AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

This bachelor thesis portray a project where the main task were to develop a computer based system prototype for handling of absence report at the upper secondary school af Chapman in Karlskrona. The project has been conducted in cooperation with students from the university programs software engineering and information economy at Blekinge Institute of Technology. Our task as MDA-students have been to survey the process of absence report of today through field studies and give a proposal of a graphical user interface which later were developed by the software engineers. The thesis also handles the cooperation with other students from other university programs..

In today?s society computers are getting a much more important role. To get a computer to work as intended it has to be programmed. A computer program is written with programming languages. There is an abundance of programming languages available today and there are many differences and similarities between them. The different languages have their advantages and their disadvantages where some of them are intended for fast performance, some to be cheap on memory usage, and some are developed to be easy to program on. In our thesis we have chosen to compare four of todays most common languages, C, C++, Java and Python.

The competitive nature of the automotive industry has always implied a necessity to improve product development concerning time-to-market, cost and product quality. As capacity of computer-aided engineering (CAE) tools has evolved, so has the strive for simulation-driven design. Virtual durability testing using full vehicle models is one of many challenges posed in front of vehicle manufacturers when computer simulations are given a key role in product development.This thesis has been initiated as a preliminary step towards implementing dynamic virtual durability testing in the development of buses and coaches at Scania. The objective has been to assess the predictability of a full vehicle coach model and to what level of precision structural loads can be predicted. Previously performed proving ground testing of a Scania Touring coach has been the basis for the modelling and simulations in this thesis.A virtual model of the Scania Touring coach has been created in multi-body simulation software package MSC.Adams.

With recent technical development computer aided design and manufacturing has taken amore important role in the product life cycle. New business segments such as Product/ServiceSystems and remanufacturing is emerging. This development demands better control of theproduct data throughout the entire product life cycle. Computer aided design is widelyrecognized and used within the manufacturing industries and in recent years the importance ofDigital manufacturing has increased. One part of Digital manufacturing is paperlessproduction which involves all orders and working instruction shown for example on a screenrather than on a piece of paper.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

ThisreportisathesisfortheTechniciansinComputerAidedDesignprogramatHalmstadUniversity.Thegrouphasdevelopedamillingmachinemainlyusedforfiberboards,onbehalfofJohanWretborn..

Detta arbete ämnar undersöka problem och utmaningar relaterade till design- och produktion av ett tävlingsinriktat spel för gratis utgivning samt utforska potentiella lösningar och designfilosofier genom att påbörja utveckling av ett spel. Problem som uppstår, lösningar som tillämpas och val som görs dokumenteras varpå resultat analyseras. Undersökningen tar upp design av både spelmekaniska och grafiska element samt produktionen av spelet och dess resurser, saker som är viktiga att tänka på och några saker som kan gå fel..

By today?s date there are a lot of companies that are in great need of restructuring their paperwork in a more organized way. This can be excellent arranged with the help of properly constructed computer software. The aviation industry is no exception, but actually a good example of this. Täby Air Maintenance (TAM) is a company which is situated in Örebro.

Syftet med detta kandidatarbete är att testa en arbetsmetod som skiljer sig ifrån det en mindre grupp i vanliga fall använder sig av: en komponentbaserad arbetsprocess för att utforska och sammanställa arbetserfarenheten med den komponentbaserade arbetsmetoden, utvecklar vi därför ett digitalt spel..

Detta examensarbete är det avlutande momentet på civilingenjörsutbildningen Ergonomisk design och produktion vid Luleå tekniska universitet. Målet med projektet är att designa en helt ny skotermodell exteriört. Tyngdpunkten i projektet är utseendet men även andra aspekter behandlas, så som ergonomi, materialval och tekniska lösningar. En Internetbaserad enkätundersökning, marknadsundersökning samt systematisk problembehandling ligger till grund för designen av fyra grundkoncept. Dessa undersöks genom strukturerat konceptval samt samråd med uppdragsgivaren.

Abstract The purpose of writing this thesis was to improve methods during requirements engineering phase. Usercentred system engineering has some problem areas, which are examined and verified to create a new guideline for developers. This guideline tends to make requirements engineering more effective and help developers create more concrete requirements. It is not uncommon that system development projects ends up with unsatisfied users or delay in deliveries. The reasons are different kinds of communication problems between users and developers during verification of requirements. There is a therapy model, called solution-focused therapy, used in family and individual therapy. The model focuses on solutions for the future instead of problems in the past.

Highland Group AB was helping a customer of theirs to create an All-Terrain Vehicle (ATV), a project Highland has never been involved with before. For the wishbone arms of the wheel suspension, traditional manufacturing methods and tubes with cylindrical or square shaped cross section was preferred. We performed a simulation where the ATV was driving on a bumpy road too see the forces involved. With the results we proceeded to calculate the strength of the concepts to find out which is best suited for the tough environment in which the ATV is used. The concept that turned out to be the best was a wishbone made of circular cross section, which had good structural strength and did fulfill the demands that we required for the construction.

Systemet som förenklar hantering och information av tidrapportering, projekt, kunder, lager och anställda. Syftet är att företaget skall få en mera överblick över deras verksamhet, då all information samlas på samma ställe. De anställda kan via webben snabbt och enkelt rapportera in deras arbetstider under den gångna veckan. Systemet innefattar: SMS-tjänst, automatiskt utskick, hanteringen för lager, projekt, kunder och semester, kontinuerlig statistik med grafiska diagram samt utskriftsfunktioner. Allt är utvecklat i PHP och MySQL..