This thesis has been focused around the Diels Alder reaction with the goal to design an enzyme catalyzed reaction pathway. To achieve this goal computer aided enzyme design was utilized. Common traditional methods of computational chemistry (B3LYP, MP2) do not do well when calculating reaction barriers or even reaction energies for the Diels Alder reaction. New calcu- lation methods were developed and tested. This was the focus of the first part of the thesis, by choosing a small system, extensive and heavy calculations could be done with CBS-QB3.

Introduction When a child comes into a family changing conditions for the older sibling, who may feel left out. This can be a problem for parents who face new challenges towards the older sibling, which can lead to parents looking for advice and support. Parenting is an activity that strengthens the role of parents and provides information about children's health and social development. Purpose The purpose is to describe the parents' experiences of support in their parental role by participating in the sibling circle. Method Semi-structured focus group interview was conducted and qualitative content analysis was performed.

The aim of this thesis was to answer a number of questions about the environmental consequences of aircraft de-icing. A further aim was to suggest how the environmental consequences due to the release of de-icing fluids can be measured and reduced.The main impact of the aircraft de-icing on the environment is due to the large oxygen demand for the degradation of glycol based de-icing fluids which are released in the environment. The effect of the increase in oxygen demand depends on where the degradation occurs in the ecosystem. In a sensitive ecosystem, the large demand of oxygen could provide an anaerobic environment which would be harmful for many types of organisms.In order to reduce the negative effects of the applied de-icing fluid, there is some type of collection system at every regular airport in Sweden. The methods of collection can be divided into two general groups, hydrological isolation or vacuum sweeper trucks.

Denna rapport utgör dokumentationen av ett examensarbete utfört på Atlas Copco Secoroc i Fagersta under handledning av Maskinkonstruktions före detta universitetslektor Håkan Wettergren och Fluid & Mekaniksystems professor Karl-Erik Rydberg och på Atlas Copco Secoroc konstruktör Risto Wisakanto, avdelningschef Thomas Greijer, båda avdelning DTH, samt Secorocs utvecklingschef Lars Holmgren.   Arbetet syftar till att utveckla en simuleringsmodell vilken ska användas vid utveckling av pneumatiska sänkborrmaskiner. Målsättningen var att göra en så bra modell som möjligt, en modell som skulle kunna användas vid utveckling av nya sänkborrmaskiner, och att stegvis förfina en i grunden enkel modell. Första modellen var dock lite för enkel och baserad på teori för slutna system så den gick inte bygga vidare på utan det var enklare att göra en helt ny modell baserad på teori för öppna system. Det var dock inte förgäves att bygga den första modellen utan de geometriska villkoren som använts i den enkla modellen kunde återanvändas i den mer avancerade som tack vare detta relativt snabbt kunde skapas.  Den mer avancerade modellen ger värden som stämmer mycket bra överens med mätresultat vid höga tryck, i detta fall 16 bar. Att modellen inte stämmer överens så bra vid låga tryck kan bero på flera saker, naturligtvis på att faktorer som försummats kanske har stor inverkan vid låga tryck eller att mätvärdena helt enkelt är fel.

Examensarbetet handlar om en jämförelsestudie av beräkningseffektivitet med avseende på energi- och tidsförbrukning mellan grafikkort och processorer i persondatorer och PlayStation 3.Problemet studeras för att göra allmänheten uppmärksam på att det går att lösa en del av energiproblematiken med beräkningar genom att öka energieffektiviteten av beräkningsenheterna.Undersökningen har genomförts på ett explorativt sätt och studerar förhållandet mellan processorer, grafikkort och vilken som presterar bäst i vilket sammanhang. Prestandatest genomförs med molekylberäkningsprogrammet F@H och med filkomprimeringsprogrammet WinRAR. Testerna utförs på MultiCore- och SingleCorePCs och PS3s av olika karaktär. I vissa test mäts effektförbrukning för att kunna räkna ut hur energieffektiva vissa system är.Resultatet visar tydligt hur den genomsnittliga effektförbrukningen och energieffektiviteten för olika testsystem skiljer sig vid belastning, viloläge och olika typer beräkningar..

