The aim of this thesis is to study the private owner structure in the Swedish forestry. This will be done with both a investigation of forest owners in Småland the year 2000 and 2001 and also a statistic research for the private forest owners in Sweden right now and over the years. In Sweden more than half of the total forest area is owned by private forest owner, witch is approximately 22 600 000 ha. Private forestry includes the owner categories private person, ordinary partnership and the estate of deceased persons. The main part of the private forestry is to be found in Norrland but also in the rest of Sweden private forestry constitute a large part of the forestry area.

The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

In this thesis we propose a conceptual plan for thedevelopment of an Agroforestry Training Centre (ATC)in Musoma, Tanzania. The aim is to make a proposalto support peasant education in agroforestry. How canan ATC in Musoma be developed into a stimulatingand educational park suitable for teaching agroforestrymethods to peasant farmers and other potential users?To answer that a field study was conducted to investigatehow our client Vi Agroforestry Programme (Vi) and thetarget groups of the client can benefit from the site.The thesis begins with a short explanation of thecontext, in which the ATC plays a part followed by amethodology chapter. Next are three chapters presentedwhich introduce the reader to the research conductedbefore starting the proposal, these include: results ofliterature studies, study of precedents, and results of fieldstudy.

The music distribution in Sweden and the world is rapidly changing. The music industry, however, has been reluctant to change the way they distribute music. The consequence has been that illegal music files have been available for downloading to anyone with an Internet connection. Because of the illegal downloading a new law have been implemented in an attempt to stop this behaviour. Our theory is that in implementing the IPRED-law, the sites that were hosting most of the illegal material will experience a severe decrease in traffic.

Hedemora is the oldest town in Dalarna; traditionally acting as an important junction for trade. Nowadays, the town is suffering from a declining population and a poor economy. Therefore, it is important to explore how to best spend the money needed for Hedemora to become an attractive city once again. "Sociotops" are public spaces that have been evaluated by their users and by city planners, both working together. The result in the sociotop investigation will be used as a basis for city planning and as a foundation for discussing how to make the town a nicer environment. The sociotop investigation attempts to answer the questions: What places are popular and why? And What places are disliked? I approached the questions by using questionnaires, by arranging public walks in the city and by holding group interviews with children, along with my own observations. The information I have gathered is most detailed for children and youth between the ages of seven and twenty years old.

Breakdowns of welded structures are usually a consequence of fatigue loading. Fatigue fractures are commonly initiated in the region close to the weld toe but can also initiate from the weld root and from discontinuities inside the weld. The purpose of this investigation was to examine the weld quality of welded joints produced at Volvo Wheel Loaders factory in Arvika. The goal of the investigation is to give a clearer insight regarding factors influencing the fatigue strength of the welded joints and thereby give a better foundation for fatigue strength calculations.The investigation is including examination of the weld geometry, weld discontinuities and the effects of shot peening. Mainly three different methods for collecting test data have been used: Plastic replicas cast on the weld profile, weld specimens from a rear frame belonging to a wheel loader of model L110E/120E and Almen testing of the shot peening.The results showed that it is not possible to control even transition between the weld material and the base material without after treatment.

Modern technology and fast development of heat pumps, the hunt for savings in energy consumption and the strive for environmentally friendly energy sources, convenience, and financial profit, have made heat pumps a reasonable alternative for the heating of houses.When the heat pump starts it will consume a considerable amount of current, which may result in a short-lived voltage-drop if the power grid is weak compared to the start-up current.The company Fortum Distribution which owns and administrates electrical network is interested in an investigation that deals with heat pumps affect on the quality of electricity.The purpose of this investigation is to study fast electrical fluctuations (flicker) as a result of start-up currents for single as well as multiple heat pumps on the same electrical station and from this evaluate whether there will be any problems installing heat pumps..

This essay is about how islam is illustrated in textbooks of History in Sweden during 1980-s and first decade in 2000.  This study does not aim to give all answers about those tendencies, but it will lift up and discuss this issues.The essay has two questions to answers. They are:1-      How does textbooks from 1980-s and 2000-s illustrate Islam?2-      Do we see any tendencies of Orientalism in textbooks?The most focus in this study will be in first question, because this question is more open and need more empirical material to answer. The second question is more specific and has to do with first questions results. The first part of off essays investigation has to do with description of what textbooks writtes about Islam. After this I will compare and analyze what differences they are between textbooks from 1980-s and first decade of 2000-s.

I have chosen in my study, to do a comparison between pupils´ expectations of the future, how they would meet adult life or working life after their education. These pupils are ending their programmes during this term. One program is Business and Administration Programme and the other programme is Qualified Vocational Education in Business, which is a post-secondary education and training programme. This investigation is done in Haninge municipality.The purpose of this study has been to investigate if these students´ expectations differ between each other, compared with factors such as age, sex, ethnical origin and different study programmes. Further it has been interested to see how teachers and future employer meet these pupils´ expectations in education or in their planning working life.There have been two other important questions to investigate in this study.

This thesis examines the sheep shed called Ronningsgift, and its historical functions and geographical location. The study aims to make a comprehensive gathering of the existing knowledge and to shed light on new theories about the history of Ronningsgift. This is done through desk research including literature and archive search, as well as an investigation and description of the construction and materials, and an interview. Further, I got the opportunity to take part of the results of two C14 samples from Ronningsgift. The literature and archive search shows that the most common theory of the historical function is as a guest house (g?ststuga/h?gstuga) or more traditionally called, Malst?ue/Malsteuvu.

BAE Systems Hägglunds has a long history of producing high performance terrain tracked vehicles (mostly for military applications), and they are now aiming at developing a tracked forwarder with similar techniques.The forwarder will be of series hybrid type where a diesel engine via a generator will power the motors (one for each drive wheel). Thanks to individually controlled motors and the gentle rubber tracks, this forwarder is calculated to have a considerably higher average speed in the terrain and to be more gentle to the soil. The forwarder with a weight of 11 metric tons and a load capacity of 15 metric tons is specified to have an average working speed of 7-10 km/h, a top speed in terrain of 15 km/h and a top speed on roads of 40 km/h.This master?s thesis aims at developing a conceptual design of the forwarder?s drive module which includes electric motor, gear unit, brake and drive wheel.To investigate if the requirements can be fulfilled a study of the dimensioning loading scenarios has been carried out. The resulting needs regarding the torque has been considered in order to determine the required gear ratios for different motor options.

Denna rapport är en del av mitt examensarbeteinom landskapsarkitekturprogrammet vid SLU Alnarp. I arbetet ingår att gestalta två idéträdgårdaroch att realisera en utav dem. I denna rapport presenteras de båda gestaltningsförslagen i text ochbild samt en rent dokumenterande beskrivning avdet praktiskt utförda arbetet med anläggningenoch uppförandet av den ena idéträdgården. I slutetav rapporten diskuteras fenomenet konceptuellaträdgårdar samt idéträdgården som en inspirationskälla och hur denna kan fungera. En utvärderingav skillnaden mellan temporär och permanentidéträdgård behandlas också..

It?s been noted that cows held at the section of ruminant medicine and epidemiology, Swedish University of Agricultural Sciences (IME), used for the education of veterinary students, have a lower heart rate than what is considered normal for ruminants. In this investigation the heart rates of seven lactating cows were recorded continuously during the period around drying off. The first recording took place at the farm from where the cows were bought, and then their heart rate was monitored after their arrival at IME and further on until they were completely dried off. The results were then compared to the heart rate of seven already dried off cows from the same farm.