When managing the quality of a service producing industry?s products, the industry faces greater challenges than the manufacturing industries do. Today?s globalization puts further pressure on service producing companies around the world to work at their absolute maximum. So, how do service producing companies work to manage quality? In this essay the writers take a deeper look at the travel agency Ving, part of My Travel Northern Europe.

This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.

The aim of this study is to elucidate the process in which psychology was separated from philosophy and established itself as a distinct academic discipline in Sweden. I argue that the concept of will, as well as the concepts of thinking and emotion, have a lot to tell us about the rise of academic psychology in Sweden. This is done through an analysis of psychology textbooks, encyclopaedia-articles and academic texts on the themes will and psychology, from around 1800 till 1950.Prior to the establishment of the first chair of psychology in Uppsala 1948, the discipline was above all a part of the philosophical discipline. For psychology to become a science of its own, it was crucial to obtain a position among the empirical sciences. It thus had to distance itself from philosophy, and in particular from metaphysics.

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

This report deals with issues related to construction waste. Building material that has not been built into the project is defined as construction waste. Cost of construction waste amounts to 4-12 % of the total cost of the project. Moreover, cost of construction waste is 1-3 % of the production cost. The aim of this study is to increase knowledge about the main causes of waste within the construction industry.

Nowadays naval units are participating in international missions, where new and in many cases tougher conditions will affect their propulsion. This essay deals with some of the now developed nanostructure coatings and gives a presentation of how the coatings could function on some exposed parts of the naval powertrain. The essay investigates the possibility that the coatings can be used as a protective layer that will reduce or prevent wear on selected parts of the naval powertrains. As a basis for the essay, nanotechnology is described, as well as different reasons that wear occurs and application techniques for coatings The conclusion is that nanostructured coatings can be applied and provide a much better result on hardness and wear resistance as of naval powertrains compared to micro-structural coatings, both for manufacturing and renovation. The essay presents a few examples of the military utility of the nanostructure coatings as well as suggestions for further research..

Examensarbetet genomfördes åt företaget Corus Byggsystem AB. Ett företag placerat i Halmstad som tillverkar profilplåt och lättbalk till tak och fasader. Företaget erbjuder även god rådgivning och skapar optimala lösningar för kunden.I företagets produktion finns det en maskin som pressar specialbalkar. Denna arbetsplats är varken produktionseffektiv eller ergonomiskt riktig då materialet och balkarna lyftes manuellt, i vissa fall även över huvudet. På tunga arbetsplatser är det oerhört viktigt att se över ergonomin, både för att förbättra säkerheten och för att öka produktionsvolymen.

This report covers the product development of a new type of extendable table for the company Karl Andersson och Söner. The company wants to expand their product collection with a new product. Karl Andersson och Söner is a well-known family company that has been located in Huskvarna since 1898, and they are producing furniture for private- and the public environment.The aim with this project is that the product should lead to increased sales, as well as expand their collection to appeal a wider audience. The work is permeated by two issues, to achieve as good results as possible. The issues will bring up how to make a table better, in terms of the competitor?s options, and how to apply a design process to develop a table that meets the markets needs and requirements.The design process of the work consists of strategically picked parts from three separate design processes.

The manufactory industry, due to decline in profit margins, is seeking new business opportunities by moving towards servitization and value-adding services in after-sales. We have therefore conducted a case study to investigate a manufacturing company in their current transformation towards servitization. By studying the management perspective, we aimed to understand how Information Technology, by adding value, could play a role in the transformation process. This study shows that information technology can take an integrating role, by supporting new value-adding services to provider and customer, as well as a co-creating role, where both provider and customer benefits by learning from each other, in the changing work process initiated by new services. The study has also shown that Information Technology, together with organization, information and people, are crucial components in the manufactory industry?s transformation towards servitization.  Furthermore, the study has also shown that the value chain has the potential to drastically change due to the value-adding that the information technology brings to the progress of servitization..

This is a thesis performed at GEMS PET Systems AB in Uppsala. GEMS PET Systems AB is a company within GE Healthcare. GEMS PET Systems develops and manufactures equipment for manufacturing of radioactive isotopes for PET which is a scanner used in medical applications. The systems includes an accelerator of cyclotron type and other support equipment. One system is shipped in two or three containers depending on order configuration.

Allt fler tillverkningsföretag utmanas idag att tillgodose kundorderstyrd produktion med en hög grad av kundanpassning för att svara mot kundernas efterfrågan på marknaden. Detta kan generera stora variationer i bearbetningstider mellan olika produkter som, i samband med långa bearbetningstider, medför längre genomloppstider och sänkning av den genomsnittliga utleveranstakten. Vid kundorderstyrd produktion är det viktigt att identifiera begränsningar och balansera flödet för att uppnå högt resursutnyttjande och hög leveransservice. PartAB är ett tillverkande företag av prefabricerade badrumsmoduler. Produktionen är kundorderstyrd produktion med hög grad av kundanpassning, där bearbetningstiderna är långa och har stor variation.

This degree project is a realization of a strategy for collaboration between an industrial designer and employed workmen of a producing company. The collaboration aims to engage everyone involved in the co-authorship of a products design and manufacturing history. The realization has taken place in an open dialogue where the designer no longer owns the design process by himself. The project has been carried out in cooperation with the company Iris Hantverk. The company is owned by the Swedish body for visually impaired and has their main production facility in Stockholm.

This study will chart the changeover work, with a standpoint in the SMED-theory, at the company Peter Ernst AB in Värnamo. They are suppliers in plastic moulding industry and delivers to amongst other Saab in Trollhättan and Scania. The company are in a very competitive market, and they have to make manufacturing more efficient and rationalise their costs to be able to compete. A big problem, which the company has identified, is their long changeovers. It brings higher costs, a more stressful work climate and holds back the company from becoming more efficient.Field studies will be conducted on the changeover, which will be observed and filmed.

The problems caused by the current engine casing in aluminum for Volvo Buses Corp. are the mainfoundation for this degree project. Lack of maintenance combined with a construction poorlyadjusted for assembly has resulted in the fact that the engine casings rarely get reassembled whenthe service is completed.The degree project has mainly been following ?Olssons. F, Principkonstruktion, Compendium, Lund?and ?Olssons.