This thesis includes a description of the project flow for our projects at Semcon. The emphasis is on designing a manual for elMaster Concept.The project flow provides several minor and major elements plotting schedules for this project and the establishment of a manual. When a schedule is drawn, lists and tables with Components and connections can be created. This is done to better manage drawings and make changes. These diagrams and tables are used in product manufacturing, testings, controls.

In this report you can get a complete instruction about how to build your own development system for the PIC-processor. This card will be used for laborations for the students at LITH-ITN. With this card you can send new assembler codes (new instructions) down to the microprocessor via the Serialport on your computer. Then the new instructions for the microprocessor will start to execute. We made a solder paste stencil at Campus Norrköping solder paste stencil laboratory.

Dione kullager AB is a company in Uppsala, which sell industrialmachineComponents, transmissionsolutions and provides repair serviceof hydraulic Components.When a hydraulic cylinder is about tobe repaired it needs to bedisassembled. Because hydrauliccylinders usually work in dirtyenvironments and are heavilyworn some types of cylinders arealmost impossible to disassemble.Today the disassemble is made by hand,which means extra work for themechanics. In order to facilitate thedismantling of this type of cylindersa machine is to be developed for thispurpose and this is where this thesisbegins.The thesis has been organized in threephases: Literature study in whichfacts and theories are acquired.Concept generation in which differentconcepts, calculations, and solutionswere identified and selected. Thedesign phase where all the differentconcepts of Components were assembledand simulated in SolidWorks. Similarstructures have also been studied inorder to identify necessary functions.The thesis resulted in a structurewhich is believed to meet therequirements.

This thesis has been written at Linköping University for the company Instrument Control Sweden AB (ICS).ICS is a small company located in Linköping that develops software and hardware for Unmanned Aerial Vehicles, UAV. At present, ICS has a fully functional autopilot called EasyPilot but they want to reduce the autopilot?s size to make it more attractive.The purpose of this thesis was to investigate if it was possible to reduce the size of the autopilot and how, in that case, it would be done. It was also necessary to examine whether the old processors should be replaced by new ones and how hard it would be to convert the old software to these new processors.To succeed with the goals many of the old Components had to be changed for new, smaller ones. Some less necessary parts were also completely removed.

To create a profitable and competitive business an important factor today is a well-functioning logistics. Through effective internal material flows effective logistics can be achieved. Unnecessary handling and movement of materials is a waste which affects the internal material flow. These wastes should be identified and eliminated as much as possible to improve the internal materials handling and through that achieve a more efficient business. At Fagerhults Belysning AB, where professional lighting systems are developed, manufactured and marketed, a new inventory has been built and changes in the assembly has been made during the past year.

Either if you are a company or a state owned organization, in our case Sodertorn University collage, it is very highly demanded and needed that there is a well-defined definition of the area you perform in. It is also highly recommended that you have an accurate and informal profile of the type of company you are and that you have an effective communication to your surroundings, so that they can perceive it the way the company wishes mediate the message. In this essay we have tried to explain the kind of profile Sodertorn University collage has, and how its current students perceive this profiling strategy.Sodertorn University collage profiles itself through three significant areas: the school claim themselves to be multicultural, multiscientific in an aspect when it comes to courses and programs, and as a school with an ambition to educate and form more critical thinking students. This has become Sodertorn University collages trademark and is quite significant for the school, something that we have examined in our survey among the current students. What we will examine in our essay will only be the two first mentioned Components, multicultural and multiscientific programs and courses.We have also had the intention to do a comparison with an earlier essay from 1997 made by two economics students, and put our results in contrast to the earlier results since there were no previous research after this one.

During the last years the need for real-time database services has increased due to the growing number of data-intensive applications needing to enforce real-time constraints. The COMponent-based Embedded real-Time database (COMET) is a real-time database developed to meet these demands. COMET is developed using the AspeCtual COmponent-based Real-time system Development (ACCORD) design method, and consists of a number of Components and aspects, which can be composed into a number of different configurations depending on system demands, e.g., Quality of Service (QoS) management can be used in unpredictable environments. In embedded systems with requirementson high up-time it may not be possible to temporarily shut down the system for reconfiguration. Instead it is desirable to enable dynamic reconfiguration of the system, exchanging Components during run-time.

 The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.

The purpose of this study was to investigate what view of humans that emerges when priests/reverends talk about man in relation to baptism. The study consists of qualitative interviews with four priests/reverends. There were two representatives from the church of Sweden, and two from the Pentecostal church. The aim and questions in the study focus on what view of humans that emerges. Will there be similarities and differences in the view of humans, and is it possible to refer the result to the respective church.

This report describes the construction and development of a control box, which is a tool for testing and verifying a certain model of Rapid?s built in staplers (model A6102). Basically the function of the control box is to interpret any errors that may occur in the stapler and to make it possible to test fire the stapler.The control box should be able to communicate with the stapler using a specialized communication protocol. The different data such as errors, firmware etc. from the stapler is presented in plain language on a display.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The Components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

Purpose: The purpose of this thesis is to identify and analyze innovative products and services within the telecom industry, letting these findings constitute possible ways for CSPs to innovate the experience of their customers. Methodology: The research in this thesis was conducted from a qualitative approach and data were collected using primary- (expert interviews) and secondary sources (journals, articles, web sites etcetera). In addition, a research design entailing four sequential steps was created to stipulate and illustrate the logic underpinning the methodological process. Theoretical perspectives: The theories are divided in three groups. Background theories ? these intend to capture the problematic nature of the transforming telecom industry, examples of such theories are; value chain theories and ecosystem theory.

Forecasting is an important part in attempting to predict how companies will perform in the future. The more accurate the prediction, the more valuable are the results obtained from the forecast. This thesis aims to investigate forecasts of return on equity, and whether a disaggregation of the leverage formula into its underlying Components affects the forecasting ability positively. This is conducted by comparing a model based on the leverage formula's Components with a model solely based on return on equity from previous years. The study includes manufacturing companies on the Swedish Stock Exchange over the period 1998-2011.

The purpose of this thesis is to investigate the fatigue life of two Components in different hydraulic quick couplings. The crack which initiates the fatigue failure usually occurs in the bottom of one of the threads. Thus, the threads in the coupling are carefully investigated. A few different approaches for determining the fatigue life are studied for each component. CAD (Computer Aided Design) models for both Components are created and analyzed with FEM (Finite Element Method).

The overall purpose of this essay is to come to a deeper understanding about videos in the Youtube beauty community by using a mixture of qualitative and quantitative methods. By answering the main questions of the essay which are; What quantitatively measurable Components are there in the videos that can be seen as contributing factors leading to the fact that some generate more views that others?; Is there a set mold for success containing certain aspects that a video must have to stand out?; What correlations can be found between the two categories of analysis and how do these potential correlations affect the popularity of the video? and What effects do specific Components on the level of popularity of the video?, we?ve been able to distinguish differences as well as similarities on both qualitative and quantitative levels. We have also seen that using the two methods together have enabled us to reach more profound results. The main result that we have found on a quantitative level is that there are obvious correlations between a high level of popularity and a good visual quality.