Gotland is famous around the world for its unique nature. The agriculture here has always been an important source of income and part of the identity of the island. But today the profession has low status and hard to survive. How can the interest for farming be increased?Gotlandsgården is an investigation about how the agriculture could develop.

This essay is about how islam is illustrated in textbooks of History in Sweden during 1980-s and first decade in 2000.  This study does not aim to give all answers about those tendencies, but it will lift up and discuss this issues.The essay has two questions to answers. They are:1-      How does textbooks from 1980-s and 2000-s illustrate Islam?2-      Do we see any tendencies of Orientalism in textbooks?The most focus in this study will be in first question, because this question is more open and need more empirical material to answer. The second question is more specific and has to do with first questions results. The first part of off essays investigation has to do with description of what textbooks writtes about Islam. After this I will compare and analyze what differences they are between textbooks from 1980-s and first decade of 2000-s.

The aim of this investigation is to explain present and historical differences in the Swedish and Danish unemployment rates between 1976 and 2005 with a broad framework, making use of neoclassical and post-keynesian economic theory. The influence of the rate of investment to GDP, and various institutional factors are assessed in quantitative analysis. It is suggested that the crude answer of the question asked in the title, ?What is it that Denmark does that Sweden does not??, is that Denmark invests. This investigation suggests accordingly that the main reason of the relative labour market success during the 90?s in Denmark was a rising, and rapidly recovering, rate of investment to GDP, and perhaps not primarily its flexible labour market institutions.

This thesis describes a conceptual design of a support frame for a synchronousgenerator used in a vertical axis wind power plant. In this system the generator isplaced on ground level. The thesis also considers the design of housing for thesupport frame and generator. The concept presented in this report is based on anearlier design. Besides geometric design, simplified simulations has been run in orderto optimize some of the parts included in the construction considering naturalfrequencies and structural strength.The result is presented as CAD-models andan assembly drawing..

The ability to fight is, according to Swedish Armed Forces Doctrine (MilitärstrategiskDoktrin), depending upon the physical component, the conceptual component and themoral component.The purpose of this thesis is to examine in what way the Swedish doctrine is based onthe theories on war and war fighting by Sun Zi, Carl von Clausewitz, Antoine Henri deJomini and Mao Tse-tung.I have found that the Swedish doctrine is based on those theories.However, the Swedish doctrine needs to be developed in order to better explain therelation between the three components..

Thanks to I have got to explore different teaching ways around the problem solving in a year 3, in a multicultural school which is located south of Stockholm, I have been able to answer my question at issue in my degree work. My question at issue on this investigation and the purpose with my degree work was to explore different teaching ways that promotes pupils with another mother tongue than Swedish, to develop reading comprehension and to get a better understanding of mathematical concepts in problem solving tasks. On this investigation have I chosen to teach these pupils to explore, reach and gain a deeper understanding of what teaching about problem solving promotes these pupils. I have when it concerns choice of method and material collections assumed from a qualitative investigation and gathered the material with help from participation notices and interviews. I have in my investigation reached the conclusion that those pupils with another mother tongue than Swedish developed reading comprehension and got a better understanding of mathematical concepts in problem solving tasks by being taught in a creative and varied teaching. A creative and varied teaching as I taught those pupils in contained:the pupils had to work with living-related problem tasksthe pupils had to work in pairs to resolve problem solvingthe pupils had to work in larger groups to resolve problem solvingthe pupils had to work in a creative way, by writing and drawing pictures and do their own mathematical fairy tale in problem solvingthe pupils had to work with manipulatives to resolve problem solving in half classes..

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

Quality assurance for Scania engine componentsScania engines have become one of the world?s most renowned corporations in themanufacturing of engines. This is mostly due to the quality and performance thatScania have shown. However, this does not stop Scania from trying to achieve moresuccess in the fields of development and research to assure the quality of theirengines.The purpose of this thesis is to show how Scania ensures the quality of the enginecomponents, both those who made externally and internally at Scania, also inclusivethe manufacturing and assembly process.Three engine components were examined: D16 block engines, water pump andXP-Iinjectors. The study included the whole process from the step of supplying therow materials to the last step in production functional test.In this thesis an investigation of how other companies are working with qualityassurance was conducted.

During my education I have frequently noticed that pupils do not like science or find it hard and dull. The purpose with this investigation is to find out how pupils experience their science education and if they can understand the arguments for studying the subject at school.I have made a questionnaire study among pupils in grade 8 and 9. After analyzing their answers I have interviewed some of the pupils to get answers on further questions.The investigation resulted in conclusion that pupils have hard to connect their science-education to their everyday lives. The most important element in forming the pupil?s opinions about science is their relation to the teacher and how the lessons are set-up.The following questions will be answered in this paper:Do pupils understand why they have science at school?Can the pupils see the use of scientific knowledge in their everyday life?How do pupils look upon their science education?.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

The music distribution in Sweden and the world is rapidly changing. The music industry, however, has been reluctant to change the way they distribute music. The consequence has been that illegal music files have been available for downloading to anyone with an Internet connection. Because of the illegal downloading a new law have been implemented in an attempt to stop this behaviour. Our theory is that in implementing the IPRED-law, the sites that were hosting most of the illegal material will experience a severe decrease in traffic.

This study is about assessment, in particular formative assessment also called assessment for learning. The purpose of this study is to investigate Swedish and South African primary school teachers? views and ideas about this didactic tool. The motives for this investigation are based on the fact that correct used formative assessment supports pupils? learning process and the fact that there are few researches made about this subject in Sweden.

Introduction: A complex interaction between muscles, tendons, bones, joints and nerves are required for optimal function of the human hand. It is known that an individual?s grip strength is vital for performance of physical demanding tasks such as strength training with free weights. Strength training including a thicker grip around the bar may enhance the strength of the grip in the athlete without other special routines for grip strength development. The purpose of this investigation was to examine the difference in performance in multiple repetitions in two strength training exercises using two different sizes on the bar, to look for correlations between grip strength of the subjects hand and the amount of repetitions executed with two different size of the bar and finally the correlation of hand size and the amount of repetitions executed with two different size of the bar.Method: 15 strength training men (23,9 ± 4,1 years), underwent measurements of hand size, maximum grip strength, 1 repetition maximum (1RM), a 80 % of 1RM weight strength test with two different  bar sizes.Results: The results from the present investigation indicates a 21,1 % reduction of 80 % of 1 RM weight performance in repetitions executed in the bench press with the thicker diameter of the bar and a 66,2 % reduction in repetitions executed with a 80 % of 1 RM weight in the lying bench row with the thicker diameter of the bar.