The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

This essay deals with ruins from the perspective of their cultural values ??and the impact of add-ons, protective add-ons and caring actions affect these values. The issues in the essay are; What are the cultural values of a ruin?  How have ruins been used?  How are ruins treated today?Initially the definition of the concept ?ruin? is discussed, what is a ruin? A building has an architectural biography: the creation, destruction, change and the decay. The concept of ruin is considered to be a state of this decay, rather than a dead building.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

What gives a place meaning for it?s users? The intention of this paper is to investigate how landscape architecture is able to form places that evoke involvement from it?s users. Ideas within architectural theory such as territoriality space and place is being explained and used when analyzing several different case studies. The places for my case studies are all distinct in their expression and can all most be treated as objects on their own. In my case studies I came to the conclusion that a designer can work in many different ways to create a site that appeals to it's users, but that it is the sites that allow users to interact that become meaningful places..

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

Urination is a biological need but the routines surrounding urination are culturally specific and ever changing. This makes the organization of public space an important part in deciding what actions are made possible for the people in it. This paper considers women?s public urination and the possibilities to merge the need to urinate and the construction of the female body as feminine.A number of texts that describe the construction of the female body and identity as both gendered and socially produced are analysed in relation to women?s experiences of incontinence. Incontinence as a medical diagnosis is by this becoming possible to question, and may be seen as one of several strategies used to manage both the organization of the public space and the expectations of the female body to be a docile body.The conclusion is that a woman who wants to enter public space has the following options when it comes to the need to urinate:To strive for the feminine ideal.

TitleEnergy-efficiency ? of slab blocks built in the sixtiesAuthorsRichard Sandahl and Kim SöderbergEducationHalmstad University, Section for economy and technique Construction Engineering 180 ECTSSupervisorMargaretha Borgström, Universitylector construction physics, Halmstad UniversityContact person at HFABUlf Johansson Heating, sanitation and energy co-ordinatorReportExamination paper at the construction engineering program is performed in cooperation with HFAB (Halmstad real estate concern Inc.)AimThis examinations work is done in cooperation with HFAB and there project on the block around the street Maratonvägen. HFAB:s dwelling stock on this area are going through a bigger renovation and in relation to this they are looking on the possibilities to make this building more energy efficient. That is why this examination paper has as purpose to answer the question if it is possible to make slab blocks built in the sixties more energy efficient. This is done by calculate energy efficient measures on a chosen apartment block at Maratonvägen in Halmstad, in an energy and expense perspective.MethodThe examination paper is based on different methods, mainly calculation but also qualitative conversation studies, economic calculations and literature studies.

In recent years the construction industry has been exposed to increased time pressure which has resulted in a higher amount of wastage. Today 35 % of all construction projects in Sweden is "wasted". Time pressure has risen due to increased competition on the market, with more actors entering the construction business, therefore profit margins decreased which has led to a more pressing need for decreasing the amount of wastage.Bravida is Scandinavia's largest supplier of installations and provides specialist services in electrical installations (heating and sanitation), and ventilation. Mahdi Bawaqneh's task was to investigate where, how and why wastage occurs in the company's projects and how to prevent such wastage. The thesis covers the subjects of lean production, communication in projects and planning of projects.

The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

3D, 3D-projektering, IFC, Revit, Navisworks, Cad-Q.

This thesis tries to clarify why more houses such as passive houses is not built and at the same time the differences is described with the conventional construction as a starting point. Sweden has set environmental objectives to reduce energy consumption in buildings by 50 percent by the year 2050 compared to 1995. The passivehouse concept could have a significant role, particularly in the reconstruction of buildings with high energy consumption. For sustainable building the passivehouse technology is an economically viable concept while benefiting the environment. Initially an introduction is given of the background to the problem, purpose and objective of the thesis.

AbstractBachelors thesis, Bygg och fastighetsekonomprogrammet vid Högskolan i Halmstad Vårterminen 2009Authors: Emma Stenberg och Emma SvenssonTutor: Sven-Ola CarlssonTitle: Ägarlägenheter - en framtida investering Background and problemThe concept of owner?s apartment has been discussed in Sweden since the 19th century. It was not until the first of may 2009 that it got legislated to be allowed in Sweden. The concept that people should be allowed to own their apartments instead of owning a part of the tenant-owner?s association is a new phenomenon in Sweden.

Urination is a biological need but the routines surrounding urination are culturally specific and ever changing. This makes the organization of public space an important part in deciding what actions are made possible for the people in it. This paper considers women?s public urination and the possibilities to merge the need to urinate and the construction of the female body as feminine.A number of texts that describe the construction of the female body and identity as both gendered and socially produced are analysed in relation to women?s experiences of incontinence. Incontinence as a medical diagnosis is by this becoming possible to question, and may be seen as one of several strategies used to manage both the organization of the public space and the expectations of the female body to be a docile body.The conclusion is that a woman who wants to enter public space has the following options when it comes to the need to urinate:To strive for the feminine ideal.

This is a thesis written for a master's degree at the Computer Vision Laboratory, University of Linköping. An abstract outer product is defined and used as a bridge to reach 2:nd and 4:th order tensors. Some applications of these in geometric analysis of range data are discussed and illustrated. In idealized setups, simple geometric objects, like spheres or polygons, are successfully detected. Finally, the generalization to n:th order tensors for storing and analysing geometric information is discussed..