During the last decennium climate issues have become more and more important. Many steps towards an adaption of efficient energy supply systems have been taken all around the world. These steps have been created to ensure the next generation?s energy demand. In EU and Sweden objectives have been set to ensure that the energy consumption decreases by 20% year 2020 and by 50% year 2050 compared with the energy consumption levels of year 1995.

The aim of this report is to give a concise description of curtain walls, what it is and why they are used. It is also a description of six different but commonly used design technologies. By giving a detailed description of the different types and there special properties, the pros and cons will be clarified. The three most interesting alternatives were selected to be included in a test, to show the best alternative from a certain point of view.The parameters are:? Environment? Cost? Ergonomics? Isolation against noise and fire? DurabilityThese are important parameters in the planning and design phase.

After I heard that two deadly accidents in farming 2003 were created by work with cattle, I got the idea of writing this degree project. So far there are not too many reports written about safety for the worker nor the animal. Therefore it will fit in with a report about safe handling of free stalled cattle. The Swedish Board of Agriculture would also like to do an information material about outside stalled cattle with this degree project as a background. The collecting of material was made by visiting farmers. The goal was to visit 15 ? 20 herds and when this is being written 19 herds have been visited.

This report deals with issues related to construction waste. Building material that has not been built into the project is defined as construction waste. Cost of construction waste amounts to 4-12 % of the total cost of the project. Moreover, cost of construction waste is 1-3 % of the production cost. The aim of this study is to increase knowledge about the main causes of waste within the construction industry.

The Results of this thesis was the creation of two designed house variants with a module toall the apartments. In addition till the first module there are three other modules ofapartments that can be put in the houses if it so needs. The house are volume prefabricatedand are placed on site in a way that it create an enclosure of the area which faces against thenature and car parks also lies hidden behind these houses.For the actual structure, a cross beam was created to carry the floor above and it is supportby all four walls. The structure between the first and the second floor has no "syll" butinstead there are two differently alternative to linking the floors in order so that it will notmove. The reason with this solution was that there will not be any subsidence when theforces from above are pressed down ward.

Sweden has formulated ambitious energy goals which signify that by year 2050 the energy usage should be halved. One of the objectives is the reduction of energy usage by 20% by year 2020 and that it should be compared to the usage of energy from 1995. In parallel with increased energy requirements for buildings the demand on housing conservation, by highlighting also buildings from the last 50 years as part of the building heritage, continues to enhance, which in theory means that there is a conflict between these.The law will never be able to point out unique buildings and PBL (planning and building act) is not especially concrete. The National Housing Board has tried to make this more concrete by the new BBR regulations though there are still an enormous variety of interpretations.This report deals with the conflict between conservation requirements and additional insulation of the building envelope and is limited to multi-residential buildings built between the years 1945 and 1975. It is the stock with the greatest energy consumption and that is where the big challenge lies.

The study took place at a food corporation in Växjö, Sweden. It describes a building that contains four tanks in which glucose syrup is stored. The purpose of the study was to calculate the amount of heat that leaves the building and the amount of heat that is supplied by the installed heating equipment. Before the calculations could be implemented, all the systems that supply the building with heat had to be examined. With a small amount of information from earlier studies, the work to gather all the data necessary for the calculations began.

Det råder bostadsbrist i Stockholm, en lösning är att bygga nya bostäder. En annan lösning är att nyttja befintliga byggnader som inte används som bostäder, genom att bygga om kontor- och industrilokaler till bostäder. Det som händer är att industriområden flyttas längre ut från de attraktiva bostadsområdena. Ombyggnationer av byggnader med olika lokalkategorier kräver omfattande bearbetning och samarbete mellan flera aktörer såsom stadsplanerare, byggherrar, arkitekter, konstruktörer med flera. Det finns många aspekter att ta hänsyn till vid ombyggnationsprojekt och vårt mål är att belysa några av dessa.Den här rapporten studerar först och främst konstruktörens roll, vad en konstruktör ska tänka på vid en ombyggnation.

Concrete floors have traditionally had no problems with annoying vibrations. However with the demand for larger spans the floors need to be made more slender with a higher degree of utilization and lower mass. Therefore new floors may have problems with vibration serviceability. This thesis studies the vibration characteristics of hollow core slabs. The analysis was made in the finite element program Ansys. The hollow core slab was subjected to a varying force simulating one person walking across the slab.

Stenebergs sockerbruk is a large log-timber construction, purpose built as a sugar refinery in 1739 and is one of Sweden's oldest industrial buildings constructed entirely out of wood. Despite receiving the status of a listed building (in Swedish: Byggnadsminne) in 1977, there exists today a surprisingly low amount of documentation of the building itself. In order to enhance the existing and lacking building documentation, this case study aims to shed light on the building's log-timber built frame, focusing on how it was constructed, how the long lengths of its walls were handled and what type of joinery and tools were used. A thorough investigation of the building is conducted on site, followed by gathering of information which is then presented through text and illustrations. The findings indicate the orientation of timbers, location of joints and scarfs as well as tool marks which together contribute to the forming of a basis of understanding of the building's construction..

This essay concerns graffiti, and in particular graffiti removal regarded as iconoclasm.Graffiti is described as a visual symbol laden with both negative and positive values, and sometimes as a meaningful expression in the urban public space. One problem with graffiti as a field of study is the diversity of both the meaning of the term as well as the diversity of the phenomenon itself. Therefore I have defined the term graffiti as follows: words and images painted on public walls by a person usually in an unauthorised manner. Specific examples of graffiti and related phenomena are presented. Within the Swedish anti-graffiti discourse the pejorative term klotter (scribbling) is used to describe what I above define as graffiti.

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

The aim of this essay is to examine the relationship between picture and room, between wallpainting and architecture. The basis for such exploration is the mural painting in Sweden at the turn of the 20th century, and the artist in focus is Prince Eugen (1865-1947).His works "Sommar"(1904), "Rimfrosr"(1909) & "Staden vid vattnet"(1922) and the rooms in which they are in make for an anlysis concerning how the totality of the space is experienced by the viewer.The main issue in mentioned expeience is how the mural is perceived with regard to the other elements in the room. And here, the walls' "flatness" enhancing its decorative qualities plays in. The problem with a mural built on the principles of perspective becomes evident when a wall is seen to vanish through the painting of an illusion on it..

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.