This study presents a methodology that enables the annual average power of a wind turbine to be increased by automatically optimizing it?s airfoil, twist and chord dis- tribution. As a part of the study the software SiteOpt has been developed. This software connects the open source software XFOIL with the blade element momen- tum theory. XFOIL gives lift and drag coefficients which enable the blade element momentum theory to predict the power of a wind turbine at different wind and ro- tational speeds.

Cache simulator is a tool to increase the understanding of a cache memory. Therefore cache memory simulation is included in the course Computer Engineering IS1200 at the Royal Institution of Technology. The purpose of this project is to develop a cache memory simulator for education. The existing MipsIt and Mips Simulator which is currently used in IS1200 has been the main source of inspiration. This resulted in the development of the cache memory simulator LMSim.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

In 2012 blogging reached an all time high in Sweden. Around 400,000 people made blog posts at least one time during this year. Blogs have publishing as a main purpose and can after publication be read by anyone with a computer, smartphone or tablet with an Internet connection. This makes the blogger open to response through comments that can be either constructive or destructive. No research has been made regarding blog comments and their effect on bloggers and their writing process.

Detta projekt har producerats i samarbete med Abu Garcia i Svängsta, Blekinge. Vårat projekt är en interaktiv produkt presentation gjord i flash med inslag av 3d, video och ljud. Våran tanke är att användaren ska kunna se hur en Ambassadeur Record fiskerulle ser ut både på insidan och utsidan, hur den fungerar och vad som gör den så unik. Det finns också video filmer som beskriver tillverknings processen, och hur man som förstagångs användare använder en Ambassadeur rulle. Design och bakgrundsljud är anpassad så att den ska väcka en känsla av fiske och fridfull utomhus miljö..

Introduction: Sleep disorders are an increasingly growing public health problem. InSweden, the last decade's increase in sleep problems was greatest among younger agegroups. Studies show association between the use of communication media and sleepinghabits. Objective: The aim is to map sleep habits and use of communication mediumamong adolescents and to study associations between them. Method: The study isbased on a previously collected survey data among high school students (18-21 years)from a coastal town in southern Sweden.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

Requirements Engineering processen, RE-processen, är den tidiga fasen i ett systemutvecklingsprojekt, där RE-processens syfte är att identifiera, verifiera, validera samt dokumentera en mängd krav som ett nytt eller utvidgat system skall konstrueras efter. RE-processen skall mynna ut i en kravspecifikation där de dokumenterade kraven finns samlade.Detta examensarbete behandlar ämnet systemutveckling och fokuserar på konsultföretags metodanvändande under RE-processen. Att fokus ligger på RE-processen beror på att denna fas är den mest kritiska delen i ett systemutvecklingsprojekt.För att få svar på vilka metoder som konsultföretag använder under RE-processen har en intervjundersökning gjorts.Resultatet av undersökningen visar att konsultföretag använder olika metoder under RE-processen. Sättet att använda dem fungerar på ungefär samma sätt med ett aktivt deltagande från kundernas sida. Systemutvecklingsmetoderna är också uppbyggda på liknande sätt med samma synsätt att arbeta efter..

This report is the documentation of a project in the education Master of Science in Mechanical Engineering. The project was carried out at Alfakonsult AB. The purpose of the project was to map out the transference of information between the different operators in the supply chain of medicine in Sweden and to analyse this in order to reduce lead-time and the total throughputtime. The supply chain of medicine in Sweden consists of producers, distributors, one wholesaler, prescribers and patients. The mapping of the transference of information showed that most operators in the supply chain have done well introducing technical aids to facilitate the transference of information.

The purpose of this study was to investigate pupils' and teachers' experiences of using the simulator computer game Minecraft in connection with the Swedish school competition Future City. The study examines how students (ages 14-15) and teachers have experienced the use of Minecraft, what the students have learned in relation to everyday education and the different forms of education during Future City and also examine which patterns that exists in the experiences of the students, with personal interest of and knowledge of Minecraft as a benchmark. The study was conducted through individual semi-structured interviews with both students and teachers. The analysis of the results is based upon a theoretical perspective that includes a socio-cultural view of learning, as well as the lines of reasoning in previous research about computer games and learning. As a general approach towards the study, and in a way, a justification of the chosen research method, a hermeneutic approach was used.

This thesis primarily includes a study on whether companies can develop a mathematical activity that supports students' motivation in mathematics. The work was done together with Midroc Electro, a company that pays attention to the difficulty of recruiting and therefore was interested in investigating how the business world would be able to contribute.The thesis can be divided into three stages. The first part comprised by a exploration into research on student motivation regarding mathematics as well as numerous interviews with engineers to see how the research findings did fit with Midroc Electros reality. In these studies it became clear that the student who aims for a profession whose education or work requires math belongs to the group of students who primarily manage their studies in mathematics, that is, those that have the greatest motivation to work hard and complete their studies.Research information and interviews were compared and resulted in the thesis second part, Midroc Challenge. An activity where students primarily came to learn about the engineering profession and secondly how mathematics can be used in the engineering profession.

The purpose of this Bachelor thesis is to examine how user-friendly the OPAC of the Märsta public library is considered to be.Theoretical basis are HCI and Allwoods definition of usability. Issues are: Is the OPAC suited to its task? Is the OPAC user-friendly? How well does a user accept the OPAC? and What degree of competence is shown by users of the OPAC? The source material consists of six interviews in the form of .avi files. The method I have chosen is qualitative semi-structured interview form. The result is that, based on Carl Martin Allwood?s defini-tion and with exception for the using of help-resources, the usability of Märsta?s library OPAC can be considered less good..

Sekretessbelagd.

Vid produktutveckling inom industriföretag finns idag luckor vad gäller IT-stöd i arbetets olika faser. Införandet av s.k. RBE-system (Rule Based Engineering) är ett steg på vägen mot att försöka fylla dessa luckor. Meningen med ett RBE-system kan sägas vara att ersätta traditionella konstruktionshandböcker med motsvarande konstruktionsanvisningar i digital form. Detta ger möjligheter till automatisering av processer som är tidskrävande, monotona och ofta förekommande, t.ex.

The project deals with the evaluation and testing of speaker and microphone elements as well as microphone cavity.The first part of the report comprises a comprehensive theoretical part about drivers, microphone elements, and to some extent microphone cavity.The goal was to , on the behalf of the company Limes Audio AB, develop proposals on microphone element and cavity as well as drivers for a speakerphone application, based on specific factors. The main factors were performance, price and form factor.The aim was to create the best possible conditions for Limes Audio's software developers to implement the company's audio-enhancing software, mainly adaptive echo cancellation.The testing was carried out using Adobe Audition and MatLab. The test methods were developed in conjunction with Limes Audio and are described below.The project will result in suggestions for a speaker, a microphone and a cavity. The cavity were removed from the product because the results indicated that the cavity matter little for the end result.The report concludes with a discussion on how the measurements could have been enhanced to simplify the interpretation of the results and making the testing more efficient..