In this masters thesis we consider a method for experimental identification of the inertial parameters of an industrial robot, using measured torques and joint angles. A dynamic model of the first three joints of the robot has been identified.To achieve good identification results, it is important to carefully choose the trajectory for the experimental identification. A method to generate trajectories using two suggested design criteria has been used and evaluated using an ABB industrial robot, and one of them yields good identification results..

n this dissertation a comparison of two evolutionary methods for evolving ANNs for robot control is made. The methods compared are SANE with enforced sub-population and delta-coding, and marker-based encoding. In an attempt to speed up evolution, marker-based encoding is extended with delta-coding. The task selected for comparison is the hunter-prey task. This task requires the robot controller to posess some form of memory as the prey can move out of sensor range.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.

This thesis has been focused around the Diels Alder reaction with the goal to design an enzyme catalyzed reaction pathway. To achieve this goal computer aided enzyme design was utilized. Common traditional methods of computational chemistry (B3LYP, MP2) do not do well when calculating reaction barriers or even reaction energies for the Diels Alder reaction. New calcu- lation methods were developed and tested. This was the focus of the first part of the thesis, by choosing a small system, extensive and heavy calculations could be done with CBS-QB3.

The predominant forestry harvesting method is based on the harvester-forwarder method, theharvester folds, branches and cuts trees, and sorts the logs into piles, while a forwarder transportsthe logs to a landing area.This master thesis work is about realization of a dynamic forwarder simulation model, and itspurpose is to provide an integrated forwarder simulation model in MATLAB/SimMechanicswhere the forwarder is based on a concept using pendulum arms to connect wheels and chassis.Active suspension control is developed and implemented into the simulation model, and finallycompared in simulation with passive suspension.In a first step, an integrated forwarder simulation model is developed, containing a simplifiedforwarder model, a tire-to-ground interaction model and a test track model. The simplifiedforwarder model is based a rigid multi-body system with a spring-damper suspension of thependulum arms. The tire-to-ground interaction model calculates the reaction forces, friction fromthe ground and applies the propulsion force. The test track model is a simplified version of thereal test track in Skogforsk. The propulsion wheel torque control is used to regulate theforwarder speed.

A method for equine intra oral radiology has been tested. In the study, both a digital system with an intraoral sensor connected to a laptop and a system utilizing image plates and digital developing was tested, initially on cadaver sculls and finally on sedated horses. The digital sensor was not considered viable for this purpose, while the system with image plates and digital developing worked very well. Two different techniques, i.e. parallel and bisectris, are suggested for the best visualization of different parts of the teeth. Intra carious injections of Mixobar oesophaghus contrast fluid was found useful when evaluating the extent of carious lesions. Compared to extra oral radiology, the new method had several advantages and can be used both in clinic and field practices..

Affärssystem har de senaste åren uppträtt som kärnan i framgångsrik informationshantering och agerat ryggrad i många företagsorganisationer. Införskaffandet av rätt system är en komplicerad process, men ofta avgörande huruvida en framgångsrik implementering skall fortskrida eller inte. Perioden då företaget inskaffat ett system till den definitiva utrullningen är således ofta en krävande och kostsam process för organisationen. För att avgränsa begreppet affärssystem har vi valt att använda Gartner Groups definition: ?A collection of applications that can be used to manage the whole business?.

With numerous applications in both military and civilian life, the demand for accurate 3D models of real world environments increases rapidly. Using an airborne laser scanner for the raw data acquisition and robust methods for data processing, the researchers at the Swedish Defence Research Agency (FOI) in Linköping hope to fully automate the modeling process.The work of this thesis has mainly been focused on three areas: ground estimation, image segmentation and classification. Procedures have in each of these areas been developed, leading to a new algorithm for ground estimation, a number of segmentation methods as well as a full comparison of various decision values for an object based classification. The ground estimation algorithm developed has yielded good results compared to the method based on active contours previously elaborated at FOI. The computational effort needed by the new method has been greatly reduced compared to the former, as performance, particularly in urban areas, has been improved.