In this project a LC-MS-method for the analysis of gamma-hydroxybutyrate, gamma-butyrolactone, 1,4-butanediol, amphetamine and methadone was developed.Initially, the efficiency of the ionisation of the analytes was evaluated with respect to the ionisation technique (ESI, APCI and APPI) and the composition of the mobile phase. In the next step a number of different columns was tested in order to find the one with the greatest potential for separation of the substances in question. Using the selected column, the separation was optimised by means of experimental design and the software The Unscrambler 7.8. The parameters studied were the flow rate, the column temperature and the mobile phase composition. The response variables were the resolution between the target compounds and the retention time of the last eluting compound.These experiments showed that, in order to obtain the best ionisation, the mobile phase should consist of 5 mM formic acid in water and acetonitrile.

This thesis has been performed as a part of the Bachelor degree in Industrial Engineering and Management at the School of Engineering in Jönköping. The thesis is written on behalf of Pallco AB, which is an engineering company that performs subcontracting, surface treatment, and assembly of components, mainly in steel and aluminium. The thesis focuses on identifying and analyzing the customer order fulfillment process of three customers at Pallco AB.The main objective of the thesis is to distinguish time differences in the company?s administrative work for each of the three customers. Furthermore, Lean thinking is following as a thread through the whole thesis.

Värdebaserad styrning utgörs av en samling principer, vilka ska ge en vägledning för att mäta prestationer, allokera resurser samt sätta finansiella mål. Detta görs utifrån den grundläggande förutsättningen att aktieägarvärde skapas när avkastningen överstiger investerarens kapitalkostnad. För att lyckas med implementeringen och den fortsatta tillämpningen av VBM anser vi att företaget bör följa nio steg. Först bör företagsledningen förmedla synsättet, värdebaserad styrning. Därefter bör företaget välja en effektiv styrmodell.

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

Problem: Trots att betalkort funnits länge i samhället, så används idag kontanter fortfarande i stor utsträckning. Handhavandet av kontanter innebär höga kostnader, dels på grund av extraarbetet det innebär för butiker att räkna pengar varje dag, dels för bankpersonal som ska sköta insättningar och uttag och dels för kostnader till vaktbolag som sköter penningtransporter. Om man vet varför kontanter fortfarande används till så stor utsträckning och till vad, så kan man rikta in sina insatser på var man ska öka betalkortsanvändningen. Avgränsningar: Fokus i denna uppsats är på samtliga svenska konsumenter som har rättighet att få ha betalkort från en bank. Syfte: Syftet med denna uppsats är att undersöka om produktegenskaper såsom pris och kvalité påverkar valet om att betala med kort eller kontant.

It is a common view that companies should focus on building brands to increase profitability and stabilize Cash flows. However, building and keeping brands alive is costly. Many firms spend large sums on branding only because they are supposed to, without knowing if they will actually gain from it. Up to date, there is limited convincing evidence that branding actually contributes to shareholder value creation. This thesis aims to investigate the relationship between brand strength and profitability and shareholder value.

AbstractAim: The purpose of this thesis is to research how women think about fashion in relation to their self and to others. Can clothes be an expression of who we are who we want to be and how we look at others? What are the main characteristics in this type of communication and what kind of information can be distributed using this tool?Method/Material: InterviewsMain results: Clothes can work as a tool to show who we are and what we are, mainly on short term. We use clothes for different purposes, sometimes we what to be seen and really show who we are and what we stand for and sometimes we just what to go with the flow and not be seen at all. We will always have a physical need for clothes but it is also a natural and important part of our individual expression and our identity.Keywords: Fashion, Clothes, Identity, Lifestyle.

Forest enterprises have always searched for ways to improve efficiency. For the past few years there has been an emphasis on stock-keeping levels. Increased demand for fresh round timber and the need to decrease the amount of tied-up capital has made the forest industry reduce its inventory levels. This has brought on a higher demand on the timber supply from the forest management districts concerning both delivery in time and assortment output. As a result, the flow of timber has fluctuated a lot with serious consequence for the timber supply during 1994.

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

Internet and information technology today has a rather obvious role in the activities of companies and organizations. All cash transactions within and between companies is digitized, communication within the company is done via e-mail, sales and marketing is done largely with marketing and ads on the Internet. This has resulted in economic benefits for companies and organizations, and facilitated the work for them. However, this has also led to new threats have emerged. Companies and organizations is well aware that there are numerous threats that comes with using the Internet and Information Technologies but exactly what those threats are for a mid-sized company in Sweden is not clarified anywhere.

Year 1996 a new law was introduced in Sweden, the law of corporate restructuring, what purpose was to help companies in financial distress. Now, nine years later the procedure hasn?t been successful. This is what this thesis is trying to find out.This thesis main question is: What distinguishes the companies that have filed for a corporate restructuring, according to the financial position?The purpose of this thesis is to find out if key ratios can be used to distinguish the companies that filed for corporate restructuring.

This case study is performed within the production of Sherwin-Williams, Bellö. The purpose is to increase the understanding how a value stream can function more efficient, from a lead time perspective. With the analytical model that is build up on known theories, the purpose have been fulfilled. Mapping of value and non value time for four products thru their respectively process reveals wastes, which is, waiting, transport and movement, incorrect processing and set-up time that in it self create transport and movement. Thru identified wastes that causes loss in lead time suggestions of improvement has been proposed.

Att beskriva en byggnad som tidlös är bland det finaste en kan säga. Några av världens mest uppskattade byggnader har beskriv- its som just det, tidlösa. Hur kommer det sig att en av den finaste komplimangen och erkännandet en byggnad kan få, egentligen är intetsägande? Tiden går ständigt och det finns ingenting någon kan göra för att ändra det. Människor, djur och även byggnader utvecklas och åldras.

The purpose of this thesis was to describe how service producing IT- companies handles their internal marketing. We wanted to understand how management deal with internal marketing activities and how different companies create a working environment to encourage employees to motivation and well-being. To be able to find out we did a case study on a service producing IT-company. Two personal interviews were done with two of the managers. Our empirical research showed that the company used internal marketing on a daily basis.

Due to increasing product availability and higher demands on fast deliveries, the competition between companies is growing. To be able to satisfy the customers? requests an efficient logistics system with short throughput time is required. By using tools associated with Lean production companies are able to make great improvements in their manufacturing systems and reduce lead times to satisfy customer demands.There are two classifications associated with manufacturing, high variety and low volume (HVLV) and low volume and high variety (LVHV). The general belief is that the concept of Lean production is difficult to implement in a production environment with high variety and low volume due to the concept being adapted to mass production.