Arbetet som presenteras i den här rapporten handlar om ansiktsigenkänning från webbkameror med hjälp av principal component analysis samt artificiella neurala nätverk av typen feedforward. Arbetet förbättrar tekniken med hjälp av filterbaserade metoder som bland annat används inom ansiktsdetektering. Dessa filter bygger på att skicka med redundant data av delregioner av ansiktet..

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

Swedish healthcare systems have endured harsh criticism from healthcare professionals because of their inability to understand healthcare processes. These systems have been identified as significant time consumers, and Swedish healthcare is therefore facing a major challenge to assure patient safety. The following paper is based on a workplace study, which aims to examine healthcare systems? impact on physicians? practices. Our findings show that physicians spend substantial amounts of time chasing information, rather than managing information and pursuing healthcare.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

Globaliseringen innebär ökad konkurrens för företag vilket gör det viktigare för företag att snabbt kunna utföra sina kostnadsuppskattningar. I detta arbete undersöks förutsättningarna för att använda moderna teorier inom cost engineering för att kunna förkorta ledtiderna vid förkalkylsarbetet för företag inom custom made-tillverkning. Inom cost engineering har teorier för kostnadsuppskattning används för att beräkna tillverkningstider för tre olika produkter hos ett fallföretag. För att få en bra beskrivning av problematiken med kostnadsuppskattning inom custom made-tillverkning har design science-metodologi använts under arbetets gång.  Resultatet av arbetet visar att förutsättningarna för att använda moderna teorier inom cost engineering för kostnadsuppskattning hos custom made-tillverkande företag är att historisk data avseende för- och efterkalkylsarbete finns tillgänglig.

This thesis studies the negative impact that control signal saturation may have on a controlled system. Different methods that are used to compensate for this problem are also studied and evaluated. Both sensitivity to disturbances and the effect the method has on the systems'ability to follow a reference signal will be examined. Stability will be discussed, but no conclusions whether the systems are stabilized or not can be drawn. Control signal saturation will lead to a slower behavior in general.

Denna uppsats har som syfte att klargöra hur långt det är tillåtet att med reverse engineering experimentera med en patentskyddad uppfinning innan patentintrång föreligger. Främst förs en diskussion om hur långt det är tillåtet att experimenteramed en patentskyddad uppfinning, utifrån patentlagens experimentundantag, utan att kränka ensamrätten som patentet ger. För att svara på denna fråga börjar diskussionen ur ett svenskt perspektiv i den svenska patentlagen, med ett instick ilagen om skydd för företagshemligheter. Diskussionen förs sedan ut i Europa för att se hur bedömningen av reverse engineering och experimentundantaget gjorts där och till sist vänds blicken mot USA. Bedömningen som görs är att reverse engineering ges ganska fria händer så länge målet för processen är att finna ny kunskap utöver den kunskap som finns inbäddat i patentet.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

Sweden will, in accordance with the EU-directive 2003/54/EC, move from post-regulating the electricity power grid-tariffs by using a fictitious grid, to a regulation in advance which uses the actual power grid as a starting point. For this purpose a component breakdown of the grid needs to be made to determine the value of the network and by that the tariff price that is reasonable for the network business in question to charge.The primary breakdown criteria is the voltage-level and type of region. Voltage-level is crucial for the cost and complexity of a grid-part, because the higher the voltagelevel is, there are more and stricter laws and rules to follow. This work is limited to the distributionpart of the grid, in other words voltage levels from 20 kV and below.The type of region is crucial to the type of components you can and want to use. In city environments both overhead-wires and independent substations are undesirable for both practical, safety and aesthetic reasons.

How does the weather protection systems look like today, and how will they be developed in the future? These are questions that we have worked with during this project. At the start of our report there?s a summary of the leading weather protection manufacturers in Sweden. We have explained how these systems are constructed and how they work.

This study investigates whether the permanent measurement bias (PMB) has changed over time for Swedish companies listed on the Stockholm Stock exchange at least one year during 1996-2000 or 2005-2010. By using the Residual Income Valuation-model the markets' implicit value on PMB is generated through reversed engineering, as values for all variables except PMB are entered such as the market perceived them at the specific valuation date each year. This implicit value is classified into industries and then sorted by their median. Statistical tests are performed to see if there is a difference between the industry median and the accounting-based values on PMB. The difference from period one to period two is also statistically tested for.The study finds that the implicit values on PMB have changed somewhat between the periods; however the fluctuations are not statistically significant.

In this study a case study was conducted at the Transport Agency. The government agency is seeking better alternatives to its current ways of keeping track of important dates stated in legal documents. The agency wants to explore the possibility for an IT-solution for keeping track on those dates. In the case study change analysis was conducted on the vehicle type approval process. Qualitative interviews were conducted with a section manager, vehicle type and component approvers, and with a system administrator and a system manager at the Transport Agency in Borlänge.

This report covers a description of the military support attainable to society and made available by the Swedish Armed Forces, in the event of a crisis. The main focal point is the needs of the rescue services..

The aim of this dissertation is to examine and compare William Easterly?s and PGU?s (Shared Responsibility: Sweden's Policy for Global Development) different views on development and international development cooperation. The methodological approach chosen in this study is an analysis of ideas based on the following questions:1. Which principles should be applied to development and international development cooperation?2.

Master thesis for Mechanical engineering, at the University of Lund. Incorporated in project Pondora.The purpose of this master thesis is to compare the existing one way packaging system with a proposed return crate system not yet available in Sweden. The comparison is focused on packaging handling in the grocery store.The purpose is also to investigate how operating return crate systems in Norway and Finland function, identify, the problems they have encountered and survey economic and technical aspects. The knowledge we hereby have acquired was subjectively evaluated in the thesis.The Swedish survey has a focus on meat and bread. The surveys in Finland and Norway contain all the products utilizing the studied return crate systems.We have surveyed how the handling of transport packages for meat & provision and bread is done in the store.