The purpose of this paper is to describe methods to computerize a library and to compare theory with a process in a school library. The case study is based on a school library called Sunnerbogymnasiet which is situated in Ljungby. My questions are;- Which methods are parts of the process to computerize a library?- Which methods are used in the process in Sunnerbogymnasiet?- What does the practical process look like compared to the methods described in theory?In the paper I present the methods in the process according to the studied literature and compare these with a process at Sunnerbogymnasiet. The most significant result is that cooperation between the school library and the community library was the most important reason for the choice of library computer system.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

The industrialization of construction is increasing in Sweden which leads to higher demands of prefabricated components and cells. But what does the business of construction think of the industrialized business and what can be done in order to decrease faults and errors with these products? Today we have many manufacturers who have different technical solutions which might lead to difficulties when assembling components and cells at the building site. But by trying to make a more opened market, with possibly standardized connections details and improving the communication between the different participants, the prefabricated components and cells can be made and assembled with less errors. This is something that needs to be done in order to establish a more secure business, and especially when working with new companies and methods, when using industrialized products..

Highland Group AB was helping a customer of theirs to create an All-Terrain Vehicle (ATV), a project Highland has never been involved with before. For the wishbone arms of the wheel suspension, traditional manufacturing methods and tubes with cylindrical or square shaped cross section was preferred. We performed a simulation where the ATV was driving on a bumpy road too see the forces involved. With the results we proceeded to calculate the strength of the concepts to find out which is best suited for the tough environment in which the ATV is used. The concept that turned out to be the best was a wishbone made of circular cross section, which had good structural strength and did fulfill the demands that we required for the construction.

The theory that concepts that are interpreted subjectively in building care creates problems in how the concepts are defined in practice within the current governing documents and guidelines for building care. This essay has studied concepts in the building maintenance literature to investigate whether there is consensus in compliance practice within the building process. In the study, 9 concepts have been investigated through conversational interviews and questionnaires answered by practitioners with extensive experience in building care processes. In the survey, an attempt is made, to measure how big or small the consensus is between practitioners who often need to collaborate within the building maintenance process. The investigation shows that existence of the concepts in building maintenance is very common in the theoretical literature examined but is almost completely absent in the craft area. Since laws, regulations, principles, and guidelines have defined concepts to support the decisions in the building maintenance process, it can be concluded that there is a lack of practice for compliance.

This report is a documentation of a Master?s thesis of 20 credits performed at the educational program of Technical Product- and Production Development with Design at Halmstad University. The project is carried out in cooperation with Hafa AB in Halmstad.The purpose of this project was to bring forth a concept of a bathroom cabinet for Hafa?s new selection Young through creative design methods. The selection is supposed to attract the younger purchaser but also a target group that dare to experiment with home furnishing and appreciates new design.

This thesis has been carried out at the Building and Civil Engineering Programme at Chalmers University of Technology in cooperation with NCC Technology. The study aims to investigate the optimal design of a library of standardized structural solutions for in-house multi-family buildings and what benefits it brings. Today NCC use technology platforms to improve efficiency and simplify the Construction process. The platforms provide the constructors guidelines on how construction details should look like, but the details are not complete. NCC Technology started in the spring of 2013 a project to investigate what benefits there are to create a library of standardized structural solutions for the constructors, with more detailed solutions than in the platforms.

Title AB Volvo Pentas packaging system ?process and packaging logisticsAuthor Peter Powell, Lund's Technical CollegeSupervisors Annika Olsson, Lund's Technical CollegeJan Svensson, AB Volvo PentaProblem - Packaging requirements ? Which requirements are there, how do they affect each other and how are they fulfilled?- Packaging process ? what is the line of action when developing new packaging and making adjustments in existing ones? Who has the responsibility to do what?- Packaging logistics ? How is the packaging system adapted to transport efficiency and handling?Objective To create an overall picture over how the packaging system affects and is affected by different functions and players within and beyond the company boundaries, to give a clear picture of how changes in the packaging system is made today and how it could work and finally to give suggestions for cost savings affected by the packaging system.Method The methods used for this thesis has mainly consisted of action research and at some extent case studies. As a previous employee at the department of logistics at Volvo Penta I?ve taken part of the environment, information and prerequisites that this thesis discusses on a daily basis. Case studies have been used for the collection and analysis of data concerning packaging logistics as I?ve chosen to consider only specific markets and packaging.Conclusions This thesis has highlighted the demands that are placed upon engine packaging throughout all concerned units and how these demands affect each other, positively and negatively.

