The construction industry has not undergone the same logistical development as the manufacturing industry; this, in combination with increased material price, leads to the fact that the construction industry must be improved. This master thesis is a part of the research cooperation Brains & Bricks goal of reducing production costs for the construction sector by 25 percent. Brains & Bricks is a cooperation between Linköping University, Peab and Katrineholms municipality. The master thesis aims to identify improvements in the flow of material, the Supply chain operation reference, SCOR, model has been used and the work has been carried out on one of Peab?s construction sites. At present the business is characterized by bad communication both between the construction site and the office as well as between the construction site and suppliers.

This master thesis is an early concept development project about using plastic films and sheets as materials for shaping openings for Tetra Pak packages. It is also a technical introduction highlighting the areas of importance for the development of plastic film and sheets openings. The master thesis has been carried out as a co-operation between Chalmers University of Technology, KTH Royal Institute of Technology and Tetra Pak AB.The master thesis study presents an introduction that gives an understanding of the technical complexities and design possibilities of using thin plastic films and sheets in liquid carton openings. The knowledge is then transferred into five design concepts which points out the areas of opportunity. The technical introduction is widespread and extensive covering current packing trends, the liquid carton package and openings, thermoplastic material properties, and thin film and sheet manufacturing and shaping.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.

This bachelor essay is divided into two parts, the first being a construction of a single-familyhouse and the second an in-depth study of five different isolation materials, analysed from anenergy perspective.The first part, the construction of the single-family house, has been created from knowledgeacquired during three years of studying at KTH Royal institute of Technology in Stockholm, inthe program Architecture and the Built Environment. The constructed house is a one-floorhouse of 137m2with façade plaster, situated in Borlänge, Sweden. The house has a wooden framewhich is built on a on sight cast concrete foundation, on the ground. The house?s roof is a gableroof, which has an angle of 24 degrees.

Abstract: Title: Communication of and around internal performance reports - A study in seven manufacturing companies based in Blekinge. Authors: Marcus Harrysson and Mikael Johansson. Supervisors: Lars Svensson and Carina Svensson, Blekinge Institute of Technology Department: Department of Business Administration. Course: Bachelor thesis in Business Administration, 10 credits Purpose: Our purpose with the bachelor thesis was to investigate if there is a connection between communication of and around internal performance reports and profitability in companies. Method: Our investigation has been made at seven companies in the county of Blekinge by making personal interviews with people in both production and business departments at each of the companies. Result: We have come to the conclusion that there is a connection between communication of and around internal performance reports and profitability. Sammanfattning Titel: Kommunikation av och runt interna ekonomiska rapporter ? En studie i sju tillverkande Blekingeföretag. Författare: Marcus Harrysson och Mikael Johansson. Handledare: Lars Svensson och Carina Svensson, Blekinge Tekniska Högskola. Institution: Institutionen för Ekonomi och Management Kurs: Kandidatarbete i företagsekonomi, 10 poäng Syfte: Syftet med kandidatuppsatsen är att undersöka om det finns ett samband mellan kommunikation av och runt interna ekonomiska rapporter och lönsamhet. Metod: Vår undersökning har gjorts i sju stycken Blekingeföretag genom personliga intervjuer med representanter för både ekonomi- och produktionsavdelningen på varje företag. Slutsats: Av vår undersökning drar vi slutsatsen att det finns ett samband mellan kommunikation av och runt interna ekonomiska rapporter och lönsamhet i företag..

Title AB Volvo Pentas packaging system ?process and packaging logisticsAuthor Peter Powell, Lund's Technical CollegeSupervisors Annika Olsson, Lund's Technical CollegeJan Svensson, AB Volvo PentaProblem - Packaging requirements ? Which requirements are there, how do they affect each other and how are they fulfilled?- Packaging process ? what is the line of action when developing new packaging and making adjustments in existing ones? Who has the responsibility to do what?- Packaging logistics ? How is the packaging system adapted to transport efficiency and handling?Objective To create an overall picture over how the packaging system affects and is affected by different functions and players within and beyond the company boundaries, to give a clear picture of how changes in the packaging system is made today and how it could work and finally to give suggestions for cost savings affected by the packaging system.Method The methods used for this thesis has mainly consisted of action research and at some extent case studies. As a previous employee at the department of logistics at Volvo Penta I?ve taken part of the environment, information and prerequisites that this thesis discusses on a daily basis. Case studies have been used for the collection and analysis of data concerning packaging logistics as I?ve chosen to consider only specific markets and packaging.Conclusions This thesis has highlighted the demands that are placed upon engine packaging throughout all concerned units and how these demands affect each other, positively and negatively.

Laser for material processing possesses a number of advantages which mean that it has been and will be an important component for a wide range of industries' future development. Cutting materials processing is the dominant use of laser technology and has revolutionized the manufacturing industry. The aim of this thesis is to describe the principles of metal cutting by laser, how laser cutting is applied in practice and to identify how Swedish companies are using laser cutting. For the theoretical and technical description of laser cutting literature studies are the primary source of information. The empirical basis for the mapping of the Swedish industry for laser cutting is grounded on a survey; this includes Swedish companies that use laser cutting in their production.

This master?s thesis was performed during the fall of 2006 at Cloetta Fazer AB in Ljungsbro. Cloetta Fazer is the market leader in Scandinavia of manufacturing confectionary and chocolates. The purpose of the project has been to identify causes that impact the quantity of waste in production as well as a cost/benefit analysis of the solutions that can reduce the problem of production waste.The work includes four production lines that are individually designed depending on what kind of product that are produced on the line. By using qualitative and quantitative methods such as focus groups, interviews and observations data has been collected.

