This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

At present Getinge can offer a new generation of trolleys that they produced in 2011. The trolley used to Getinge various autoclaves and has the primary task to help the user/sterilization personnel to transport shelves or baskets, with or without cargo, from a packing table to the autoclave. The purpose of this thesis has been to develop a primary solution how the docking process between Getinge trolleys and autoclaves can be improved. The work has in most part followed Fredy Olsson principle and primary construction method. The work has included product research, study visit and development of a requirements specification, to satisfy Getinge, their clients and circumvention products requirements.

Adjustment to acquired hearing loss can be understood as a process of learning and change where the point of departure is the subjective apppraisal of a person?s hearing loss in a social and cultural context. The aim of the study was to describe women?s thoughts, emotions and actions prior to audiological rehabilitation, since these are considered important for the ongoing process of adjustment and for the planning of rehabilitation. A phenomenographical approach was used in order to describe the variation in the women?s attitudes before attending rehabilitation.

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

The Swedish National Rail Administration has changed in the past decade, from its origin after a less dramatic separation from the Swedish State Railways to becoming an authority with its own identity. Today the National Rail Administration is a large organisation with several different departments, each with its own unique function. To operate train services the railway needs to be ?in shape?, leading to a need for maintenance, reinvestments and new investments. For this purpose, the National Rail Administration carries out public procurement where contractors, who are able to perform maintenance and new construction, submit tenders.

The purpose of this thesis is to examine the organizational buying behaviour in the purchase of travels abroad. We have conducted a case study of two companies, one medium sized and one larger. Our empirical studies have shown that the companies? buying process is divided into two types, the process of recruit a new travel supplier and the process of a straight rebuy of a regular travel service. In the recruiting process we found that the evaluation process of the purchase is an ongoing process that contradicts estab-lished theories.

Bravida is one of Scandinavia's leading suppliers of technical installations and services. According to Bravida an installer loses around 35 per cent of their daily work. It?s the time aspect that?s going to be examined in this thesis. The purpose of this thesis is that the student in question is to investigate the activities of the installers that works with this project, identifying where and how time losses occur and come up with suggestions for improvement.Methods used in this work is literature studies, observational studies and interviews.

I want to, but how? My work is a research of the creative process. I have asked myself how ideas take form and how materials can become bearers of ideas. The work has been treated as an action rather than an object. The result shows my research and my interpretation: the process and result are the same..

The aim of this study was to create a greater understanding of apostates, by analyzing narratives of five ex-members regarding their exit from Jehovah?s Witnesses. I conducted interviews to gather descriptions from specific individuals in relation to their experiences, mainly focusing on the role of an ex-member of a specific group. The informants in the study were 38-73 years old, three women and two men. The empirical data I collected was later coded through qualitative content analysis, where central topics and themes formed the basis for the analysis of the results.

This report addresses the growing need to adapt the medical healthcare to the new possibilities that can be accomplished by incorporating a web aspect to the personal treatment plans of patients. It describes what implementations that need to be considered in order to successfully convert to a partially web-based treatment.The report also reflects the potential economical gain that can be made by keeping the communication between the patient and the doctor frequent. It also takes into account the personal gain to the patient by increased feedback and easier ways to communicate with their attending physician and thereby increasing the quality of their healthcare and service.The construction of a prototype of the system required is also included in the report as a description of construction and functionality of the prototype along with results and estimated outcome..

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

The main goal of this project was to develop some sort of a diverter for pipestransporting waste in a vacuum system. This unit was supposed to be both cheap andeasy to serve/exchange worn out parts. With a limited space to install the pipeexchanger, the challenge was to keep it as compact as possible without constructingbends with to small radius or to sharp angles as this would wear out the system a lotfaster than planned. The system was also supposed to be able to handle clothes andscrubs from hospitals. Having too much sharp edges or angles would tear the clothesapart.