This paper deals with the opportunities for the technique of condensation, for wood fired household heaters, on the Swedish market. In this project the condenser is preceded by a scrubber and both energy exchange and separation of unburnt particles have been studied. The facility studied is connected to a wood stove at 30 kW. The tests would show that the effect from the stove never reached above 16 kW. This might be a result of the low temperature of the water going into the stove, from the condenser. In addition to this the wood was not of highest quality and the stove could have needed some maintenance before the tests.

Steel is an excellent material to build with, but consideration must be given to the fact that unprotected steel corrodes, rusts, therefore, as a rule, the steel must be protected in some way. This can be done by reducing the tendency of the steel to corrode by using stainless steel or by treating the steel with a protection method. The two most common methods of protection are corrosion protection paint and zinc coating. To determine the method, the corrosive category must first be evaluated and this is done in accordance to EN ISO 12944-2:1998.Stainless steel is available in many varieties but only some of them have properties that make them suitable for use as construction steels. There are many factors to be considered in the design of stainless steel to prevent corrosion from occurring.

This study in Environmental Science examines the amendment of the EU-Directive on. Greenhouse gas emission allowance trading. The Directive is to be considered as a tool for fulfilling the obligations that the Union and its member countries have taken on through the 1997 Kyoto agreement together with the protocols proposed at that time. The flexible mechanisms of the protocol are intended as instruments for limiting the climatic changes arising from anthropogenic sources, emission allowance trading being one of these mechanisms. The results presented here consist primarily of an analysis of interviews with various experts in the field of emission control concerning the possibilities and problems attending the process of implementation.

This thesis aims to illustrate how environmental impact can be reduced, through the use of lean concrete. It also illustrates how environmental data can be applied to a house through implementation with BIM. In this study a unique concrete structure developed by Swedish Cement and Concrete Research Institute is assessed for environmental impact, by calculating the carbon dioxide equivalents using LCA methodology. The construction is a sandwich element where the concrete is made ??up of three layers.

Many of todays studies show that district heating is one of the betteralternatives as heating source because of its low environmental load.The energy source is often leftovers from other processes producing energy or waste, like garbage or chips.Electricity in combination with geothermal heating is another heating system that has increased sharply during the last years, and also this system decreases the discharges that have negative affectson the environment compared to several other heating methods.This report aims to, concentrated towards these two different heating systems, estimate the amounts of discharges they indirect cause and how the environment is affected.We have calculated the mean value for discharges of carbon dioxide, nitrogen oxide, sulphur oxide and dust generated from electrical power used in Sweden.Through interviews and research we have gained data for the same substances that district heating based on combustion of garbage and biofuel generates.We have also in cooperation with a housing company chosen a building we see representative for many of the new single-family houses built in Sweden today.Based on its shape and appearance we theoretically created three alternatives of the same house, each of them with climate screens different from each other.Together with the amounts of discharged environmental affecting substances, these houses were the base for our calculations and studies when investigating the different heating sources environmental effect.The results have thereafter been analyzed and discussed from different angles..

This project was aimed to study the degradation of polystyrene-butadiene-styrene block copolymer (SBS). SBS is used to modify bitumen, the binder in asphalt. From earlier studies it is known that SBS degrades in bitumen, but the degradation products have not been identified. To be able to determine the long term effects of SBS in the environment, degradation products need to be identified. Polystyrene forms rigid blocks with polybutadiene as a rubbery matrix between the ridgid blocks.

Detta examensarbete har utförts på uppdrag av Koenigsegg Automotive AB, som utvecklar, tillverkar och säljer högpresterande sportbilar. Företaget erbjuder fälgar tillverkade helt i kolfiberkomposit, som ger betydande viktbesparingar i jämförelse med traditionella metallfälgar.Efter tillverkningen kräver fälgarna viss bearbetning vid anläggningsytan mellan fälg och däck. Syftet med examensarbetet har varit att undersöka möjligheten att utföra bearbetningen av fälgarna in-house i Ängelholm, och målet har varit att konstruera en maskin för detta ändamål.Projektet inleddes med en litteratursökning, där svårigheter och möjligheter gällande bearbetning av kolfiberkompositer undersöktes. Till följd av de undersökningar som gjordes, valdes bearbetningsmetoden svarvfräsning och ett antal konstuktionskoncept genererades. Genom ett antal utvärderingar utvecklades ett speciellt koncept vidare till ett komplett produktförslag.Produktförslaget är komplett med analyser, beräkningar samt tillverkningsunderlag, som ger uppdragsgivaren bättre insikt i sina möjligheter.

