The object under investigation in this Master?s thesis is students? information use in connection to Bachelor thesis writing. The purpose of the study is to increase understanding of why nursing students and product engineering design students are using information in such different ways despite their comparable starting point. The empirical material consists of 18 student theses and a document comprising directives for thesis writing that are analysed from three different theoretical perspectives. A citation analysis of all 18 theses is carried out.

The aim of this qualitative study was to give an deeper understanding of how employees in the engineering industry experienced health education and how they understood and gave meaning to the terms health and health education. The study was based on interviews with eight men and women who participated in a health education project which had been held on their workplace. When the study took place the interviewees were in the age between 28 and 58 years. The results indicate that the employees understood health as a combination of both physical and psychological factors. The positive aspects described by the interviewees based on their experiences from the project were increase physical activities and that the project had helped them to get a better diet.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

This report is the final part within our education, Industrial Organization and Economy focusing on Logistics and Management at Jönköping School of Engineering. The aim with this report is to coordinate recycle drives for deposited aluminum-cans and bottles collected from grocery stores within Jönköping county and locality.In the present situation both aluminum cans and bottles filled with drinks are distributed to the grocery stores by the brewery?s own distributers. At the same time as they supply the drinks they also discharge the grocery stores units with restored aluminumcans and bottles. To make it easier for the grocery stores to handle the goods in the future, all distribution of drinks ought to be directly delivered to the grocery stores own separate central warehouse.

The objective of this thesis is to make a training material for KSU, which shows how radiation affects the different electronic components in a radiological environment.All electronic systems in the presence of high ionizing radiation can experience difficulties and be destroyed.This influence may compromise the control system and thus the safety of a nuclear reactor plant.To achieve this objective requires a description of electronic components and sensors, to better understand its function.This thesis will also show the possible solutions available that the author found interesting.Organizations such as NASA, CERN and ESA have worked to develop electronic components immune to radiation. Those organizations have also developed a test protocol that guarantees to a certain extent the security of electronic components in a radiological environment.Since we know how the material reacts with the radiation, it could develop a material that can be resistant to radiation or like CMOS technology has proposed, to reduce the component to avoid the storage of charge in the oxide.Another solution can be the GRAPHENE. Its features will revolutionize the electronics and provide answer to the radiation problems, Graphene will replace Silicium and the electronic components will only have a few nanometers dimensions so the oxide area also reduces, and in this way avoid the known problem of storage of charge..

As organizations are generating more business intelligence in their systems, more employees need access those systems. As a result some sort of permission management needs to be implemented to ensure the information remain safe. Access Control Matrix (ACM) is one way of managing permissions and is widely used among organizations. The issues that comes with ACM is that the matrix itself gets difficult to manage and overview as its complexity increases with the number of permissions. The study utilizes Action Design Research to develop a tool for visualizing permissions.

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.

Background: Due to outsourcing, the material flows in the telecom equipment industry have undergone major changes, which in turn has imposed new challenges for packaging supplier Nefab who delivers to the industry. In order to achieve market intelligence, Nefab wants to map the material flows, and investigate possibilities of further reusable logistical packaging systems.Purpose: The purpose of this thesis is to describe the typical features of the logistical material flows in a technically based, rapidly growing industry, and analyze the driving forces and obstacles, which influence the selection of logistical packaging system. Procedure: After developing a theoretical framework consisting of general logistical theories and theories related to logistical packaging, we have interviewed companies in the logistics channel of Ericsson Radio Systems.Results: We have found the main characteristics of material flows in our investigated industry to be Variations in Demand, Focus on Time-to-Customer, and Globalization of Logistics Channels. Regarding driving forces and obstacles in the selection of logistical packaging systems, we have identified Transportation Characteristics, Customer Demands, Quality, Handling & Administration, and Current Packaging System as important factors..

Problem: What are the characteristics of Polykemi?s management control system and how is it affected by growth? Purpose: To describe and analyse the management control system of a medium-sized family-owned company from the perspective of Simons? Levers of control. Research design: An abductive, interview-based case study of Polykemi AB. Conclusion: Polykemi?s management control system is primarily a traditional one which is rather strong in terms of Levers of control.

During the last decade, there has been an increase in the use of technology-based self-services within the retail sector. The increase is particularly noticeable within the grocery market. The reason behind the increased use of these systems is partially due to the fact that companies within highly competitive retail markets continually look for ways of decreasing costs while upholding efficiency. The problem is that it is difficult to understand the true economical implications of investments relating to these machines. The purpose of this study is to investigate and contribute with new insights regarding the cost-structures of the stationary self-checkout systems and traditional cashier desks, within the retail grocery market.

The management of information is a significant competitiveness in companies. Companies stored and save information every day, and it is very common to save de information in different sources. This makes de management of information complex. To mange, monitor and analyze the information, companies can use a system called Business Intelligence. BI system is an analytical system that extracts and converts data into useful information that helps employees to make informed decisions.

The aim of this thesis is to investigate the opportunities of classification of web pages. Two classification systems are compared; a library classification system traditional and a system that is developed for use on the web new. UDC is chosen to represent the traditional systems, and Yahoo! represents a so called new system. UDC is used by NISS Directory of networked resources, which is a directory that uses the system for organisation of electronic resources. Both systems are analysed from two different perspectives, a multidisciplinary and a timeperspective.

Denna rapport undersöker krav, tagna från ett ramverk för evaluering av CASE-verktyg i ett kontextuellt sammanhang, i två representativa CASE-verktyg. Ramverket utnyttjar en modell som föreslagits av Lundell och Lings för att extrahera både krav och förväntningar som en organisation (www.it.volvo.com) hade på vad ett CASE-verktyg är och kan utföra.Ramverket extraherar krav i ett organisationell kontext, dvs. utvärderingen utfördes innan verktyget som evaluerades användes i organisationen. Detta indikerar på att kraven inte är knutna till ett specifikt verktyg, samt att CASE-verktyg inte säkert stödjer dessa krav.Resultatet för denna rapport är att viss semantisk förlust uppstod vid transformering av kod och modeller..

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

This report is regarding an electrical installation of an alarm system on a post fishingboat called Andromeda. The background of the installation was an earlier andinadequate alarm system that led to a motor failure. The ship was taken out of serviceand was sold to Björn Magndahl who rebuilt it to a yacht.The project was conducted partly by developing the existing systems, partly bydocumenting the work by means of electrical blue prints. Except the alarm systems, aninstallation of the frequency control unit for the bow thruster was installed.The installation was working fine and the outcome of the documentation was handedover in a form of a binder during the test drive of the systems and the assignment wasapproved..