The purpose of this thesis is to describe what Building Information Modeling, BIM, could mean for landscape architects, and also hopefully to make sense of the possibilities and problems of the system. BIM is about virtual design and is based on all consultancy groups in the design team modeling in 3D. Intelligent objects and metadata, such as price and material, are used. The project group has a common interchange format for simple sharing of information. To get an idea of how the situation with BIM for landscape architects looks like today, I collected information mostly through interviews.

The purpose of this thesis is to examine how two separate museums have realised the task of digitizing their collections, as well as to learn what options, possibilities and resources have been available to them during this process. Additionally, the aim here is to find how the two museums have dealt with problems in connection to the digitization projects, since there are as-of-yet no established regulations or standards to guide them in their digitization efforts. However, national and international working groups seeking to establish better collaboration between archives, libraries and museums ALM institutions have recently begun to formulate recommendations and suggested standards. Some of these recommendations have been used here as a theoretical framework in the examination of the two museums. The research questions posed are: What options, possibilities and resources have been available to the museums in their digitization projects, in terms of economy, staff, technical equipment and time?; For what purpose are the museums digitizing their collections?; and How does their purpose influence the process and chosen procedures? Also discussed here is how the museums relate to some of the existing recommendations.

Atlas Copco Tools develops and manufactures handheld industrial tools. Heat and surface treatments are used to provide the tools with certain properties. There are no routines for the choice of treatment or for how to specify treatment on drawings. Production documents that are sent for production abroad may not be clear enough. Some treatments are known as trademarks and there are no instructions for how to specify these on drawings and in CAD-models.The purpose of this master thesis work is to create recommendations for the procedure of choosing heat and surface treatment.

Examensarbetet har gått ut på att genom kvalitativa undersökningar ta reda på hur grafisk form ochinformationsstruktur samverkar för att skapa användarcentrerade webbplatser. Målet var att ta fram en grund för huranvändarcentrerade webbplatser bör byggas. Denna grund är tänkt att fungera som riktlinjer för formgivare som villskapa användarcentrerad webbdesign.Studien visar att det viktigaste för att skapa användarcentrerad webbdesign är att involvera användarna kontinuerligti utvecklingsprocessen. Detta sker genom användartester och intervjuer med representanter för målgruppen. Vi harkommit fram till att graden av användbarhet spelar stor roll för hur målgruppen uppfattar webbplatsen som sådan,men också vilken uppfattning de får om företaget bakom..

The aim of the project is to develop a tool for a management system at the advertising agency ofConfetti. The company has during a longer period of time felt a need of introducing a quality and environmentalsystem but have a lack in resources of knowledge, time and money. Their goal is to have aconcrete documentation which describes their quality policy and the function of the activity.The work has been performed by mapping and analyzing the processes of the company according tothe process model with focus on one pilot process. New routines have been developed and documentedin a management system.Confetti would like their management system to fulfil the ISO-standard so that they eventually inthe future can be certified. Therefore a literature study has been done according to management systemsand standards.

AbstractTitle: 2008- the year of the mobile-TV-markets expansion? (2008- ett år för mobil-tv-marknadens utbredning? Drivkrafter hinder och aktörer).Number of pages: 50Author: Hilda EngstrandTutor: Lowe HedmanCourse: Media and Communication Studies CPeriod: Fall Semester 2007University: Division of Media and Communication, Department of Information Science, Uppsala University.Purpose/Aim: The aim of this research paper is to identify the main operators on the mobile-tv-market and to map out the main forces behind its growth. What are the driving forces that creates a new disribution-market? Also to study how political media-regulation effect and urge the mobile-tv- market.Material/Method: Interviews with people from the mobile-tv-market. To read public-documents, press releases and reports from the government, media-companies and organisations has also been a method used to gain information.Main results: That the mobile-tv-markets growth is a result of several driving forces.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

AbstractConcrete foundation slabs are usually exposed to unilateral drying during the curing process. The unilateral drying causes an axial shrinkage and a concave curvature of the construction. The curvature results from the fact that the upper part of the slab is drying and shrinking faster than the lower part. This is called gradient shrinkage.A problem occurs when the slab is considered fully restrained by adjoining structural parts. The deformations caused by axial contraction due to the constant part of the shrinkage and the curvature caused by gradient shrinkage of the slab are then prevented by the fact that the slab is fully restrained.

