Ericsson AB in Katrineholm is a part of the Section Business Unit Network in the Ericsson Group. The plant's main task is to produce printed circuit boards in small volumes with a high product mix and focus on delivery and cost effectiveness. At the factory they produce printed circuit boards in the Module department.The Module department has for a long time had a high output of non-approved circuit boards in their production. This has led to a growing stock of non-approved circuit boards on the company?s repair department.The purpose of this thesis is to investigate how Ericsson in Katrineholm can increase the outflow of approved articles in their test process in the Module department.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

The objective of this thesis was to develop a method for the planning of road upgrading at Holmen Skog, a Swedish forest company. A critical issue for creating such plans is to identify roads that are suitable to upgrade to a standard that can handle heavy traffic during spring thaw, since spring thaw is a bottle neck for transporting timber. The method was tested in a case study at a district. The work consisted of two parts. The first was to retrieve and prepare geographical data for the roads.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.

This paper is a literature study on search engine optimization (SEO) considering the leader of the search engine market: Google. There´s an introductory background description of Google and its methods of  crawling the Internet and indexing the web pages, along with a brief review of the famous PageRank algorithm. The purpose of this paper is to describe the major important methods for improved rankings on Google´s result lists. These methods could be categorized as on-page methods tied to the website to be optimized or off-page methods that are external to the website such as link development. Furthermore the most common unethical methods are described, known as ?black hat?, which is the secondary purpose of the text.

The purpose of this degree project was to build laboratory equipment for a new course in power electronics that starts this autumn 2010 at Uppsala University. The equipment is intended for student labs and it covers the most important areas of the course including rectifying, buck-/boost-converters and PWM-modulation. It is built as one sealed unit where all the electronics are built-in but visible and it has a connection board where students safely can connect the different circuits. The project has advanced from theoretical studies of circuit design, choosing of components and simulations to drawing the printed circuit board (PCB), soldering, case building, final testing and troubleshooting - basically most steps from an early idea to a final product. Measurements on the final product gave about the same results as the earlier simulations of the circuits and the result is overall satisfying..

Today?s environmental discussions have led to more progress in the different transportareas. To ride a bicycle is often one of the most efficient alternative when it comes totransport. An Electric bike is, and makes transportation more efficient than a regularbicycle. Electric bicycles do not affect the environment significantly and allows moreconvenient transportation than ordinary bicycles do.

NorFor is a cooperative project between the consulting organisations owned by the farmers in the Nordic countries ? Sweden, Norway, Denmark and Iceland. The project started in 2001 and the outcome, the system for ration calculation NorFor Plan and the model for evaluating the ration NorFor Evaluation, was completed in 2006. Along with NorFor Plan economical optimization are available and according to literature, the optimization will generate a 2 öre lower feed cost per kg milk, and thereby improve the profit for the farmer. The use of NorFor Plan in Sweden for feed optimization during spring 2008 has been very small. In this study eight herds in the middle of Sweden fed half the herd according to the classical system used in Sweden and the other half according to NorFor Plan system.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.

Gunsta is situated about 10 km east of Uppsala. Today there are plans to establish 1000 new households in Gunsta before year 2030. The required energy for heating houses and water would be distributed via a district heating system, which also includes 200 existing residences. The annual required energy, according to this study, would be 16.2 GWh with a maximal peak effect of 6.9 MW. To meet this need, the study suggests a system with heat pumps to upgrade the 31?C water from a 1.8 kilometre deep borehole.

This paper investigates the possibilities to construct automatized portfolios based on optimizations strategies that could outperform comparable indexes. The study is based on time-series of Swedish stocks dating from 1986 to 2006. In the research four different portfolio optimization techniques were studied. These were: the Classical Markowitz Approach, Mean-Absolute-Deviation, Minimum-Regret and Conditional Value-at-Risk of which the three latter are based on generated scenarios. The behaviour of these models was studied for different choices of parameters such as backward time-horizon and targeted average return.

This master thesis covers the seasonal planning of a small scale hydropower system. The system in this study is owned and operated by Mälarenergi Vattenkraft AB. The total system consists of 4 different main rivers with 24 hydropower stations and several dams. The total installed power in the system is 43.75 MW. Most of the hydropower stations are regarded as small scale hydropower stations and thus entitled to green certificates.In this report the issue of planning is formulated as an optimization problem.