This Master Thesis has been carried out in cooperation with Ursus Medical AB (URSUS) which markets, assembles and sells the Rotex Screw Needle Biopsy Instrument ®. The instrument is delivered with an instrument holder. Customers had expressed dissatisfaction over that they needed to use two hands during a biopsy procedure, which resulted in a project to develop a new instrument holder.The project aim was to create concepts for how the new instrument holder should be designed, with focus on the mechanics. The new instrument holder would build on the existing basic principle that the screw needle and the cannula were screwed into the tissue. The thesis work would result in a technical solution and a functional prototype of the chosen concept.To achieve this, a generic product development processes were used and began with a comprehensive literature review.

This Master Thesis describes how a concept for a new fly fishing reel has been developed. Thethesis has been an interwork with Loop Tackle Design, which is a leading company in the flyfishing industry with their high-quality products. Loop designs and develops all types of flyfishing equipment like fly fishing reels, rods, lines and clothes.The purpose of this thesis is to generate a concept for a new type of fly fishing reel. The new flyfishing reel shall be innovative and reduce the number of components in fly fishing equipment.The solution for this is to create a fly fishing reel that is collapsible and can be used for all typesof fly fishing.The thesis started with a history of fly fishing and the equipments that have been used for flyfishing in the past and what is used today, in order to get an idea how fly fishing haveprogressed. A frame of reference was then compiled to get an idea of the forces and surroundingsa fly fishing reel will be exposed to.

The process of producing a video game is one that goes through a number of phasesduring the span of the entire production. One of these phases is the concept design phase,which is part of the pre-production. This phase is an important aspect of the productionas it is where all the different parts and ideas concerning the game are brought togetherto define what the game is going to be. Though a clearly important part of the videogame production surprisingly little research have been done on the subject of conceptdesign. This thesis presents what place concept design has in the overall game productionand how the design process is handled.

This degree project is on 15 university points which correspond to 10 weeks full time studies. The work has been carried out during autumn term 2007 and spring term 2008. This degree project has been carried out with the cooperation of Etac Supply Center AB who is located in Anderstorp.It?s been Etac interest to develop a solution which helps the user of the wheelchair over obstacles. My task has been to develop a concept that solves the problem according to the requirement specification.In the rapport the reader can follow the development from an idea to a finished concept.

This report covers the thesis done by mechanical engineering at the engineering program at the University of Halmstad. Student Work Development of packaging in the food industry includes 15 credits and has performed over 20 weeks in spring 2009. The thesis work is a compulsory part of education and aimed at the student must apply the knowledge it has given during training in a project related to reality. Student work has been carried out in cooperation with Hanson & Möhringen AB and the project's main objective was to develop an environmentally friendly packaging to their brand Falk Salt. When salt is one of the world's cheapest commodity was packing all the costs have to be as low as possible.

A protection helmet for young people (3-7 years) in winter environment has been developed in this thesis. The result is a concept proposal for development at STIGA Sports AB in Eskilstuna. This thesis work has been performed during 20 weeks, for a Master of Science in Product and Process development at Mälardalen University Eskilstuna Sweden in September 2009 to January 2010. The helmet is shown as a CAD model with detailed solutions to the outer shell, interior and adjustability (in sizes 50-56 cm) which are the three focused areas in the development. Also a physical model in scale 1:1 has been developed and is shown in this thesis work.To achieve the best result possible the process started with an analysis of the market and the product.

This report describes the results of the project "Concept development of jet engine inspection plugs" carried out in the spring of 2008. The work was done at the department of product definition at the company Volvo Aero in Trollhättan. The objective of the work was to develop concepts for a "Volvo-unique" inspection plug. The work is part of Volvo Aero's focus on proprietary (self-developed) technologies. Inspection plugs can be found on virtually all aircraft engines and gas turbines.