Odling av mikroalger för framställning av biogas är ett relativt outforskat område. Den forskning som hittills utförts har påvisat lovande resultat tack vare möjligheten att utnyttja resurser som idag går till spillo, eller till och med utgör miljöproblem; mikroalgerna kan rena både näringsrikt vatten (exv. avloppsvatten) och koldioxidutsläpp (rökgaser från industrin) då de tar upp föreningar innehållande kväve, fosfor och kol från dessa källor. Den producerade biogasen kan ersätta fossila bränslen. Dessutom skapas en rötrest som kan återföras till odlingsmarker vilket sluter näringskretsloppet.

 Title:Transshipment Terminal ? A study of environmental effects from the introduction of a transshipment terminal and a route planning system in the municipality of Kalmar Examiner:Andersson, PetraKey words:Transshipment terminal, route planning, environmental impact Purpose:The study aims to examine how a transshipment terminal and a route planning system may have implications for the municipality of Kalmar from environmental concerns. Methodology:The thesis is a case study on the municipality of Kalmar. A positivistic -and an objectivistic approach have been used. The strategic approach that was used was quantitative.

Large amounts of phosphorus (P) are lost from the arable land due to water erosion. Both phosphorus attached to particles and dissolved phosphorus (mainly phosphate) are transported away with drainage-water and surface runoff. Good soil structure is important in minimizing these losses. In this study, soils from 50 fields were analysed with respect to aggregate stability as measured by dispersion of clay together with the content of total phosphorus (TotP), particulate phosphorus (PP) and phosphate phosphorus (PO4P) in the water phase. All soils were clay soils with clay content varying between 21 and 54%.

The ferry traffic to Gotland is essential for the island?s ability to live and develop. Yearly, it transports 1,6 million passengers, 500 000 personal vehicles and 750 000 lane meters of freight with four Ro-Pax ferries. The traffic is controlled and subsidized by the Swedish government since 1971 in order to guarantee the inhabitants and industry of Gotland a satisfactory transportation service. As a consequence of the past decades increased traffic quality, mainly due to a decrease in crossing times, the traffic?s environmental impact and costs has also increased.The Master Thesis proposes a new energy efficient traffic arrangement that satisfies the users? preferences in the same extent as today.

Sweden's government is dedicated to the goal of having a vehicle fleet that is independent of fossil fuels by 2030. Achieving these goals requires, among other things, new types of fuel that give lower net emissions of carbon dioxide. The present market includes stations offering lowlevel blends of renewable fuels in conventional diesel as well as some stations offering renewable fuels only. The purpose of this study is to survey purchasers? attitudes to the use renewable fuels in roundwood and bioenergy transport in forest- and energy companies. The study was based on qualitative interviews through a combination of face-to-face meetings and telephone interviews with each sample group. The total number of respondents was ten (10), consisting of five (5) from forest companies and five (5) from energy companies. Transport service purchasers were generally positive to renewable fuels and considered these necessary in the future.

This candidate thesis concerns the ?all but forgotten? material from the bronze age site named ?Raä 977, Hansbo 1:3, Vojmsjön, Vilhelmina?. During 1975-76, an archaeological dig was carried out by Västerbottens museum led by Ulla Walukiewich in an attempt to preserve the information the site held, before it was destroyed by the erosion brought on by the recently regulated sea ?Vojm? (Vojmsjön). The archaeological dig yielded a stunning amount of finds, samples and information previously unknown.

Pyrolys innebär att exempelvis biobränsle hettas upp i syrefattig miljö för att bilda pyrolysgas och kol. Pyrolysgasen kan brännas för att producera värme med låga utsläpp och kolet har en mängd användningsområden; jordförbättringsmedel, fodertillskott, filtermaterial, kolfastläggning, energibärare, ståltillverkning m.m. Om krav på bränsle och användningsområde för kolet uppfylls kan kolet certifieras som biokol. Syftet med den här rapporten är att utreda om pyrolystekniken är ett hållbart, tekniskt och ekonomiskt alternativ till pellets- och flisförbränning för värmeproduktion. Målet är att förmedla pyrolysens tekniska och ekonomiska förutsättningar, såväl positiva som negativa.

The aim in this thesis is to use carbon, nitrogen and sulfur isotope analysis on teeth and bone to track diet and mobility of the population as well as the individual level from the articulated and disarticulated individuals from the passage grave Frälsegården, situated in Gökhem parish in the region of Falbygden, western Sweden.50 human samples were analyzed from tooth, mandibula and femur, together with 11 faunal samples from different bone elements of local wild and domestic animals.The results fall well in line with earlier stable isotope work done on passage grave individuals from Falbygden in stable isotopes: A homogenous group with a diet which was clearly terrestrial and lived on a pretty high trophic level. It also seems that the analyzed individuals deliberately focused their food intake to the cultural and natural, megalith and limestone landscape of Falbygden, and not to its surroundings, even if the passage grave is situated in the outermost areas of the region.A small study compares the sulfur results to with earlier work done on strontium isotopes. The results show that the different methods might provide a deeper understanding in the interpretation of the methods, and therefore suggesting that further work should be done to compare the methods..