The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The aim of this work is to give a broader and more nuanced picture of the use of locks and keys during the Iron Age, in particular the late Iron Age, in the Lake Mälaren region. This has been done by comparing two buildings: the hall on Helgö and the living quarters in the garrison on Birka. Here we can see two very different areas where locks and keys were important parts of the daily life. The study also includes a typology of padlocks based on the findings from the same places as the building study and their surroundings..

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This master thesis is a study of a new electronic library reference service-project called Speak instantly to a librarian and the purpose of the thesis is to investigate a new electronic reference service and how the librarians who work with it experience it. This should be seen from an informational society point of view. The study is conducted from two questions: - What needs do the libraries have and how do they argue for the project and the chat-reference service Speak instantly to a librarian? - How do the librarians experience the personal work situation in the new reference service, and its use of chat technology? Together with interviews of a selected group of librarians from the public libraries of Göteborg, Malmö, Nacka and Stockholm, this thesis includes aspects such as the theory of the informational society by Manuel Castells, as well as literary studies of the history of library reference, the development of electronic reference service and the virtual library, and the background and the beginning of the studied project Speak instantly to a librarian. The thesis also contains an overlook of other similar library projects in the United States of America.

The purpose of this essay is to examine cost-benefit-analysis as a method of evaluation of labour market policy. To illustrate the possibilities and difficulties of the method chapter four contains a partial cost-benefit-analysis of the results of a labour market project in Kävlinge. The questions this essay strives to answer are the following: What possibilities and difficulties do cost-benefit-analyses entail? How would one conduct a cost-benefit-analysis of the project in Kävlinge?The method used in this essay is mainly a literature study of cost-benefit-analysis of labour market programs. The labour market project Brännpunkt is used as an example in a partial cost-benefit-analysis.The applied cost-benefit-analysis of the Brännpunkt project in Kävlinge shows that it is possible to calculate the profit for the society as a whole, given that the necessary information is obtainable.

This study aimed to investigate whether lambs show anticipatory behaviours in a holding pen prior to entering a known arena, whether the holding pen experience prior to the arena exposure affects their play expression in the arena and whether their behaviour (in home pen) is affected if arena access is denied. Twenty pair-housed male lambs (average 14 weeks old), were exposed, in chronological order, to five treatments. Holding pen treat-ment (HP-control): Each pair was led into a holding pen (2.7 m2) and remained there for 5 minutes before returning to their home pen (6 m2). Holding pen ? arena treatment (HP-A): Each pair was led into a holding pen for 5 min and then was allowed access into the arena (22 m2, containing two hanging chains, one ball and one platform) for 15 min before re-turning to their home pen.

Costs of maintenance on combines are a subject of interest thus it constitute a large investment and cost for the individual farmer. Therefore it is important to have up to date knowledge and the right facts to be able to do reliable calculations on one of the largest investments for a farmer. The aim of this study was to compare costs of maintenance on combine/threshingmachine with the computer program for advising environmental issues in agriculture, STANK. Interviews took place and data were collected by handing out questionnaires to 20 farmers. A similar study conducted by Neuman (2003) investigated costs of maintenance and compared these with STANK. The results of this study have also been compared and examined related to data from SLA - Skogs och Lantarbetsgivarförbundet. The result shows that 18 out of 20 combines were given a higher cost of maintenance when using STANK compared to the numbers in this study.

This bachelor thesis delves into the role and impact of cultural dimensions, identity and leadership on post-merger acquisition in Sweden through an in-depth analysis of two companies that have undergone acquisitions or mergers. Using an abductive method, where theories are continuously adapted based on empirical data, qualitative information was gathered through semi-structured interviews with managers and employees from the two companies. The study aimed to gather well-founded insights on how corporate cultural dimensions, identity and leadership are experienced by individuals during the merger. By examining culture, leadership and identity in three different time phases of the integrationprocess, a comprehensive understanding of the integration process was achieved. The results of the study highlight that cultural factors such as leadership, culture, and identity play a central and crucial role in mergers and acquisitions. By considering and managing employees' and leaders' identities, organizations can create a sense of coherence and continuity despite changes.

Previous research indicates that the academic journal in many cases is the most valuable and important source of information in scientific work. The aim of this study is to investigate students usage of academic journals in comparison to their usage of other document types, as illustrated by the citations given in LIS students master theses 1999-2001. By comparing the students use of LIS journals with the use of LIS journals by international scholars we also wish to examine whether students and scholars use the same journals in their work. The international scholars are represented by references given in LIS journals 1999-2001, recorded by the citation index Journal Citation Reports. Questions: 1.

Today we keep our horses in a way that is easy for us humans but may not always be the most optimal way for the horse. Often the housing of the horse prevents the horse from performing behaviours that they have natural needs to perform. It is not unusual that animals that can not adapt to their environment develop abnormal behaviours. Many of our stabled horses therefore develop some kind of stereotypic behaviour. This study was made in purpose of comparing the behaviour of a weaving horse to two non-weaving horses under similar conditions, where one of the horses was stabled next to the weaving horse and the other horse was stabled further away in the same stable. Seven weaving horses were included in the study.

This is a study of Sensus Barnmusikskola ? Children?s School of Music, in Karlstad, Sweden?s attempts to facilitate integration and diversity in their operation. The Culture and Recreation Management in Karlstad town?s conditions to award the school their grant in 2009 was that Sensus Children?s school of Music should make targeted interventions in the socioeconomic exposed areas Gruvlyckan/Våxnäs and Kronoparken to increase the number of children with foreign background. This would according to the Culture and Recreation Management bring more integration and diversity in to the school?s operation.

The work was carried out on Termisk Systemteknisk?s office in Linköping. The aim was to create a computer system with infrared camera technology for quality control and temperature monitoring of manufacturing processes in industry. The system should be configurable such that it can be used on several different issues, including those where the real-time analysis of camera images is required.The developed system is based on an existing framework, Panola, to deal with measurement results and images in a database. The framework is built for the system continually check for new data , and the task was to create a foundation upon which to build systems that use the framework, but fully or partially utilize direct calls .

The purpose of this thesis was to develop and optimize a method of analysis for combustion of organic chemical products, followed by an ion chromatographic quantitative analysis. This was to be achieved with the decomposition equipment IKA AOD 1. The aim was to receive a precise and repeatable method that would be able to be applied to the process of qualification and technical marking of chemical products at the company, OKG AB in Oskarshamn. A complete instruction for the decomposition equipment and the method of analysis was written. A number of parameters were chosen from the general method of the combustion equipment, which then was tested parallel with a simultaneous development of an appropriate ion chromatographic method.