If you have access to wood, a wood burning boiler is a cheap way to heat your home, but it is certainly not the most convenient option. Wood requires many operations and management, which takes time. One way to reduce this workload is to have a modern boiler with automatic ignition. Enertech/CTC has a desire to create an accessory with automatic ignition to a modern wood burning boiler. Today there is no boiler on the market that can ignite firewood automatically without the introduction of paper and sticks.

The objective of this study was to contribute with suggestions of nature preservation managements of selected forest objects of high nature values managed by the Swedish state-owned forest company Sveaskog. Many forests with high natural potential are relatively rare today due to modern forestry, where wood production is the main purpose. Sveaskog?s policy is to consider and to priority nature conservation on valuable objects. This assessment includes objects that in the future may develop into nature reserves.

Everyone has to take a greater responsibility in energy issues, both individuals and companies. There have been some major developments in the construction industry but there is still a lot to be done. This diploma work thesis presents different methods of making existing construction shed establishments to use less energy. What is possible to do and how much energy is there to be saved? A shed establishment consisting of 8 shed units were studied in this project and the building simulation tool VIP-Energy was used to simulate different types of material in the sheds. An infrared camera was used to locate thermal bridges. There are several factors that can be improved to make a construction shed establishment to use less energy.

This thesis is about a part of the marquetrytechnique, scorching. Scorching is made by heating up something, put a veneer into the heated substance and make a controlled burning. This technique is old but still used today and have according to me great potential for development. In my work I wanted to give the scorching greater room then I earlier have seen. I wanted the scorching to be the dominant ingredient for a decorative element in a piece of furniture or an interior.

Microwave is a time- efficient device for heating and reheating of foods. Despite the fact that its effects on foods have been evaluated during a long period of time, without any more negative effects shown compared to conventional cooking, one third of the Swedish population believes (in 2010) it accounts for a higher loss of nutrition. This literature review aim to compile studies regarding how food is affected by cooking in microwave, with respect to cooking losses, nutrition, secondary metabolites as well as sensory and textural aspects and compare it with conventional cooking. The compilation shows that different combination of effect (W), time and amount of water during microwave cooking have different effects on foods. The contents of proteins, vitamin B and carbohydrates are generally higher after microwave cooking, while anti-nutritional substances are affected much less during conventional cooking. This also depends on if it is of animal or non-animal origin. However, for the majority of nutrition values the differences are quite small.

Microwave is a time- efficient device for heating and reheating of foods. Despite the fact that its effects on foods have been evaluated during a long period of time, without any more negative effects shown compared to conventional cooking, one third of the Swedish population believes (in 2010) it accounts for a higher loss of nutrition. This literature review aim to compile studies regarding how food is affected by cooking in microwave, with respect to cooking losses, nutrition, secondary metabolites as well as sensory and textural aspects and compare it with conventional cooking. The compilation shows that different combination of effect (W), time and amount of water during microwave cooking have different effects on foods. The contents of proteins, vitamin B and carbohydrates are generally higher after microwave cooking, while anti-nutritional substances are affected much less during conventional cooking. This also depends on if it is of animal or non-animal origin. However, for the majority of nutrition values the differences are quite small.

This thesis provides a good introduction to the American environmental certification system LEED, Leadership in Energy and Environmental Design, and trough compar-isons between Sweden and the United States an explanation to the systems design is given. The work is closely linked to a LEED Core & Shell project in Stockholm, Swe-den, where the goal is to reach the second highest rating in LEED - Gold.This thesis gives a broad description of the LEED system and a more profound study of the energy sector, Energy and Atmosphere. Here, for example, an analysis has been made of how the energy consumption of an imaginary building designed according to the requirements of the BBR (Swedish building code) performs in comparison to the Baseline building in LEED.The existing model of Borgarfjord 3, which served as a case study in this work, has al-so been modified to investigate the energy savings that could have been achieved by adding extra insulation to the building. A description of the problems, regarding how the Swedish district heating system (DES) is treated in LEED, is given as well as the suggested modifications. This is an issue that will be pursued during the process of shaping a new, international, version of LEED due to be launched 2012..

The aim of this study was to describe preferences of geographic direction of ten, oak-living epiphytic lichen species and how they responded to sun exposure, nearby bushes and trees, bark fissure depth and circumference. The frequency of every species was recorded in arcs of ten degrees around the tree at a height of 130 to 180 cm above the ground. An estimation of the amount of every species in every arc was also recorded. To analyse how the distribution of the lichen species responded to the different factors their concentration for every tree was plotted against the four factors. The distribution of Cliostomum corrugatum had a positive response to high sun exposure and a negative response to a thick layer of bushes and trees.

When I began my studies at Gammelkroppa forest school I started to think about an appropriate thesis. There was much discussion about the wild grazing damage during that period. I was at that time a part of Boo property and helped at their great hunts. They had the dual uses of wildlife and forest. I decided that I want to study how big the wild grazing damages are and if we can reduce them.

The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

This thesis is a case-study of an ongoing court case between the Swedish Competition Agency and Växjö Municipality about a set-up requirement to the long-distance heating system for newly built private houses on municipality owned land. This requirement was set up as part of the municipality?s long-term environmental goals; however the Competition Agency claims that the demand is damaging the free market in the municipality. The purpose of this thesis is to determine which normative assumptions the decision makers have based their actions and re-action on, and whether or not these assumptions are valid, thru theoretical ideal types. This is determined via method of textual analysis.

The aim of this study is to find a method to incorporate the energydemand of a building in the investment cost estimate.The study is based on an actual apartment block. The significant energyaspects are identified, and changed to more energy efficient options.These are then simulated using the energy calculation program VIP+.The calculated energy need is used in the investment cost estimate, andthe simulated alternatives are compared in regards to their economicalprofitability.Depending on the focus, different alternatives are the most advantageous.Since this study aims to show which alternative is the mosteconomically profitable, the annual profit is the parameter of mostimportance. This means that individual measuring of heating and hotwater use is the recommended change of the original house. A changeof the windows to new ones with a U-value of 1,0 as well as 0,8W/m2K also results in a positive change of the annual profit comparedto the original house..

Freshwater ecosystems have long been neglected as an important part of the global carbon cycle. However, research shows that most of the world?s lakes are net-heterotrophic and consequently emitters of greenhouse gases to the atmosphere. In many boreal and north-temperate lakes, most of the yearly emissions usually occur in spring, shortly after ice-thaw. The aim of this study was to quantify the flux of carbon dioxide (CO2) and methane (CH4) in three boreal lakes, during this annual event.

The purpose of this study was to investigate women's experiences of pain, bleeding,to discover the fetus, hospitalization associated with medical abortion at home and toexplore differences in experiences between different groups of women, as age orprevious childbirth. The study was conducted at two gynecological clinics in Uppsalaand in Stockholm. A questionnaire was distributed and analyzed using a quantitativeanalysis method. The response rate was 30 %. Most women were satisfied with thepain relief given to them from the hospital.

The aim of this bachelor thesis has been to investigate some of the materials present in and onprinted papers which might be suitable for analysis. A brief history of paper making and somepigments were studied after which the theory of some of the available methods for technicalanalysis were summarized. Two works of art on paper were chosen for a closer examination,both are woodblock prints but of different composition and origin. The investigation wasmade to exemplify some of the common techniques applied on works of art. There were twoaims in these examinations.