Sustainable development is a concept that has been interpreted in a multitude of ways in different contexts. This essay argues that the discourse of "ecological modernization" has strongly influenced the way in which the concept of ?sustainability? has been constructed in Swedish environmental policy. This interpretation of the concept of sustainability offers the possibility of combining economic growth with ecological sustainability which stands in contrast to the assumptions of Deep Ecology and Green Theory. The aim of this essay is to explore how the concept of sustainability is being formulated in environmental policy both on a national level and in the city of Malmö.Considering these issues in a specific context, this essay focuses on city planning that is as an important instrument to promote urban sustainability both on national and local levels.

The Master Thesis has been carried out in cooperation with Silva Sweden AB and the objective was to develop a new product concept within the product category for everyday exercise. The purpose of the thesis was to use and analyze methods and tools which aid creativity and concept creation in order to make method recommendations for future projects.During the thesis a number of customer needs were identified, which in turn were translated into 20 concepts. On a concept decision meeting a pedometer-based concept was chosen for development. The new pedometer is in addition to counting steps also able to measure and calculate the user?s total climbed height during a day and present this graphically in comparison to famous monuments or distances.

The Innovation- and Design Engineer program at Karlstad university is a three year long engineer education. In the last phase a final piece is to be done and in this case Boda Borg in Skellefteå is the company in need of product development. Boda Borg is a company in the experience industry and they are located in nine cities from Gällivare in the north of Sweden to Karlskrona in the south. Boda Borg is a franchise company where every facility is their own. As a visitor you will experience physical challenges as well as intellectual in adventure rooms which are serial linked.

The Innovation- and Design Engineer program at Karlstad university is a three year long engineer education. In the last phase a final piece is to be done and in this case Boda Borg in Skellefteå is the company in need of product development. Boda Borg is a company in the experience industry and they are located in nine cities from Gällivare in the north of Sweden to Karlskrona in the south. Boda Borg is a franchise company where every facility is their own. As a visitor you will experience physical challenges as well as intellectual in adventure rooms which are serial linked.

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

The purpose of this work was to research how baby nurses define the concept child maltreatment and how they conduct themselves to mandatory reporting.The central questions were; How do the baby nurses interpret the concept child maltreatment and which children do they consider comprehending the concept?What are the reasons that children are maltreated according to the baby nurses opinions?Do the baby nurses apprehend that they meet children that are maltreated in their work?How do the baby nurses interpret the mandatory reporting and what course of action do they use when they suspect child maltreatment?Nine baby nurses were interviewed. The material was analyzed with the help of a phenomenological method.The participators idea of the concept child maltreatment was focused on observing signs from the child and concrete actions from the parents. The outcome of this concept is that the participators categorization is neither or nor. The participators knew about the mandatory reporting and they did a further interpretation because they focused on the risk of the child.

The aim of this thesis was to investigate the possibility of integrating an item tracking systemwith a monitoring system currently under development at Fifth Generation Technologies (P) Ltd.A literature study of RFID technology and the networks ZigBee and MiWi was done. Based onthe literature study a concept for a distributed system was developed.The concept is to have several RFID readers placed in the area where tracking is to be performedand allow them to communicate with each other through wireless communication. The RFIDreaders shall be able to form zones and filter the data that is forwarded from the zones to theservers and thus perform some of the work that the server would normally have to do. Theconcept has been evaluated by prototype development and testing. The prototype uses an ultrahigh frequency RFID reader and a MiWi network.The test indicated some limitations with the selected technologies.

Uppsala universitet The aim of this master?s thesis is to investigate, through text analysis, the role of copyright in development, with particular interest of how the concepts knowledge and access to knowledge are used in Access to Knowledge Draft Treaty and WIPO Development Agenda. The definition of the concept knowledge, as it is used in copyright, is based in a Western historical and philosophical context and therefore excludes knowledge created in another type of society. The consequences of this exclusion have effects on development. Further it is stated that knowledge according to the global copyright scheme will be reduced to a commodity, which will have consequences not only in societies in the global South.