The Swedish construction industry is dominated by men; however this is starting to change. The average age of Construction Engineers is high and approximately 40 per cent of the employees will retire by the year 2015. Currently, female engineers dominate the graduating classes of Swedish Universities but this is not reflected in the Swedish Construction industry.With so many female engineers available, why is this? Does it require a change in company culture and their condition of work to attract them? Is it the attitude towards women in the industry among the employees that has to be changed? Or is it a woman?s thoughts and prejudices of the industry that creates obstacles?The purpose of this final thesis is to describe how contracting firms in the construction industry can make themselves more attractive for female engineers. To reach the purpose, a study among salaried employees and craftsmen was conducted.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

The purpose of this study is from a case study develop a model that aims to cost effectively improve productivity in a manufacturing production process. The study highlights the importance of having knowledge about customer needs and using a holistic process perspective when improving productivity to identify the relations between the process stations and by this find problems that cause waste and losses in productivity. Tools and methods used to make production more efficient such as single minute exchange of die, spaghetti diagram, 5s and master production schedule is presented an applied in the model to see how these effect costs, productivity etc.Maintenance effects on quality and productivity in a manufacturing company will as well be covered in this thesis. The results and conclusions finally reveals how the process improvement tools, maintenance and production planning for example effects each other and why it is important to establish an attitude in the company where continuous process improvement should be emphasized..

E-Series 450 is a chainsaw designed by Husqvarna AB to the semi-professional user. Husqvarna is a world leader when it comes to chainsaws, trimmers, lawn mowers and garden tractors. The problem in hand can be addressed by the question. ?How easy can we start a chainsaw? The purposehas been to provide a solution to the question above and give Husqvarna a good base of which they can continue towards a finished product.

Approximately ten people die every year at building sites in Sweden. Every year TheWork Environment Authority (Arbetsmiljöverket) receives 3200 accident reportsfrom the construction sector. The Swedish building contractor Skanska has the vision:?Zero accidents?. Only at Skanska Sweden, where this diploma work is preformed,350-520 accidents and mishaps are reported every year for the last 5 years.

The purpose of this thesis is to study to what extent the methodological theories are being reflected in the construction of user surveys at public libraries in Sweden. The study has been conducted as a qualitative literature study in two parts. The first part is an examination of literature concerning survey methodology; the second part is a study of three user surveys conducted at Swedish public libraries after 1995. Our main results indicate that the theories about methodology are followed in part, though it cannot be determined whether this is due to any actual methodological studies, common sense, or just copying other surveys. In our study we have found some areas of user survey construction that need further attention and that would benefit from more extensive methodology studies on the part of survey designers.

This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.

Purpose: The purpose of this study is to investigate the innovation process of companies, and to analyse how important success factors and obstacles are in their innovation process.Method: The investigation strategy used for this essay was to interview companies that work with innovations. The essay has a qualitative approach. Both primary ? in the form of interviews - and secondary data ? literature found in books, scientific articles and internet - have been used to achieve our results.Results: The result of this essay is: there is not just one inovation process that is applicable to all companies. On the other hand, there are some guidelines that could be followed in the process.

E-Series 450 is a chainsaw designed by Husqvarna AB to the semi-professional user. Husqvarna is a world leader when it comes to chainsaws, trimmers, lawn mowers and garden tractors. The problem in hand can be addressed by the question. ?How easy can we start a chainsaw? The purposehas been to provide a solution to the question above and give Husqvarna a good base of which they can continue towards a finished product.

People are given better opportunities to participate in polity today. Democratic equality entails that all individuals are equal and therefore they should be included in the process of making the decisions. How can participation be defined and does it mean that having the possibility to participate means that people can influence the process of making the decisions in polity process?This paper focuses on participation and influence in polity and examine the relationship between having the possibility to participate and having the possibility to actually influence polity process on more local level. Therefore I have been examining the citizens? participation and influence in Helsingborg which is my case study.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

Approximately ten people die every year at building sites in Sweden. Every year TheWork Environment Authority (Arbetsmiljöverket) receives 3200 accident reportsfrom the construction sector. The Swedish building contractor Skanska has the vision:?Zero accidents?. Only at Skanska Sweden, where this diploma work is preformed,350-520 accidents and mishaps are reported every year for the last 5 years.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.