AbstractThe aim of this examination paper is to get an overview on the ?no-maintenance? windowsthat exist on the Swedish market, like plastic and aluminium windows.By way of introduction the reader gets knowledge in the background and problemformulatethat this subject has. This introduction explains why it has become so popular to changeyour windows into plastic- and aluminium windows and there is an existing scepticismagainst PVC and aluminium as construction material for windows.The main part of this report is constructed by segments of interviews where bothproducers of windows and stakeholders gets to answer questions about their viewing onno-maintenance windows from a material and construction point of view and where theproduction is headed to in the future. This is followed by an evaluation of a questionnaireon how pleased the house owners that changed their old windows to no-maintenancewindows are, followed by an inspection of windows made up from wood and an aluminiumclothing, windows made from only aluminium and PVC-based windows. It ends with atheory part about the materials PVC and metal based upon facts included in literature.By reading this report you can draw the conclusion that no window can be entirely nonmaintenancebut that the materials PVC and aluminium still are good substitutes for woodto lessen the maintenance..

The following article consists of two parts; one part is about house construction and the other is a specialization about radon. The house construction part describes how to project a house from start. It contains the conformation of the house, the installations needed, calculations considering the strength of the construction, energy calculation and what materials were chosen. Calculations considering the costs of building and operate the house has been carried out. The result showed that the house would cost approximately two million Swedish kroner to build and thirteen thousand kronor a year to operate.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.

With a new digital world that runs parallel with our physical one, we are also facing a new type of architecture and new materials that this new architecture is built on. In this thesis I examine pixels and vectors, two of the digital materials used to create pictures. By approaching them as digital materials, I have mapped their different qualities, when and where one or the other is more or less applicable and the reason behind it. My main research question asked was the following: Are the (digital) materials challenged outside their primary fields of application, and in that case, in which way? With this question in mind, I carried out a semiotic picture analysis on four pictures, later on dividing them into four different categories, based on their different qualities and their ability to deliver information.

Everyone has to take a greater responsibility in energy issues, both individuals and companies. There have been some major developments in the construction industry but there is still a lot to be done. This diploma work thesis presents different methods of making existing construction shed establishments to use less energy. What is possible to do and how much energy is there to be saved? A shed establishment consisting of 8 shed units were studied in this project and the building simulation tool VIP-Energy was used to simulate different types of material in the sheds. An infrared camera was used to locate thermal bridges. There are several factors that can be improved to make a construction shed establishment to use less energy.

The viscosity of air buildings is a hot topic within the construction performers, which the industry feel they have too little knowledge about. This study is mainly aimed against air density in apartment buildings and airflow measurement. The study consists of a theoretical reference, educational visit, interviews and a survey conducted among construction workers at Magistratshagen in Linkoping.Earlier requirement in terms of air leakage through the climate screen was removed and today there are only energy requirement for a dwelling in Boverkets Building Regulations. The difference between a passive and a typical air tight construction is that the passive house have a maximum requirement of 0.3 l /s m2 of air leakage through the building climate screen. The requirement imposed on passive houses is to minimize the supply of power and energy for heating the building.Air tight constructions have heavy demands on the performance and accuracy of everyone involved with the project. The client must specify their requirements and also be prepared to pay for any additional costs. The architect and building planners have to design the building with regard to air tightness. Finally, the construction workers are required to do a careful work in order to get all the connections in the building air tight.The study suggests that an air tight building is a closed system where no forced ventilation exists. There are no reasons not to build too tight as long as there is a functioning ventilation. In this study the authors ask themselves how an air tight building changes over time. No theoretical information has been found on these changes, but the respondents assume that air density decreases with time. The deterioration is mainly assumed to be caused by Construction materials changes over time. The study shows that construction workers knowledge of air tight construction is mixed, which they themselves admit in the survey..

This term project addresses how to develop construction drawings for a general contract. The project contains supervision, including blue prints as support as needed.Apart from directions on how to carry out the actual work, the supervision also discusses regulations governing all construction drawings. The supervision is created as guide for similar projects.The construction drawings is a complete construction guide, hence it includes all construction drawings. In addition, a room description and a general description is included..

In the current situation a big part ofthe settlements that exist in Sweden isin need of renovation and energyefficiency in order to survive.Therefore, also many of the older houseswith a wooden structure are in a need ofenergy efficiency, which can be done ina variety of ways, including addinginsulation.This project deals with whether the useof a diffusion barrier or a vaporbarrier affects a wall structure byadding insulation to an older house witha timber frame. The insulation materialswhich are concidered in thisinvestigation are mineral wool and woodfiber insulation. Efforts are focused onthe effects of moisture on theseinsulation materials.To demonstrate the differences thatarise the moisture measurement programWUFI have been used to simulate avariety of wall designs. These designsare developed in consultation with theconstruction carers who are active inthe industry.Using WUFI graphs illustrating themoisture levels of the wall structureswere obtained and from these conclusionsvould be drawn. The work demonstratesthe differences that arise when using adiffusion barrier or vapor barrier inwall construction.

The purpose of this study is to examine two educational materials from different decades, to see if they have a conscious gender and equality perspective, and to see if they have followed the development society made regarding gender and equality. Even the curricula have a part in my study as I will relate them to the educational materials. Equality as a concept means briefly that women and men should have the same conditions, and gender depicts our notions of femininity and masculinity.I have chosen to do textual analyses, focusing on multimodal discourse because I analyze both text and image. I also use both quantitative and qualitative methods.My questions are: In which way do the curricula and the educational materials express equality?; In which way do the curricula and the educational materials express gender?; Do the educational materials express the fundamental values written about equality and gender in the curricula? And, if this is the case, does it mean that educational materials have followed the development of the Swedish society?The conclusion of this work is that equality and gender are presented as goals in both curricula, but the new curricula have developed that section more.

The following essay aims to determine what textbooks and teaching media educators in the county of Västerbotten use when teaching the relation between religion and science. Based on educational science theory and through analyzes of factual texts, the teaching materials was examined to determine how much focus they put on the thematic of religion and science. The result shows how the different teaching materials affect this thematic differently. The main conclusion is therefore that students in Sweden could, depending on the teaching materials used in their education, be taught by different standards to reach the same requirements..

This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

Unlike the manufacturing industry, the construction industry is always in motion. Each new construction project brings new opportunities, and it requires a new plan, new organisation, and new suppliers. All construction projects are very different from each other and in terms of a logistical perspective, this is very weak as it makes it difficult to get a flow in the production and to make flawless routines. The way the external and internal logistics are managed, can effect the final product in the time taken to produce it, the quality of the product and the profit made from it. When internal logistics are handled poorly, it could result in materials not being at the right place at the right time, or information not going through to the right person.

This paper investigates the grammatical construction intransitive motionconstruction with GOAL as it is used in Swedish (Swe. intransitivrörelsekonstruktion med MÅL).I examine in which ways the construction is productive, i.e. thepossibility to use the construction with new verbs as well as withordinary motion verbs with new functions. The notion of productivity isbased on the construction?s type frequency and semantic openness(Goldberg 1995, 2006; Barðdal 2008; Bybee 2010).

The purpose of this work is to investigate how 4-5 year olds perceptions of materials and material properties can be developed through an educational activity. The study is based on two interviews with eight children in that age category. The interviews were conducted before and after an activity where the children were first introduced to the subject by the tale of The three little pigs (Harris, 2009) and then given the opportunity to explore various materials related to the book. The kids got to experiment and explore how water affected materials and to compare different materials properties. The children were also attracted to build and create the material that was offered during the activity.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.