The Swedish energy company Vattenfall is currently the owner of the district heatingsystems in Nyköping and Motala. To be able to also offer cooling solutions tocustomers are becoming more and more important. This report describes the resultsof an investigation of the cooling market in the two cities and the potential needs forcooling today and in the coming 20 years. The total potential for the coming 20 yearsis estimated to be roughly 17 MW for Nyköping and 9 MW for Motala.Two possible district cooling systems for each of the two city centers was modeledand a comparison was made between different cooling techniques namely absorptionand compressor chillers.Absorption chillers driven with district heating during the summer is one way ofincreasing the load in a combined heat and power plant and thereby the possibleelectricity generation. The cost of heat production must be low for absorption chillerto be able to compete as an alternative.

Large areas have been ditched in Sweden during the past 100 years to improve the forest production. Ditching and also maintenance of old ditches are operations having mainly negative effects on water quality, flora and fauna and changing characteristics of soil. The purpose of this study was to suggest a method for inventory of the need for ditching maintenance in old forest ditches that takes biodiversity, water protection and forest production into consideration. Inventory methods from five Swedish and Finnish forest companies, agencies and organisations were compared. Their employees were interviewed about their handling with ditches, forest production and nature conservation.

In this project a simulator has been developed (in C++) with the purpose of illustrating how changes in environmental regulations, tax levels and other policy measures affect the composition of an energy system. The aim of the project was to investigate how energy companies? investment strategies are affected when changes in economic and environmental conditions occur. A standard scenario has been created based on current Swedish conditions, but the user can create new scenarios and set parameters freely. The user is tasked with building power plants to supply the city/region with district heating and electricity during a pre-set number of years. When the simulation is finished the result is graded in the following categories: economy, environment and quality. To evaluate the simulator three scenarios were created (?early 20th century?, ?reduced environmental control? and ?future?) in addition to the standard scenario and these were compared with each other by examining how a select group of power plants perform under the given conditions.

The purpose of this work, has been to examine how different actors in the Swedish eco movement and the Swedish forest industry looks at Sweden?s forest policy statement, which claims that environmental goals and production goals should be equal in Swedish forestry. By assembling focusgroups with participants from the Swedish eco movement and the Swedish forest industry, we look at if these participants consider the Swedish forest policy goals equal or not. Conflicts do occur between the two forest policy goals, but also between those and others of Sweden?s environmental goals.

In this report listed buildings, according to the Swedish Heritage Conservation Act, have been studied with a focus on cases where economical compensation has been given to the owner of the building and cases where the listing of the building has been appealed by the owner. In order for a building to become listed it needs to be particularly valuable from a cultural and historical standpoint. The listed buildings are protected through a list of regulations that determines which parts of the building can or cannot be changed, what methods and materials should be used for changes and repairs, and how the building should be maintained. These regulations should as far as possible be formulated in agreement with the owner, but a building can become listed against the owners will. To decrease the damage this causes the owner he can in some cases have the right to economical compensation. There is also a possibility for the owner to appeal the listing of the building.

Energy-wise houses in Järinge - technical follow-up The company JM built energy-efficient houses in Tensta in Stockholm. They have built a total of 16 houses divided into two parts of A-houses and B-houses. The buildings are an attempt by JM to minimize energy-use of the buildings without affecting the comfort and living standards. The project aims to examine the data for the 16 houses on the basis of data and produce a report showing how the buildings worked through a technical perspective. JM approximates that the purchased energy will not be higher than 95 kWh/m2 per year.

The area of Lycksabäcken northwest of Lycksele is a national interest of natural conservationbecause of its geological values with many unique landforms. Many of these landforms indicatethat the deglaciation process in the area was very complex. However, the deglaciation process inthe area has not previously been fully understood. The aim is to add to the knowledge of theevents that took place during the last deglaciation. To do this, the glaciofluvial landforms in thearea were mapped by studying aerial photographs with a Wild Aviopreter and a five-day fieldinventory of key areas for the interpretation.

Värmekollektor in Sunne is a company whose main occupation is to collect the gas produced inlandfills. The gas contains about 50 % of Methane which is a greenhouse gas 20 times worse than CO2and should therefore not be allowed to leak into the atmosphere. The Methane is in as large amount aspossible used in different plants for example heating of households. But there are occasions when aflare is needed to burn the excess gas at standstills or testing of new landfills. The Flare only burns themethane to reduce the hazarder?s effect of the environment, it does not take advantage of the energy inthe gasThe goal of this master thesis was for me to create a foundation for an in-house production offlares for Värmekollektor.

