Gamification är en strategi som använder spelmekanismer och spelkomponenter för att skapa motivation och engagemang hos användare av olika typer av system. Denna studie syftar till att undersöka om gamification kan användas för att motivera användare av system för tillverkningsindustrin.Studien har genomförts med en initial litteraturstudie och kvalitativa intervjuer med experter inom gamification samt utveckling av system för tillverkningsindustrin. Intervjufrågor har därefter ställts mot tidigare genomförd forskning, för att identifiera möjliga resultat.Resultatet av denna studie visar att spelmekanismer och spelkomponenter skulle kunna användas i ett system för tillverkningsindustrin, förutsatt att det finns ett tydligt affärsmål, mätbar och användbar data samt identifierade drivkrafter hos organisationens maskinoperatörer. Vidare har ett antal punkter identifierats som kan vara motiverande för en användare av system för tillverkningsindustrin:Möjlighet för operatörerna att följa utvecklingen i sitt expertområdeKartläggning av operatörernas drivkrafter, vilken därefter används för att förbättra operatörernas arbetssituation, med exempelvis mer givande uppgifterBelöningar som utdelas är matchade mot operatörernas preferenser, med syfte att vara mer effektiva som motivationsskapare.

The aim was to evaluate and suggest improvements for the prototype TIVOLI (sign-learning via computer-based playful interaction). The game purposed to give children who need signing as augmentative and alternative communication enhanced signing skills. Three children in need of signs played TIVOLI at home during 4-5 weeks. Data contained parental interviews, Talking Mats interviews, assessment of signing competence before and after the evaluation period and game protocols. One game interaction per child was filmed.

This report describes a master thesis performed at Saab in Arboga. The main purpose was to build a controller for a system containing a turn table and an antenna beam. The idea is to use this system on a boat where it will be exposed to position disturbances due to waves. The desired behaviour is that antennas placed on the antenna beam should point towards the same target all the time. To solve this problem the system has been modeled and simulated in Matlab and Simulink.

Highland Group AB was helping a customer of theirs to create an All-Terrain Vehicle (ATV), a project Highland has never been involved with before. For the wishbone arms of the wheel suspension, traditional manufacturing methods and tubes with cylindrical or square shaped cross section was preferred. We performed a simulation where the ATV was driving on a bumpy road too see the forces involved. With the results we proceeded to calculate the strength of the concepts to find out which is best suited for the tough environment in which the ATV is used. The concept that turned out to be the best was a wishbone made of circular cross section, which had good structural strength and did fulfill the demands that we required for the construction.

A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..

Background: Evaluation of lameness in horses is traditionally performed by a veterinarian who subjectively evaluates the movements of the horse. Accordingly, lameness diagnosis varies with the veterinarian and circumstances for which the horse is examined. Research within the area has long tried to establish an objective and standardized method for lamenessevaluation in horses. Several methods have been shown to be reliable and are used regularly within research, for example measurement of forces between the hoof and ground, and measurement of movements with high speed cameras or accelerometers. However these methods require considerable preparation, standardization, and expensive equipment as well as produce large amounts of data that are incomprehensible for the clinician.

When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.

This report is on concrete work during the winter and is implemented on Peab?s behalf. The assignment was to describe the differences between a summer- and a winter casting. While it shows the complications that exists, it also show what aids are available, both electronic via computer and physical aids.The information that I have developed is originally from theory in books, information on the internet as well as practical experience from knowledgeable people that works in construction output. Other theories are those I have learned throughout the education to become a construction engineer, including all oral sources over the years.The results I have come up with, I hope will be able to help future construction projects in the planning phase of a winter casting.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..

The main objective of this thesis is to examine the situation concerning information technology, computers and information resources for university students at a selection of universities, and their libraries, in Sweden. Another objective is to compare this situation to what is stated in policy documents on the subject, and if the size of the university matters regarding resources. The thesis starts with a discussion of several authors, Frank Webster, Paul F. Burton and Lars Qvortrup among others, and their views on the information society. These range from whether we are living in it, are in a transition period or are still in the Industrial Society.

Achievements within the fields of computer- and telecommunication technology have led to a revolution when it comes to managing information. These achievements have made it possible to offer new services in healthcare, especially in telemedicine. New technology has become a complement to traditional care, thus partly compensating for insufficient time and resources. Telephone Linked Care (TLC) is a telecommunication technology that enables automated dialog counselling and monitoring of patients in their homes. During the last two decades numerous randomized controlled studies with TLC have demonstrated improvement among outpatients with chronic and health behaviour disorders.

Purpose: The objective of this study is to illustrate how participants in leaderless based projects communicate with each other. Several studies have focused on technology-supported projects, such as open source projects, with an established project manager and goal. There is a lack, to the best of our knowledge, in studies that deal with the communication pattern in a leaderless computer supported collaborative project.Method: We have chosen to use a quantitative method where we systematically group several messages according to their content. This method was used in a similar study to illustrate the communication between participants involved in an open source project. We have taken the same Kripendorff based method and adapted it to our study by adding more descriptive variables.Theoretical perspectives: Manuel Castell discusses the aspects of a new communication power that is rooted in the individual as part of a larger creative audience.

Syftet med undersökningen är att ta reda på om begreppet ?Tekniska system? tas upp i förskolan. Dessutom undersöks hur förskolorna arbetar med teknik enligt den reviderade läroplanen, Lpfö 98.Som metod användes enkäter där pedagoger satt i arbetslagsgrupper och besvarade frågor. Enkäten används för att få en bättre bild av hur ålder, kön, tidigare utbildningar och yrkeserfarenhet förhåller sig till kunskapen av teknikämnet.Undersökningen visar att alla förskolor använde sig av begreppet tekniska system på ett eller annat sätt i samtal med barnen, till exempel vid toalettbesök, samt frågor ?vart tar rören vägen vidare till reningsverket??Vidare framkommer det att fler fortbildningsdagar och studiebesök är önskvärt för att pedagogerna ska få en större vetskap om begreppet tekniska system.

In this project we have used the theory of analytical mechanics to derive equations of motion for complex mechanical systems in order to study their behaviour over time. Even if the theory provides powerful tools to tackle tough problems which would be very hard to solve by methods of Newtonian mechanics, you are still relatively limited without running any computer simulations. One realises that in a faster rate it will be an incredibly difficult task to find an analytical solution when the degrees of freedom increases. Even if one would succeed to derive the equations, one still has to solve them to get the information of the systems behavior. Of experience one knows that the equations in general are nonlinear and hence must be integrated numericaly.