The survey aims to shed light on traditional and contemporary bottom floor frames, their construction and different insulating materials; mineral wool, wood shavings and charcoal. The purpose is to analyze and discuss the similarities and differences as well as the pros and cons with a focus on the construction and the different insulating materials. The work has been limited to comparing two different wooden floor frames. The first one is based on a real floor frame from an older building, this example is presented as the traditional floor frame in this study and are from around 1940. The other floor frame is presented as a contemporary floor frame and is based on wood building type descriptions and literature.

In this thesis the construction of identity within the EU is discussed. A thesis problem in three dimensions is used to explain the purpose of the construction, its realization and the consequences of such identity. These aspects show the complexity of the problems related to identity construction on a structural level.By using a post-modern and a social constructivist theoretical approach identity is presented as socially constructed by discourse. The theory of discourse makes it possible to analyze the development of an identity forming discourse within the EU and its status today.With an approach inspired by critical theory, we use discourse analysis as a methodological tool to illustrate the ideas that govern discourse, and in what way it is related to the social reality.The analysis states that the purpose of identity constructing is the striving for legitimacy. Without identification, the legitimacy is threatened.

It?s a fact that the climate is affected by the vehicle that runs on the worlds roads. But theconstruction of the road itself is rarely thought of as a climate threat. Svevia and the Swedish roadadministration have opposite views of how the construction of roads should be carried thru. It?sthe difference between those two construction methods that is the base in our thesis.The amount of energy use or the emissions are not analyzed for neither the Swedish roadadministrations nor Svevias construction models.

Requirements management is an important part of the software development process. The success of a project may depend on how this is handled. Even though several research studies indicates that more attention should be paid on non-functional requirements, the primary focus in practical projects still regards identifying functional requirements. Especially the prioritization of the non-functional requirements has been proven to be of great importance for the success of a project.This report investigates basics in agile requirements management involving opinions from experts from a software development company. This is done with help of existing literature and interviews with key actors involved in prioritization at the company.

This report deals with activities that from a CSR perspective are considered to create a shared value for a medium-sized construction company in Sweden. The CSR definition used in the report is the European Commission?s since it reflects the valuecreating aspects of CSR, in contrast to the traditional philanthropic aspect of CSR.Companies in the building construction industry have difficulties identifying activities that create value in society and in the company. The aim with the project is to, from a CSR perspective, identify and evaluate value creating activities in a building construction company. The activities will be evaluated with respect to competitiveness and how they can be implemented into an organization.

The purpose of this study was to gain a better understanding of how medium-sized construction companies adapt and how they choose to reorganize their operations in relation to the recession. The study has as its theoretical starting point theories about organizational learning, the impact of the economy on construction companies and strategies for dealing with recessions. The method used to conduct the study was semi-structured interviews with representatives from 15 different construction companies. The results of the study show that they used several strategies to adapt and reorganize the business in accordance with the recession. Some construction companies had to make cost savings as a result of the recession.

This exam report contains studies about how the weather affects the construction site from a planning and productivity perspective. In 1960?s the contractors started to build during the winter, since then the demands to obtain a good construction has been higher on both the contractor and then promoter.In this report you will see how the different actors at the construction site handle the weather problems. By several interviews of the actors at the construction site there have been opinions about the weather situation which has been collected. To get a wide perspective of the problem, field studies from four different construction sites been made.Weather statistics over Halmstad is a mayor part of this report.

This report deals with activities that from a CSR perspective are considered to create a shared value for a medium-sized construction company in Sweden. The CSR definition used in the report is the European Commission?s since it reflects the valuecreating aspects of CSR, in contrast to the traditional philanthropic aspect of CSR.Companies in the building construction industry have difficulties identifying activities that create value in society and in the company. The aim with the project is to, from a CSR perspective, identify and evaluate value creating activities in a building construction company. The activities will be evaluated with respect to competitiveness and how they can be implemented into an organization.

Safety in the construction industry has become a question of top priority in recent years. Despite a massive investment of time, money and knowledge, the occur-rence of fatal accidents in Sweden alone is around one a month.The purpose of this study is therefore to improve the safety on the construction site. By an examination of the role of the safety agents and their cooperation with the construction workers and supervisors as well as examine how safety agents can improve safety on the construction site, which is the goal of the study.Four questions were formulated based on the purpose and the goal of the study.The methods used to answer the questions were a questionnaire survey, multiple interviews, a literature review and a document analysis.The report describes the safety agent?s role as a complex one with many different tasks. The role of the safety agents is regulated in the health and safety law, but it can sometimes be difficult to interpret and the agents can therefore interpret their role differently.

In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.

This report describes the construction process and the aspects that should be taken into consideration. It includes models of decision and how these can be used in practice. Planning of a building project is very important for a successful execution. This will be the foundation of problems that will occur during the production. In the planning process people with different positions, search for the best suitable building methods.

Title: The way to successLevel: Final assignment for a Master?s Degree in Business AdministrationAuthors: Larisa Glazkova and Veronika LarssonSupervisor: Jonas KågströmDate: 2011 ? JanuaryAim: Many companies are started each year, but only some of them are successful and generate worthwhile profits. Many new companies do not survive the first few years. The purpose of this thesis is to identify factors that can lead to success for small and medium-sized enterprises in Gästrikland.Method: We analysed 559 interview surveys that were collected during the years 2004-2010 and success factors were defined. Additionally, financial reports from the database Retriever were analysed.

The construction industry depends on functioning logistics; if the logistics isn?tworking the construction site will risk to be interrupted due to material shortages orproblems with deliveries. Despite this, the construction industry is battling logisticproblems daily. This problem is very time consuming and costly for the companies.These theses are written for Peab Bostadsproduktion and investigate if it is possibleto focus on logistics earlier in the building planning process to reduce the problemsthat occur. Peab has partnerships with three companies that could be helpful for themin the work of reducing logistic problems.

The construction industry accounted for 19 % of all work-related fatalities in Sweden between 2010 and 2013. The exam report has been done to find out what underlying causes there are to the high number of fatalities and to the occupational statistics of the construction industry. Moreover it has been reviewed what improvements can be done to reduce accidents and fatalities in the construction industry. The report consists of a survey of statistics, laws and regulations affecting the work environment and of literature concerning the subject. It has been conducted an interview and a questionnaire survey at the construction company Asplunds Bygg and an interview with an inspector from the Work Environment Authority.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.