 Agila metoder är en relativt ny ansats inom programvaruutvecklingsområdet och ses som en reaktion mot plandrivna metoder som har svårt att hantera oförutsägbara och skiftande krav. Agila metoder förespråkar nära och frekvent kundkommunikation och iterativt arbete för att ständigt kunna skapa, prioritera och verifiera krav. Dock uppmärksammar inte agila metoder aspekter som berör programvarans användbarhet. Syftet med rapporten är därför att integrera användarcentrerad design för att öka fokus mot programvarans användbarhet hos agila metoder. Användarcentrerad design är en process som fokuserar på användbarhet genom att användarna är en central aspekt i utvecklingsprocessen.

This report describes the process of outlining a design proposal for a resource planning tool for TV post-production. A feasibility study in form of a participant observation has been carried out on-site, which has resulted in a requirement specification. Based on the requirement specification, mockups have been created to illustrate the functions and features that a final planning tool should have. In addition to developing a design proposal, an evaluation of the existing resource planning tool Ganttic has been conducted. Ganttic has been reviewed based on how well it meets the list of requirements.

A woman is dying of cancer, she refuses to use her walking aid. Because she is embarrassed. This means she can?t leave her house, and her last days become very limited.Why do we act like this?Can the view we have of products adapted for disabled be changed by working with colour, texture, form and materials?There are many products adapted for disabled, the products often have a good function and well developed ergonomic aspects but the visual aspect leaves a lot to wish for. There is neither effort nor money put in to the exterior design of most of these products.A lot of the solutions that are invented for adapted products can be used in design of ?regular? products.Why should we then divide products in to adapted and non-adapted.

Concurrently with higher demands on comparability between companies, all Swedish listed parent companies are guilty to apply international accounting standards, IFRS/IAS, no later than January 1, 2005. In this thesis IFRS 7 Financial instruments: Disclosures, that treats information about financial instruments, is investigated. IFRS 7 aims to establish a good international standard for disclosures about financial instruments. The purpose of this thesis is to study differences in the interpretation of IFRS 7 Financial instruments: Disclosures between Swedish life insurance companies, problems ? if any ? that associate with the recommendation, the recommendation?s effect on accounting and the attitudes towards IFRS amongst the Swedish life insurance companies.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

The web sites of Swedish public libraries display a high level of heterogeneity when it comes to design and graphical user interface. The thesis is based on the opinion that the visuals of a public library web site have implications for the user as well as for the library. The design of the graphical user interface influences the attention of the user and his/her ability to absorb information. Furthermore, there is a connection between the visuals and the users opinion about the credibility of the content of the web site, as well as of the organisation itself. The research question is: Which factors may have an impact on the design of the graphical user interfaces of a public library web site? The purpose is to create an understanding for these factors and emphasize them.

År 2004, införde Sverige revisionsstandarden RS, Revision i Sverige, vilket grundade sig i det dåvarande ISA (International Standards on Auditing) som gavs ut av det internationella revisorsorganet IFAC, International Federation of Accountants. Från om med den 1 januari 2011 införde Sverige tillämpningen av den internationella revisionsstandarden ISA (International Standards on Auditing) fullt ut. Denna standard innebär en del förändringar som måste införas i revisionen. Vi har i denna studie främst fokuserat på de förändringar som skett i revisionsberättelsen.  Dessa förändringar innebär att revisionsberättelsen fått ett annorlunda utseende och att revisorernas term, ?hög men inte absolut säkerhet?, ersatts med termen ?rimlig säkerhet?.