This report is the result of a thesis work in Integrated Product Development, regarding hygienic features in dishwashers and especially disinfection by the use of steam.The thesis is performed at Electrolux Primary Development Dishcare in Stockholm and in collaboration with the Department of Machine Design at the Royal Institute of Technology.The targets of the thesis are to prove the advantages of a technology suitable to implement as a hygienic feature inside a dishwasher and to realize a functional prototype of a differentiated hygienic feature that does not exist on the market today.The process followed to perform the thesis is the process defined for Electrolux Primary Development.The technology chosen for development is disinfection by heating the water on the surface of the dishware, by the use of steam.A number of tests on how steam behaves when injected into the dishwasher tub have been performed, providing the results that have been taken in consideration when designing the prototype.The prototype consists of a pipe system provided with nozzles to eject the steam into the upper parts of the dishwasher. Tests of the final prototype show that thermal disinfection of water in a dedicated area of the tub can be reached within 9 minutes. The operation requires 0,17 liters of water and consumes 0.2kWh..

This thesis examines how a company can get an effective, high quality, maintenance of their computerized systems. After literary studies concerning the life cycle activity Maintenance we have studied how the maintenance at the department IT Supply of IKEA IT AB in Älmhult is carried out. What steps and measures in the analyzing of results of changes are carried out and if they have predefined processes for changes. Based on the facts we found most important in our literary studies we have created a model and theoretically applied this to the maintenance of a specific system to see what they can work with to further improve the quality and efficiency in their maintenance. The basis for our thesis is literary studies and the collected material has been used as a foundation for the research at the company, which was carried out through interviews. This thesis is based on the question: ?How do the lack of a model for maintenance and the lack of orientation affect the maintenance in a company??.

The purpose of this project was to investigate whether it was possible to develop a type of application, where users would solve chess problems. The main goal of the project was that there would exist an functional application after the study has ended with which users could solve chess problems on a computer. One subgoal of the project was to create corresponding application for mobile phones. The study was limited to require users to have at least Internet Explorer 9 +. For other browsers, there were no corresponding limitations.

In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

To make it easier for forestry planning the forest owners needs data which describe characteristics of the forest. Such data you usually get from some type of inventory. A relatively new technology which probably is getting more important in the future, is laser scanning because of lower costs. But because the laser technology is relatively new you need to compare it with conventional inventory technologies to get better understanding of the possibilities the laser technology gives. This work intends to estimate field measured characteristics of the forest from laser data with help of regression analysis and then see which of the field measured properties that best could be estimated and which laser variables that gave the best results. This study shows that heights has the best estimates, but biomass, diameter and volume also gives good estimates.

This bachelor thesis includes two different manuals and design of an interface box between a test object and a general test station (computer) with ARINC429 communication.There are three different purposes with this project:The first is to setup a general test station with ARINC429 communication using a communications card from DDC (DD-42916i3-300) and software from Ampol Technologies (dataSIMS).The second is to design a new interface between the test computer and the test object. As well as implementing two components in the equipment.The third is to write two separate manuals to guide the users of this equipment. There are two different kinds of users of this equipment, technicians and system engineers. Technicians use the equipment to test and repair flight components. System engineers will implement new components in the equipment.The result of this project is a working test station with a new interface and two manuals..

The purpose of this thesis for Sapa Heat Transfer is to examine a furnace in which aluminium is pre-heated before hot rolling. The project is modeled in a computer environment in which the air flow in the furnace and the heat transfer to the aluminium solids are included. The computer environment and its governing equations, as well as boundary conditions and generalizations, are presented and explained.The simulations are based on two models. The first model has an asymmetric solid placement, which is how it looks in today's ovens. It is validated against collected data.

Intranet is today a common technical groupware to communicate in many organisations. People can interact through the Intranet and communicate within the organization and get relevant information according to their workplace. It can be difficult to get everybody to use the Intranet as an information- and communication tool. This causes problems when people want to reach out with information. With these thoughts we entered our work at Luftfartsverket at Arlanda airport.

Along with the development of technology, the cross-border trade is increasing and therefore there is a need for greater consumer protection. A good consumer protection creates a feeling of safety for the consumer and that by itself may help to increase cross-border trade. This is one of the reasons for why the EU has established regulatory framework for electronic commerce, for example the Directive2000/31/EC. The direc-tive strives to create a similar law for electronic commerce within the European Union. This paper?s main purpose is to ensure that the directive is implemented properly in Swedish law, and if there are other possible ways to achieve the objective, other than the ones that the Swedish legislator has chosen.

This master?s thesis investigates the technology and security awareness associated with wireless networks (WLAN). It has been stated by the media and theories that many wireless networks are unprotected. This has sparked an interest to investigate the phenomenon in the Jonkoping region. The study is based on the following research questions:- What security weaknesses are present with the WLAN-technology and how can these be avoided?- How does the wireless infrastructure in the Jonkoping region look like?- Why do companies implement the WLAN-technology?- Are the companies aware of the risks involved with WLAN?We conducted this study in three steps; the first step was to hack a wireless network in a controlled environment in order to investigate the weaknesses of the commonly used security measures.

The reason for this study is to settle the balance between technology and preponderance in war. Each theory claims its own superiority to be decisive when it comes to achieving military victories, but this study will show what actually happens when the two theories are analyzed together in the same conflict. To prove the conclusions, a case-study on Operation Gazelle is used. The study will describe the theories, what a military victory is and which party in the conflict came out victorious after this specific operation. Both sides? forces will be shown and compared.

Vår kandidatarbetstid har resulterat i nio stycken småfilmer som är till för att ge mer information om BTH och regionen för nyfikna. Fyra av dessa filmer innerhåller lite mer information om region, boende/kommunikationer, skolan och det studiesociala. Syftet med dessa fyra filmer är att blanda in BTH på olika sätt, att man sätter skolan som en röd tråd även i region och bostadsfrågorna. Vi gjorde även fyra stycken studentintervjuer, för att visa vad nuvarande studenter tycker om bostadsmöjligheterna och det studiesociala mm. Vi ville även visa att det finns folk från Kiruna i norr till Lund i Söder, som går på skolan, och att det finns många olika typer av människor som du får möjlighet att lära känna om du börjar studera här.

Miljöbron is a non-profit organization; their main purpose is to merge companies and students into different environmental projects. The projects can be an assignment, practical vocational training or degree thesis. Miljöbron is expanding and the demand from students and companies is rapidly growing. Because of the expansion, a large amount of information needs to be stored and managed in a structured database. Also the need of a interface that is structured and easy to use when managing information and Miljöbron?s statistics, for Miljöbron?s staff.

Along with the development of technology, the cross-border trade is increasing and therefore there is a need for greater consumer protection. A good consumer protection creates a feeling of safety for the consumer and that by itself may help to increase cross-border trade. This is one of the reasons for why the EU has established regulatory framework for electronic commerce, for example the Directive2000/31/EC. The direc-tive strives to create a similar law for electronic commerce within the European Union. This paper?s main purpose is to ensure that the directive is implemented properly in Swedish law, and if there are other possible ways to achieve the objective, other than the ones that the Swedish legislator has chosen.

The military conflicts of the early 21st century have seen the introduction and rise of a new military technology: the armed drone. With the United States acting as the driving force behind this technological advancement, the U.S Air Force and intelligence agency CIA have madedrones their weapon of choice for pursuing suspected terrorists and insurgents in various remotelocations. American military leaders and policy makers assert that the armed drone?s high levelof accuracy make it the best available weapons platform for this task. However, new researchshows that the use of drones may result in more civilian casualties than previously thought, andmay in fact be more fallible than conventional aircraft in this respect.