Södra Cell Mörrum is one of the five paper pulp plants that are included in Södra Cell, and the paper pulp that is produced here is not only sold to Swedish paper mills. Most of the paper pulp is exported to different countries in Europe. In the manufacturing process the plant needs different kind of process water and there are guideline values for how much copper, iron and sodium this water is allowed to contain. Analyzes of this water is in the current situation done with an atomic absorption spectrometric instrument (AAS-instrument) with a flame. Measurements done with flame-AAS of samples that have concentrations near the guideline values for copper, iron and sodium, are not reliable. The reason for not being reliable is that the quantitation limits of these metals are higher than the limit values.

Slöseri är ett stort problem på byggarbetsplatser. Ett koncept där minimering av slöseri ärcentralt är Lean-manufacturing. Detta arbetes syfte var att utreda hur förbättringsarbeteanvänds på byggarbetsplatser. De befintliga systemen för förbättringar analyserades ochförslag till förbättringar gavs.Genom intervjuer undersöktes hur förbättringsarbete sker på byggarbetsplatser.Egenkontroller och arbetsberedningar användes som kvalitetsarbete på arbetsplatserna. Detvisade sig att de inte har något system för förbättringsarbete.

Företag världen över har valt att implementera produktionsfilosofin Lean och de förknippade verktygen. Flertalet av verktygen är utformade för att uppnå en hög kontroll av produktionsflöden och en detaljerad pålitlig produktionsplanering. Verktygen har dock en utvecklingsgrund från den repetitiva produktionen, där höga volymer produceras av samma produkt med liten variation i bearbetningsprocesser. Det har lett till att dessa inte är beprövade för en mer variationsrik produktion, likt den i de flexibla funktionella verkstäderna. Vidare har det visats att just denna flexibla produktionstyp ter sig vara den mest konkurrenskraftiga för högkostnadsländer gentemot lågkostnadsländer vilket följaktligen påvisat att den icke repetitiva lågvolymsproduktionen utgör allt mer av produktionen i högkostnadsländer.

The purpose of this thesis was to study how an internationalization process to China may appear for a small Swedish enterprise and to identify important factors that may be essential for the process. The focus extends from the point where the enterprise makes its first connection with China up to the point where they are well established. Their business is up and running and they have begun production. To gain a deeper understanding of the subject a gathering of existing theory and research articles was conducted. The gathering of theory yielded knowledge of different approaches and methods that can be used to implement internationalization and provided a greater understanding of cultural and regional differences in China compared to Sweden.

I detta examensarbete har möjligheten att kvalitetssäkra en monteringsbana vid Parker Hannifin Manufacturing Sweden AB:s anläggning i Trollhättan utretts. Syftet med studien var att förbättra kvalitetssäkringen vid Fasta Motorers F11-montering och arbetet baserades på en tidigare utarbetad felläges- och effektanalys. För att styrka kundperspektivet genomfördes en undersökning av vad kunderna reklamerar, i form av PQP-anmälningar samt NCMR-rapporter.Genom att därefter identifiera kritiska monteringsmoment i felläges- och effektanalysen, PQP-anmälningar och NCMR-rapporter, var en prioritering möjlig att utföra. Prioriteringen resulterade i att feltyperna felvridet lagerhus, felplock av material samt kuggfel ansågs vara de mest kritiska att kvalitetssäkra.Målet med arbetet var att reducera det totala risktalsvärdet, vilket var möjligt genom en konceptgenerering samt ett konceptval för de specifika prioriteringarna. I samband med konceptgenereringen undersöktes, genom intervjuer med berörd personal, specifika kundbehov.

This case study is based on a previous documented method of manufacturing artificial nest containing pre-colored hen eggs. This method is going to be used to find, if the wild boar population, which is growing in number, is a threat to the capercaillie population.  In comparison to the wild boar population, the capercaillie population is diminishing in different parts of Sweden.  In order to find out if they are affect by each other, the case study was carried out during the months of April to May 2009. 100 artificial nests were placed out on various locations on the Södertuna estate just in the outskirts of Gnesta. The unique aspect of this study is that a fenced environment to keep out wild animals is used to conduct this study, which has been previously known to be free from wild boar, but the area outside has sittings of wild boar. So to fully understand how this affects the capercaillie population, 50 of the nests were placed outside the fence area, while the other 50 nests were placed inside the fenced area. The sites were visited on two separate occasions, and were noted of the changes inside and outside the fenced compounds.

This thesis was conducted at Linköping University and Saab Aerostructures DPS, Linköping, and focuses on the possibilities of flexible fixturing in machining applications. The thesis is part of the research project "Koofix", which is collaboration between Linköping University and a number of companies.The thesis is aimed towards small batch production which, for Saab Aerostructures DPS, means diverse part geometry and that parts are manufactured in very small numbers, sometimes just one piece. The result of this is that expensive dedicated fixtures are made for most parts. By introducing more flexible fixturing methods to this kind of production the cost of fixtures and tooling will be reduced, and make the production more efficient.New flexible fixturing methods has been presented and evaluated through the thesis, which has resulted in three different concepts. These concepts have been the result of literature screening and study of current manufacturing process at Saab Aerostructures DPS.