The purpose of this project is to analyze earthing systems for houses. By practical measurements and theoretical analyzes consequences of possible faults, that can occur within the facility and in the low-voltage distribution network, is illustrated.  The reason for this project is that nowadays one has to arrange with a main equipotential bonding system for buildings. Apart from that, if necessary, bathrooms must be provided with a supplementary equipotential bonding system.The practical measurements verify that potential differences in facilities may be due to voltage drops in the PEN conductor between the origin of the electrical installation and the power transformer.Based on the theoretical analyzes of possible faults, it is considered that the requirement for  supplementary equipotential bonding systems for bathrooms in most cases can be questioned, when basic insulation, fault protection, residual current devise and main equipotential bonding system already provides an adequate level of protection.A PEN conductor loss may result in a situation where metallic parts attached to the equipotential bonding system starts working as earth electrodes. Equipotential bonding system may also increase the incidence of stray currents. If TN-C-S systems is provided with a local connection to earth a redundant system against PEN conductor loss is obtained.

Intelligibility is a central concept in speech-language pathology regarding assessment and treatment of speech. At present, there is no reliable or valid Swedish test for measuring intelligibility. The main purpose of the current study was to conduct a clinical trial of the computer-based intelligibility test ?Swedish test of intelligibility for children? and to investigate the test?s reliability. Another purpose was to investigate the reliability of the rating form ?Intelligibility in context scale?.

Detta examensarbete är det avlutande momentet på civilingenjörsutbildningen Ergonomisk design och produktion vid Luleå tekniska universitet. Målet med projektet är att designa en helt ny skotermodell exteriört. Tyngdpunkten i projektet är utseendet men även andra aspekter behandlas, så som ergonomi, materialval och tekniska lösningar. En Internetbaserad enkätundersökning, marknadsundersökning samt systematisk problembehandling ligger till grund för designen av fyra grundkoncept. Dessa undersöks genom strukturerat konceptval samt samråd med uppdragsgivaren.

Computer Forensics investigations have become more and more common while investigating IT-related issues. From experience, hard disks, USB thumb, memory sticks contains information that might be useful. Computer Forensics is regulary conducted by Police, Customs, Tax investigators but also within private companies and organisations. However, there are areas within the storage device that are not part of the organisied structure that a file system gives. The reason for that might be that the information has been erased by intention, a virus destroyed the file system and so on.

At the end of 70s and the beginning of 80s, 18 terminals was built and used for chipping wood residue from clear cuttings. Most of the terminals was terminated before the 2000s but with the high oil- and energy prices that we can see today there might be a place for these terminals again. The goal with the study was to analyze and compare economical differences between 5 different logistical systems, collected data was used with a set of formulas. The systems include long range transport of slash, chips and bundles. Three of the systems include transport by lorry to industry the last two includes a terminal with access to train transport.

This report describes a study aimed at uncovering flaws and finding potential improvements from when the modelling tool EAAT is used in conjunction with the modelling language CySeMoL. The study was performed by developing a framework and applying it on CySeMoL and EAAT in real life context networks.The framework was developed in order to increase the number of flaws uncovered as well as gather potential improvements to both EAAT and CySeMoL. The basis of the framework is a modified version of the Quality in use model from ISO/IEC 25010:2011 standard. Upon the characteristics and sub characteristics of this modified model different values for measuring usability where attached. The purpose of these values is to measure usability from the perspectives of both creating and interpreting models.

This report describes a study, description and testing of parts to an application adapted to the operating system Android. The application is supposed to measure the distance to a car ahead. Apart from distance measurements the ability of the application to calculate its own speed with the help of GPS is tested. From these two parameters, speed, distance and some constants the theoretical stopping distance of the car will be calculated in order to warn the driver if the car is too close to the car ahead in relation to its own speed and stopping distance.Tests were conducted on the different applications that were programmed and the result showed that the camera technique in the mobile phone itself limits the maximum distance of the distance measurement application. The max distance the tests in this thesis revealed was approximately 5 meters.

The aim with this study is to explore if and how linguistic learning takes places when four pairs ofstudents in grade one writes on the computer. Observations of eight students took place duringtwelve lessons to investigate what happened during their writing processes. This study isimportant because students? computer writing is a relatively new phenomenon in the Swedishprimary school.It is clear that the peer collaboration creates a complex interaction that becomes the platform, andalso the prerequisite, for successful language training. The method can clearly give students profitsin their linguistic development.

The main purpose of this paper is to examine librarian's opinion of computer filters, to bring order in the debate on these filters and also to encourage future debate on this subject. The main problem is whether librarians themselves think they have the right to limit the public access to information on the Internet by using computer filters. We will also see how many public libraries are using filters, why they have chosen to use or not to use them, what is the librarians' opinion of filters, what rules exist regarding the use of the Internet, and finally if it is legal to use filter programs in public libraries. We have also included a short report on what filters are and how they work. This paper deals only with Swedish conditions on a number of public libraries.

This degree project deals with the creation of a business system for Gamersneed Sweden. The system is divided into two parts, one windows appliction and one websolution..

The aim was to evaluate and suggest improvements for the prototype TIVOLI (sign-learning via computer-based playful interaction). The game purposed to give children who need signing as augmentative and alternative communication enhanced signing skills. Three children in need of signs played TIVOLI at home during 4-5 weeks. Data contained parental interviews, Talking Mats interviews, assessment of signing competence before and after the evaluation period and game protocols. One game interaction per child was filmed.

Highland Group AB was helping a customer of theirs to create an All-Terrain Vehicle (ATV), a project Highland has never been involved with before. For the wishbone arms of the wheel suspension, traditional manufacturing methods and tubes with cylindrical or square shaped cross section was preferred. We performed a simulation where the ATV was driving on a bumpy road too see the forces involved. With the results we proceeded to calculate the strength of the concepts to find out which is best suited for the tough environment in which the ATV is used. The concept that turned out to be the best was a wishbone made of circular cross section, which had good structural strength and did fulfill the demands that we required for the construction.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

Handling materials and packaging, which is the focus of this study, requires efficient logistics, both internally and between companies. To achieve an efficient material flow, good information systems, whose role is to collect, store, process and distribute information, are required. The assumption that packagings are handled in an efficient manner is currently not a matter of course, when many companies do not prioritize the internal management of the package.The purpose of this report was to investigate how medium-sized businesses working with distribution and handling of spare parts packaging can improve their internal management of packaging. In order to answer the purpose, we have used an abductive process and a qualitative data collection. The study had Logistic Center Ljungby (LCL) at Electrolux Laundry Systems (ELS) as a case company and two other respondents, Nibe in Markaryd and Enertech in Ljungby.

This report is on concrete work during the winter and is implemented on Peab?s behalf. The assignment was to describe the differences between a summer- and a winter casting. While it shows the complications that exists, it also show what aids are available, both electronic via computer and physical aids.The information that I have developed is originally from theory in books, information on the internet as well as practical experience from knowledgeable people that works in construction output. Other theories are those I have learned throughout the education to become a construction engineer, including all oral sources over the years.The results I have come up with, I hope will be able to help future construction projects in the planning phase of a winter casting.