The aim of this study is to investigate which management control mechanisms evolve in companies that receive funding from Venture Capital companies and why the management control systems evolve in the way that they do. A case study was performed on three Swedish high technology companies, that all received funding from Venture Capital companies for the first time in 2006. Merchant?s framework, defining all management control mechanisms as either, results control, action control or personnel control, was used to structure the study. Results show that the companies that received Venture Capital all increased the use of management control mechanisms within results control, action control and personnel control.

This thesis examines and measures differences in effciency between L1- and L2 language use for solving referential problems. Quantitative measures used in the study were time and error frequency. Qualitative measures, such as how the tasks and the participants own performance were experienced, were measured by an post interview and two questionaires. Two different tasks, a sorting task and a construction task, in which each informant was given the role as a constructor or instructor, were used for data gathering. A total of 20 dyads, divided in two language groups (English and Swedish) participated in the study.

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

One of the most crucial entries in the financial statements is revenue. Despite the importanceof revenue a lot of mistakes are made concerning this entry because of the extensive room forjudgements. Especially in the construction companies where a lot of differences exist due tothe fact that different standards are used for similar business transactions.The research concerning IFRIC 15 and the new upcoming standard for revenue recognition isnot very extensive. Studies including both IFRIC 15 and the new standard are even morelimited. Therefore this study aims to compare the effects of IFRIC 15 and the new upcomingstandard for revenue recognition, Revenue from Contracts with Customers, in three Swedishconstruction companies.

Stenebergs sockerbruk is a large log-timber construction, purpose built as a sugar refinery in 1739 and is one of Sweden's oldest industrial buildings constructed entirely out of wood. Despite receiving the status of a listed building (in Swedish: Byggnadsminne) in 1977, there exists today a surprisingly low amount of documentation of the building itself. In order to enhance the existing and lacking building documentation, this case study aims to shed light on the building's log-timber built frame, focusing on how it was constructed, how the long lengths of its walls were handled and what type of joinery and tools were used. A thorough investigation of the building is conducted on site, followed by gathering of information which is then presented through text and illustrations. The findings indicate the orientation of timbers, location of joints and scarfs as well as tool marks which together contribute to the forming of a basis of understanding of the building's construction..

Communication can be heard in many different ways and it is important for all businesses, especially in B2B. The construction and maintenance of a brand plays just like the communication a very important part. These parts also have a lot to common and affect each other in a large extent. One problem that may occur in many companies is the failure to grow and gain a larger share of the market even if they in various ways are trying. Expander is one of those companies and in this research report we studied communication and brand building, focusing on brand management, relationships and integrated marketing. Here we drew the conclusion that all these areas are important for a company, especially in the Business-to-Business marketing in different ways.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

Kommunikation på byggarbetsplatsen har en stor förbättringspotential enligtSvensk Byggtjänsts undersökning. Rapporten visar att stora besparingar kangöras i byggbranschen och särskilt hos entreprenadföretagen. Dettaexamensarbete beskriver hur kommunikationen sker på två av Skanskasbyggarbetsplatser i Uppsala. Det visade sig att majoriteten av de problem somuppstår i byggskedet kan härledas till en brist på tydlighet i kommunikationenpå byggarbetsplatsen. En litteraturstudie har utförts som grund till arbetet.

This essays main focus will be on emergency shelters in disasters, and their understanding in gender awareness, by focusing on the way gender is constructed and seen. This dissertation will examine documents from Australian Red Cross and IASC (Inter Agency Standing Committee) in order to explore how they work with gender and shelter related issues. The objective is to examine and with help from these documents see how gender is constructed. The method and theory is based on Carol Bacchis; What?s the problem represented to be approach? (WPR-approach).

Today, about 15 to 20 percent of Sweden?s total emission of carbon dioxide can be traced to the household sector. By examining apartment blocks in a life cycle perspective, the origin of the carbon dioxide emission has been charted and analyzed. This information has been used to create a computational model that calculates the total emission of carbon dioxide from a specific apartment block. The results from the analyzed apartment blocks indicate that both the use of energy and the emission of carbon dioxide have been reduced since the 1960s. Through the examination of building materials, it is possible to lower the emission of carbon dioxide that origins from the construction phase of an apartment block.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

Inledning: När företag genomgår rekryteringsprocesser så finns där flera olika strategier attanvända sig utav. Denna studie kommer att skapa en förståelse för rekryteringsstrategiernasom ett specifikt företag som uppger sig jobba enligt Talent Management använder sig av.Syfte: Syftet med denna undersökning är att skapa en förståelse för hur ett företag somuppger sig jobba med Talent Management utformar sin rekryteringsstrategi och därigenomkunna uppfylla ett kunskapstomrum angående rekryteringsstrategierna inomforskningsområdet Talent Management.Forskningsfrågor:Hur definieras talang vid rekrytering i ett företag som jobbar med Talent Management?Hur väljer företag vilka rekryteringsstrategier som är lämpliga?Vilka rekryteringsstrategier använder sig företaget utav?Metod: Denna studie har genomförts med en kvalitativ forskningsmetod som har innefattatsemistrukturerade intervjuer för materialinsamlingen. Intervjuerna och det empiriskamaterialet är insamlat från ett ledande företag inom sin branchen.Slutsats: Denna studie kunde påvisa att de centrala rekryteringsstrategierna i ett företag somuppger sig använda sig utav Talent Management är Head Hunting, Employer Branding,profilering samt talangpooler. Vi kunde även dra slutsatser att samtliga rekryteringsstrategiersom förekommer inom ett företag inte nödvändigtvis behöver tillhöra den rådande uttalademanagementstilen.