at BAE Systems Hägglunds in Örnsköldsvik. The mission was to construct and integrate a new semi-active damping unit in the terrain vehicle BvS10. Questions that came up during the process, among others, was how to mount the damping unit to the vehicle in a flexible way without exposing it to unnecessary wears.A generation of the concept is made in 3D using CATIA V5 of a possible solution to the problem. The idea is to weld the unit to the skid girder which is one of the main constructions of the track system. In this way the damping unit will come closer to the track system, which will partly protect it from impacts from below and minimize current problems with breaking forces in the torsion shafts.The complete construction was then analyzed, first by theoretical calculations and then with the FEM-tools in CATIA V5.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

NCC Construction Sverige AB är ett byggföretag inom NCC AB. Företaget är verksamt inom hus- och anläggningsbyggande, bostadsbyggande, bostadsutveck- ling samt service i Sverige. År 2004 hade man en omsättning på cirka 17,3 MDR SEK och antalet anställda var cirka 7 600. I varje byggprojekt finns alltid olika risker, vissa får större konsekvenser än andra. Ansvars- och entreprenadskador som inträffar i projekten kostar mycket pengar för NCC Construction Sverige AB.

The construction industry is often criticized to be an industry of narrowness and slow of change. The traditional construction process is considered to create gasps of inferior quality, delays and increase of disputes. Meanwhile, productivity is lower compared to other industries and the prices are increasing. In this debate, it has been assumed that the reported figures are monitoring a reflection of reality, but there might be an error in the statistics which suggests that the focus is at the wrong place. A study of the monitoring and the measurements of the results are to consider, instead of spending time and resources on issues and actions The Last Planner System is an executive planning tool which creates a predictable workflow and creating value throughout all the different stages.

This study concerns the complete oeuvre by the British author Helen Zahavi: Dirty Weekend (1991), True Romance (1994), and Donna and the Fatman (1998). Her novels are here read as a trilogy dealing with the dialectics of gender and violence in 20th century discourse, drawing on theories of how the construction of subjects is produced by power, of the relation between power and sexuality.The heroines of Zahavi?s novels try their best to move about in a world where their freedom of movement is limited to their female identity. In Dirty Weekend the protagonist tries to shoot her way out, claiming revenge on every man that is forcing himself upon her. She gains some freedom of movement by refusing subordination, but does not really change the order of power.

This essay focuses on the construction of so called "computer game addiction" or "computer game abuse" in the Swedish press during 2000-2006. During this period computer game addiction went from an obscure phenomenon to a legit reason for the involuntary commitment of a fourteen-year-old.The study's theory is based on several social constructionist ideas. Kitsuse and Spector's theories about constructing social problems as claims-making activities are used for understanding the actions of the individual and groups involved. Hewitt and Hall's article about quasi-theory is used to explain the construction of explainations for the new social phenomenon. Blumer's five-stage model is used for categorizing the construction of the new social problem.

Today there is no way of measuring or simulating turbulent flow in high Reynolds numberenvironments. The computational power required to simulate these conditions is not expectedto be available for several decades so instead the CICLoPE project aims at solving thisshortage by the construction of a long carbon fiber wind tunnel in which real measurementscan be made. To do accurate measurements it is of importance that the wind tunnel, 0.9 metersin diameter and 110 meters long, is as straight as possible.This master thesis treat the design and construction of a device which may be used to align thetunnel along a reference laser beam. A design is presented which allows the pipe to be alignedwithin about a quarter of a millimeter along its entire length. Contents span over severalscience fields such as physics, mechanics, control theory and electronics.The result is a theoretically correct design.

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.