The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.

The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.

This thesis for the Master of Science degree was performed at Solectron Corporation in Norrköping. The background for the thesis was a need to develop and build two test fixtures to automatize testing and adjusting of transmitter modules (TX-fixture) and receiver modules (RX-fixture) which are head devices in DWDM-systems. The basic elements for the test fixtures are: Test board, switch board and DC/DC board. The main function of the test board is to handle communication between the transmitter and receiver modules and supply voltage to these modules. The test board was insufficient and modified with a microprocessor to handle the communication between the PC and the receiver module.

Introduction: This thesis is about how the accounting entry provisions are linked to corporate market value. By statistically examining accounting and share data for 56 companies listed on NASDAQ OMX Stockholm, the question of whether accounting information regarding provisions are value relevant for investors is studied. Listed companies shall follow the rules of IAS 37 ? Provisions, Contingent liabilities and Contingent assets, when preparing financial statements.Aim: The purpose of this thesis is to examine the relationship between reported information about provisions and investors assessment of listed companies that comply with IFRS-regulations, by statistically testing the value relevance of the accounting entry.Method: The study is based on a quantitative, deductive methodological approach. The value relevance of provisions is examined by statistically testing the collected empirical data based on the two models that is described in the reference frame.Results: The conclusion to be drawn from the study is that reported provisions have no statistically significant association with return on shares and thus is not value relevant.

This study in Environmental Science examines the amendment of the EU-Directive on. Greenhouse gas emission allowance trading. The Directive is to be considered as a tool for fulfilling the obligations that the Union and its member countries have taken on through the 1997 Kyoto agreement together with the protocols proposed at that time. The flexible mechanisms of the protocol are intended as instruments for limiting the climatic changes arising from anthropogenic sources, emission allowance trading being one of these mechanisms. The results presented here consist primarily of an analysis of interviews with various experts in the field of emission control concerning the possibilities and problems attending the process of implementation.

Envirotainer builds containers that are specialized in transporting of temperaturesensitive products these containers are customized for airplanes. The containers arethen leased to other companies, most often to pharmaceutical companies.Envirotainer are based in Lagga, Knivsta. It is also here where the production of thecontainers is held. The container RAP T2 was designed in the early 80ies. The RAPT2 contains a fleet of about 1220 containers spread all over the world.

To assure good quality the software needs to be tested to find errors and to verify that the programme meets the customer?s expectations. Traditional methods are usually used in software development and means that a number of predetermined steps are followed. By using agile methods the development can more easily be adapted to the changes on the market. With these methods the testing is carried out continuously throughout the project.

The competitive nature of the automotive industry has always implied a necessity to improve product development concerning time-to-market, cost and product quality. As capacity of computer-aided engineering (CAE) tools has evolved, so has the strive for simulation-driven design. Virtual durability testing using full vehicle models is one of many challenges posed in front of vehicle manufacturers when computer simulations are given a key role in product development.This thesis has been initiated as a preliminary step towards implementing dynamic virtual durability testing in the development of buses and coaches at Scania. The objective has been to assess the predictability of a full vehicle coach model and to what level of precision structural loads can be predicted. Previously performed proving ground testing of a Scania Touring coach has been the basis for the modelling and simulations in this thesis.A virtual model of the Scania Touring coach has been created in multi-body simulation software package MSC.Adams.

The purpose of this thesis is to investigate how Digital Signage systems such as public info kiosks can be designed to better fulfill its main use; to enlighten, encourage and influence the public with information. The challenges presented from earlier studies shows that the public interests and goals, together with proper and relevant content displayed in info kiosks have impact on the attention the public have towards public displays. Qualitative methods such as interviews, usability testing and observations were conducted to further examine how a public info kiosk can be designed to draw attention and grow interest amongst students at K3, Malmo University. Usability testing were used on the digital prototypes that were developed to ensure that the gestural user interface meet the requirements of a proper interaction from the users. Important insights were made concerning; the attention and interest to relevant content, the aspects of the gestural user interface along with the placement of the info kiosk in terms of context.

Salmonella in cats has been documented for many years. Infection with S. Typhimurium,which is often referred to as Songbird fever, is believed to be caused by birds whoinadvertently infect cats. The disease is often seen during the springtime when songbirdsreturn from their winter habitats, while other birds who have stayed during the winter are intheir weakest condition of health. In the spring of 1999 an epidemic of S.

Since Internet has become a more important and more certain source of information the user require greater and more demands than ever before on the layout and function of different web pages. When search engines gives us the opportunity to millions of hits in just a fraction of a second it?s essential to optimize the structure and architecture, which forms the foundations of all the content. In a time when a company?s digital footprint plays an important role for the costumer and the transmitter it?s of utmost importance to have a steady, well-structured foundation to build new platforms of information on.But how do you manage to build a good foundation? Some of the most important key elements in Information architecture are Organizing, Navigation, Search and Labeling.The aim of this study was to create guidelines for a user-friendlier interface, by analyzing the principals and gathered data.

The Functional Resonance Accident Model is a method developed to analyze complex systems for the purpose of accident prevention. In FRAM-analysis a visualization of the complex system is created as an aid for identifying points of interaction in the system where the risk of accidents is high, and to determine where preventive measures are to be placed. FRAM Visualizer is a computer program developed as a tool for creating such visualizations.Many usability problems have been identified in FRAM visualizations created both manually according to established method and by using the FRAM Visualizer software. The purpose of this paper is to give a basis for how FRAM visualizations can be improved in accordance with usability criteria for use in future qualitative studies.The author suggests alterations to the FRAM visualization to resolve usability issues identified in previous articles and to achieve usability goals derived from visual communication theory. The design process is guided by established design principles.

To support uniform and fair assessment of Swedish students? English language competences, mandatory National tests are provided both for secondary and upper secondary education. The current thesis may be seen as a contribution to the further development and validation of these tests, with regard to the likely introduction of computerized testing methods. The aim is to gain further knowledge from current research in the field, to study and elucidate international experiences of implementation, and to gather and analyze feedback from students and teachers. Based on my findings, some tentative conclusions will be drawn, and recommendations made concerning future developments.

Climate on earth is getting warmer, which effects earth?s energy balance and so forth the ocean and atmospheric circulation.  In many sub-polar regions on the northern hemisphere changes due to warming of the climate can be observed. Some examples that already have been observed are shifts in tree line, towards higher altitudes and latitudes, increased ablation of Swedish glaciers and melting of the permafrost on the Siberian tundra. In Sweden climate change scenarios tell us that it will become warmer and that a higher amount of precipitation in form of rain will be an effect from this. To study climate changes in Sweden, transition zones are useful in order to observe changes in distribution of species and animal populations.

In studies of serum, in the early 1930s, from patients with pneumonia, a factor was found. It could agglutinate certain pneumococcal species. This factor, which later became known as C-reactive protein (CRP), increased sharply during the early and middle stages of the disease. CRP was identified as an acute phase protein and found especially in bacterial infections. CRP is synthesized in the liver by stimulation of interleukin 6 (IL-6), which is produced by the monocytes, and consists of five non-covalently bound subunits.The aim of this study was to compare two different analytical instruments (Vitros 5.1 FS Ortho-Clinical Diagnostics and QuikRead CRP Orion Diagnostica) for CRP analysis.