This report is on concrete work during the winter and is implemented on Peab?s behalf. The assignment was to describe the differences between a summer- and a winter casting. While it shows the complications that exists, it also show what aids are available, both electronic via computer and physical aids.The information that I have developed is originally from theory in books, information on the internet as well as practical experience from knowledgeable people that works in construction output. Other theories are those I have learned throughout the education to become a construction engineer, including all oral sources over the years.The results I have come up with, I hope will be able to help future construction projects in the planning phase of a winter casting.

Virtual communities are a phenomenon that is becoming more common as the information technology comes with in reach for the general public. This report will bring the theories and construction of a virtual community together. The purpose of this report is to describe the different theories that have emerged from the research within this field and to examine the work procedures that have been used during the development of a site for a MDA-community. The MDA-website is a homepage on the Internet that was developed to bring the students closer together. The report describes the work of the project group, why the website was not completed and at the end the theories are looked at on the basis of the construction of the website..

The so called ?ByggaF-method? is a relatively new Swedish method to stop moisture from being built into a building. The method should prevent damages on buildings as a result of mould growth and moisture. The purpose of the method is to include moisture control in the entire constructionprocess, from the projecting phase and all the way to the management phase. Up until now, there is no proof if the method is profitable or not and no studies have been made on the topic.

AbstractHeadline: Young trouble and teenage love (Fjortisgrubbel och tonårskärlek)Number of pages: 37Author: Annika IlmoniTutor: Amelie HössjerCourse: Media and communication CPeriod: Autumn 2007University: Division of Media and Communication, Department of Information Science, Uppsala UniversityPurpose/aim: The purpose of the work was to produce a comparing study of two Swedish teenage films from different periods of time, 1970 and 2005. An analysis was to be made of how love between teenagers as well as the heterosexual relationship in general was depicted in each of the films and further investigate the gender construction in both films.Material/method: With the intention of narrowing down the complexity and make the evaluation more lucid 5 scenes from each film were used for comparison, these were chosen through the Anglo Saxon dramaturgy. To make the scenes more comparable 4 factors were used for analysis in each scene, these were: clothes, recreational activities, behaviour and environment. Beside the above given factors the heterosexual relationship were analysed and compared in each of the scenes through the theory of dominance in dialogue.Main results: The gender construction occurs obliviously in the older film from 1970 while taking place in a more conscious way in the film from 2005. Further on the heterosexual relationship is perpetually depicted in the 70?s film with a submissive girl and predominant boy, the same dominance is easily seen in the more recent film but with a higher rate of equality as the girl is portrayed as the dominant character in almost half of all scenes.

This essay is written in order to expose the construction of collective identity in textbooks for Swedish as a second language. To help visualize the process that shapes and categorize sub-jects based on a relational identity formation I assume mostly from Ernesto Laclau and Chan-tal Mouffe's discourse analysis theory frame. The paper called it as discourse theory. There are two textbooks in Swedish as a second language to be studied. Based on the textual materi-al found in the textbooks I perform a discourse analysis involving mainly focus on relational identity construction.

There is a lot going on in the construction business right now. It feels like everywhere you turn there is a building sight. Furthermore the business is heading a generation change and the need of recruiting new construction engineers is huge. How is the business going to handle the transition that they are facing? The question has been in progress for at while and I wanted to find out what the current students feel about taking the step into the working life and replace the veterans.A research is made about student?s opinion about their education and future work life.

Sammanfattning Detta arbete beskriver de studier som utförts vid implementering av Last Planner planeringsmetod, i projektet att bygga LKAB:s flotationsanläggning i Svappavaara. Studien har bedrivits vid institutionen för Samhällsbyggnad i Luleå och LKAB:s malmförädlingsverk i Svappavaara. Arbetet inleder med en granskning av litteratur om teorier och grundtankar om Lean Construction. Filosofin bakom Lean Construction bygger på att avlägsna alla processer som inte skapar mervärde för kunden. Tankegångarna kommer från den Japanska bilindustrin och då främst från Toyotas framgångsrika produktionssystem TPS.