Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

During spring 2009 a three meter tall and laughing robot was developed in collaboration between Royal Institute of Technology and Royal University College of Fine Arts. The robots function and esthetics is based on an existing toy robot called Elmo. Elmo is 30 cm tall but now the goal was to make it 1000 times bigger in order to present it on the spring exhibition of Royal University College of Fine Arts. Due to only four months of developing and building time a demand of fast determination and good planning was required. In order to make a good structure for the project it is divided into five phases: Analysis of Elmo, planning, concept development, detail construction and finally product development and testing.In the first phase valuable knowledge is obtained according to the movements and geometry of Elmo.

A growing issue in the construction industry is how production can become moreefficient by using logistical solutions. Companies can minimize the cost of a project byreducing the time to perform the work.The purpose of this report was to examine the logistics related to pipe trenches forSIAAB. The report's focus has been on solving problems and planning that wouldfacilitate the work of the project Vaksala-Lunda Etapp 3.The case study consists of interviews with SIAAB's employees and an observationwhere the progress of a traditional pipe trench has been documented using checklists.Questions to the report?s case study come from the theoretical part, which is basedon literature on construction management and logistics in general. The observationlasted five weeks and the biggest time-consuming events that affected the pipe trenchduring this time, has received most attention.

This thesis aims to spread some light over the phenomena of gender construction in the upper secondary school. The background of this thesis is the gender gap in education. Girls are more successful in school and receive better grades than boys. The explanation that is given for this is that pupils are limited by far to rigid gender roles (DEJA 2010). The question is how these gender roles ? and specifically masculinity ? are constructed.

The Latvian building company Laval un Partneri Ltd (Laval) posted Latvian construction workers at the rebuilding of a school in Vaxholm in autumn 2004. Because the company refused to sign a collective agreement with Svenska Byggnadsarbetareförbundet (Byggnads), which is the Swedish trade union for constructions workers, Byggnads put the construction site under a boycott. Next Laval sued Byggnads for damages in the Swedish Labour Court (AD) because Laval considers the boycott as well as Byggnad´s demand that Laval signs a collective agreement incompatible with EC Law. AD has now demanded a preliminary ruling from the European Court of Justice (ECJ). While waiting for the preliminary ruling from the ECJ, several important questions of principle stand unanswered.

Projektet bestod i att utveckla en anläggning för personsanering av biologiska-, kemiska- och nukleära stridsmedel, en så kallad NBCanläggning. Arbetet har initierats av Marinens Sjösäkerhetsskola i Karlskrona. Under arbetets gång har Fredy Olssons produktutvecklingsmodell tillämpats. Projektets tyngdpunkt har legat i att söka komponentalternativ för de önskade ändamålen och för att uppfylla kraven. Anläggningen är långt ifrån produktionsklar, men ett omfattande grundarbete har gjorts inför ytterligare bearbetning och komplettering med beräkningar samt vissa komponentval..

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.

Title: Kvarteret Tvättstugan, an apartment building with massive wood construction. A thesis about acoustic and fire requirements and a comparison of energy and moisture aspects. Earlier restrictions in the Swedish legislation have resulted that only a small percentage of the apartment buildings that have been built are designed with a massive wood construction. It has been allowed to build unrestricted with wood since 1994 as long as the function of requirements are fulfilled. This change in the rules together with the great environmental benefits of wood has led to that more companies choose to build apartment buildings with wood. One of these companies is Folkhem Production AB.

Purpose of the thesis is to construct a tool for car wheel change. Car wheels can be heavy and hard to handle and therefore the company Movomech intends to develop a tool that makes wheel change easier. Movomech does not have any similar product and because of this the work was condition less.The intended users of the product is tire workshops and there for the work began with investigation of these. The reason of the investigation was to see how wheel change is done and how tire workshops are planed. The tire workshops? crew?s opinions were also considered and above all one important conclusion was made.

This qualitative study is focused on the way ?papperslösa? (undocumented/illegal/irregular immigrants) are portrayed in Swedish daily newspapers, what images are presented in the articles, what discourses permeate the text, what identities are being constructed, etc. The empirical data consists of thirteen articles published in Dagens Nyheter and Svenska Dagbladet (two of the biggest daily news papers in Sweden) during the period 2010-10-01 ? 2011-04-01, and I?ve used a type of discourse analysis called ?diskursanalys med inriktning på identitetskonstruktion? (?discourse analysis with focus on identity construction?), as the method to analyze the articles. The results of the analysis showed that four discourses and identities were constructed, re-produced and upheld in these articles.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Bebyggelseantikvariskt program15 hpInstitutionen för kulturvårdGöteborgs universitet2013:20.

The aim of this master?s thesis is to analyse the construction of European identity in three ofcontemporary EU initiated projects for the digitisation of collections from museums, archives, andlibraries. The source material consists of the web pages of the projects Minerva, MICHAEL, andEuropeana, as well as some other policy documents on digitisation and access from EU authorities.Theories on nationalism and construction of heritage are used as an overall context to the problem.After a brief description of the mentioned projects, the author undertakes an analysis of theways that the concept of ?European heritage? is depicted in the source material. The result is thefollowing: normally, the true European heritage is considered being united even though it isdiveded culturally, historically and linguistically.

Sammanfattning? ett förslag till levande centrum Mariastaden.Detta examensarbete utfördes för att undersöka möjligheterna till att skapa ett centrum/mötesplats i Mariastaden, Helsingborg. Arbetet skall även ge förslag till hur ett eventuellt centrum/mötesplats skall utformas.Mariastaden är ett gammalt sjukhusområde strax utanför Helsingborgs centrum. Detta område avvecklades som sjukhusområde så sent som början av 1990-talet. Nu har de gamla sjukhusbyggnaderna och personalbostäderna renoverats och byggnaderna har fått nya användningsområden.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.