This master thesis has been done at Enea Epact AB. The purpose of this thesis is to develop and implement a Link Quality Control algorithm for GPRS/EPGRS in the current testing tool. A Link Quality Control (LQC) shall take quality values from mobile stations and base stations and decide a codingsscheme that opimizes the throughput of data. The Advantage with LQC is that it adapts the used coding scheme to the channel quality. If the channel quality is too bad for the used coding scheme, a slower coding scheme with more redundancy should be selected.

Systemutveckling har på senare år rört sig mot allt mer flexibla metoder för att bedriva utveckling, ett agilt förhållningssätt vid systemutveckling i dagens IT-bolag är inte alls ovanligt. I takt med förändring av tillvägagångssättet har även ett moment inom testningen fått allt mer fokus: Testautomatisering. Vissa författare hävdar till och med att det inte går att bedriva agil systemutveckling utan att införa testautomatisering. Syftet med uppsatsen är därför att undersöka vilka utmaningar en testare inom de agila metoderna stöter på vid testautomatisering. Detta utförs med hjälp av intervjuer på fem olika företag av fem olika testare där de alla har en gemensam nämnare, att de jobbar agilt..

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

The purpose of this study was to investigate the possibility of streamlining the test process by utilizing pair programming. During the process, pair programming has been practiced as is defined by the Extreme programming (XP) software development methodology, with the other aspects of XP discarded. The focus of the testing itself has been toward unit testing. The methods applied has been with an experimental approach where 93 cases were attempted to be solved by either single programmers or pair programmers. What has been investigated in these experiments was the time needed to complete a case, how many test attempts were needed to solve the case, and how high a percentage of the cases were solved.

The objective of this study was to assess validity and reliability for five different owner-completed instruments evaluated to assess chronic musculoskeletal pain in cats. All of the instruments were questionnaires, three asking about behavioral changes, one about the degree of pain and one about quality of life. One of the instruments was written originally in Swedish, the other four instruments were translated into Swedish before use. Data available were records from 57 cats with no signs of pain and 11 cats with different pain-related diagnoses. The diagnoses were ensured by clinical examination including palpation and manipulation of joints, gait testing on a force-plate and X-ray scans. Instrument 1 was completed by 57 pain-free and 11 pain-affected cats.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.

Most often when developing a new system there is a need get a functioning testtool up and running. Including time, cost and resources the solution isn?t always obvious, developing your own or buy one ?of the shelf?. The purpose of this thesis is to study how a general testtool for executing functional tests should be designed to be reusable, be based on recognized knowledge and be able to fast and simple be customized for different types of systems. Key functions from the litterature is presented and used in the design of a testtool prototype.

Objective: The study will investigate whether cash liquidity have a negative affect on profitability and share value of companies, listed on Nasdaq OMX Stockholm 2008-2011. Part of the purpose is also to show if the industry risk is of importance for treasury management of these companies.Method: The methodology for the study is key analysis through hypothesis testing and regression analysisConclusion: The liquidity ratio affects profitability in a negative direction on the entire sample. No other conclusion can be drawn..

Today the competition in the automobile industry is getting all tougher. The technology behind cars becomes more advanced. To get ahead of competitors car companies has to look into new areas of innovation.One important area is vehicle safety. Bigger companies have come so far in vehicle safety that difference between cars more depends on the car type (size) than the technology behind it.There is one area where vehicle safety that still has great opportunities for improvement, which is in active safety. The term active safety states that the car has the ability to identify treats and automatically respond to the treats.

In this project I have worked with creating a new kind of room in a hospital enviroment for children. The main purpose of the project has been to form a secure and positive experience for the patient while visiting a specific room at the department of childrens physiologi, at Drottning Silvias Children- and youth hospital in Gothenburg.The project was based on questions like how it is possible to move the focus from the unsecure and scary, to something secure and positive, when the patient is going through an testing situation.The target gruop included a wide age span (0-16 years old), therefore I have worked with a theme, H2O, that works for diffrent ages. In the room, I have applicated the theme in different levels that is changeable depending on the age of the patient.During the project I have presented my ideas for the staff at the hospital. We have discussed their problems, what they wish in their working enviroment and how they experience the situation for the patients. I have also asked the patients how they experience the specific room today.The result of the project is a visual idea of how you can create a room, that you don?t exepect to find in a hospital..

Construction of an autonomous wind station was a project with the goal of creating a product that could collect wind data from a sensor and then transfer this data to a server wirelessly over the GSM network. The device would be powered by batteries and solar cells and function fully without requiring external power supply. This required that a small computer was constructed and programmed to store and send data at predetermined cycle times and programming of a server that received the sent data. The project also required optimization of power consumption and dimensioning of solar cells and batteries based on this. The construction of this station demanded research both for the selection of hardware and programming software. The computer was based on a microcontroller and a GSM module that sent the data over the 2G network.

In recent years, employees at large companies have started to demand that their employer should work more for good causes. The money the company wants to donate to charity is distributed mostly through a vote to decide where the money will be remitted. The purpose of this design case is to develop a design concept for a web-based donation service that involves all employees at a company. Furthermore, the authors of this study intends to explore how the motivation for employees of a company can be affected by participation in this service. In this design case, the service function, quality and concept was tested and evaluated.

Värmekollektor in Sunne is a company whose main occupation is to collect the gas produced inlandfills. The gas contains about 50 % of Methane which is a greenhouse gas 20 times worse than CO2and should therefore not be allowed to leak into the atmosphere. The Methane is in as large amount aspossible used in different plants for example heating of households. But there are occasions when aflare is needed to burn the excess gas at standstills or testing of new landfills. The Flare only burns themethane to reduce the hazarder?s effect of the environment, it does not take advantage of the energy inthe gasThe goal of this master thesis was for me to create a foundation for an in-house production offlares for Värmekollektor.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.