The housing sector of today represents for almost 40% of the energy consumption, an energy consumption of which the major part consists of non-renewable energy sources. This is not sustainable and utilization of new energy-efficient technologies in buildings can be a step in the right direction, towards a sustainable energy society.This report has been made on behalf of and in cooperation with Älvstranden Utveckling AB in Gothenburg to examine how future energy-efficient technologies can affect the energy demand in energy-efficient multi-dwelling buildings.The report is based on Älvstrandens passive house, Hamnhuset, a house whose energy consumption is far below the BBR's requirements. The report looks at the opportunities for improvement within windows, insulation, solar energy technologies, as well as white goods. Computer simulations are then made to apply the selected technologies into a reference building. Technologies are selected from an energy efficient perspective and no account has been taken of other aspects such as the economy.

Nanotechnology, one of the most interesting sciences today will no doubt have an enourmous impact on tomorrow's society and industry. One of the most interesting nanomaterial that has been discovered is the semiconductor quantum dot (QD). This material shows interesting novel properties such as a size-dependent band gap, which is an effect caused by the quantum confinement effect in all three dimensions. Due to this phenomenon the absorption spectrum can be tuned to the desired value by adjusting the size of the QD.This thesis aims to investigate how the solvent ratio of H2O/Ethanol affects the optical and structural properties of copper sulfide QDs manufactured in a chemical synthesis way using modern microwave heating. The process of manufacturing QDs using chemical synthesis often involve a capping-agent to prevent the QDs from agglomerate into bigger structures.

The swedish national board of housing, Building and Planning,recommends that all stakeholders in the construction industryperform a moisture control design to make sure that the buildingachieves good moisture resistance. Since June 1, 2006 there are nospecific requirements or quantitative values for air leakage.Although the swedish national board of housing does presentrequirement that the building envelope must be sealed so that theclient?s requirements for specific energy consumption and installedelectric power for heating purposes are met. Despite this, studiesfrom SP shows that few buildings meet the client?s requirements inspecific energy, which increases the risk of occurrence ofcondensation-related moisture damage.This study aims to evaluate curtain walls connections from airsecurity and moisture safety.

Calesco Foil AB is a manufacturer of thin flexible circuits for heating or electric conduction.The plant is located in Kolbäck, Sweden.One of the company?s products, the conducting polymer pasta is in present situationunpredictable. Unpredictable in the way that the same type of heater shows differentresistance, depending on which time they have been produced. The desired repetitivelyprocess is almost non-existing.The aim of this master thesis is to primary identify those parameters that effects theresistance, observe and if possible to perform tests on them. The results from this analysisstand as base for recommendations to achieve a repetitive and standardized printing process.The results and the observations from the tests indicate that a repetitive process is possible toachieve.

This paper deals with the problems that can occur during the move of an entire collection. Thecollection discussed is located at the Gothenburg Maritime Museum and it has beenconsidered to move the collection to a storage where the other collections of the museum iskept. No decisions are taken but this is a suggestion of how it could be done. The collectionwhich is studied contains of different kinds of objects like for example paintings, work onpaper and photographs. The whole moving project is looked into and all the different parts areanalyzed.

This bachelor thesis discusses firefighting and the use of portable fireextinguishers in the salvageof historic artefacts focusing on textiles. It also looks into the use of multi-purpose dry chemicalextinguishers in a textile context and the impact the actual dry-agent has on textiles afterfirefighting.Literature studies, interviews and tests on different textiles were carried out to write this thesis.During the tests textiles were exposed to the dry agent and also to dry agent plus water toinvestigate the difference in residue. After vacuumcleaning it was clear that when the textile wasexposed to dry agent and water it was almost impossible to remove the chemical without rinsingin water.By examining the residue left on the textile using SEM it was possible to see if a textile was aswell decontaminated after vacuum-cleaning as it looks to the eye. We know that the dry agentoften consists of ammonium phosphate which acts corrosively on many materials and one canassume it damages textiles as well after longer exposure.Buildings housing cultural collections are vulnerable as we cannot easily replace ruined materialwith new.

The concept of large paintings includes panoramas, cycloramas and other paintings thatin size exceeds the normal magnitude of wall hung paintings. When these large paintingsare mounted in the ceiling, they are referred to as plafonds. When they are performedon canvas, certain kinds of structural distortions and stress occurs. In addition, becauseof their size and mounting high up in the ceiling, plafond paintings are often difficult tohandle, which leads to less or no maintenance. A plafond may therefore be left withoutattendance for many decades.This thesis has its focus on what happens with plafond paintings on canvas when they areexposed to gravitational forces, and the problems involved in restoring large paintingsmounted in the ceiling.