An environmental review has been carried out at FORIA AB, a transportation- and machine service company, to analyze the company?s environmental aspects from the transportation segment. This report describes the essential background and the methods of identifying and evaluate the environmental aspects. It also describes how the work with the environmental aspects often vary between different actors. The design of the ISO 14001 is intentionally broad in order to apply on all sorts of activities and organizations.

Klimatförändring är en fråga som under senare år har fått mer och mer medial uppmärksamhet och svenskarnas individuella miljömedvetenhet uppskattas vara högre än någonsin. Individen pekas ut som att ha ett stort ansvar, men trots klimatkampanjer så fortsätter svenskarnas kollektiva klimatpåverkan ändå att öka. Denna uppsats syftar till att genom diskursanalys undersöka hur klimatansvar, i termer av ansvar för klimatpåverkan och klimatanpassning framställs i två Svenska dagstidningar, Dagens Nyheter och Uppsala Nya Tidning.Svenskt klimatansvar visade sig vara konstruerat på ett tvetydigt sätt där samhällets gemensamma påverkan verkar vara förenad med brist på enskilt ansvar. Individen är den aktör som oftast utpekas som förväntad att ta ansvar för klimatanpassning samtidigt som detta inte på något sätt krävs. De synsätt som präglade klimatdiskursen var de för ekologisk modernisering där fortsatt konsumtionsökning, tillväxt och grön teknikutveckling förväntas ta Sverige ur klimatkrisen utan att större livsstil- eller strukturella förändringar behöver göras.

Problems with the current energy system, which partially relies on non-renewable fuels, are increasingly recognized. Emissions of greenhouse gases from fossil fuels may speed up global warming, which in turn leads to a number of negative consequences. Nuclear energy is risky and relies on consumption of a scarce resource. This leads to a demand of renewable energy that is also economically feasible. One possible renewable source of energy is solar energy.

An environmental review has been carried out at FORIA AB, a transportation- and machine service company, to analyze the company?s environmental aspects from the transportation segment. This report describes the essential background and the methods of identifying and evaluate the environmental aspects. It also describes how the work with the environmental aspects often vary between different actors. The design of the ISO 14001 is intentionally broad in order to apply on all sorts of activities and organizations.

A renewed application for environmental permit for the Hovgården landfill in Uppsala shall be submitted before December 2004, therefore the municipality of Uppsala needs improved knowledge of the contents, mostly organic compounds in the leachate and they also want to find a method to minimize the emissions of these compounds. The purpose of this study was to find a practical and economical method based on chemical oxidation using oxidants. The oxidants investigated are Fenton's reagent, hydrogen peroxide, Oxypro, potassium permanganate and potassium persulfate. The study was made on untreated leachate and leachate that has been treated in an aerated dam followed by sedimentation dams collected from the Hovgården landfill, and alson on sludge water from sludge storage cells. The effects of the five oxidants have been established by analysing the UV absorbance at the wavelengths 253,7 nm and 260,0 nm at different pH values. The UV absorbance was used to indicate the amount of aromatic hydrocarbons in the water. Also analyses of iron and manganese were done after the experiments with potassium permanganate, hydrogen peroxide and Fenton's reagent.

Organic material used for biogas production can also undergo other treatments. The emissions and impact from the different treatments are evaluated in this environmental assessment, with a focus on energy and climate. The materials included in the study are organic household waste, slaughterhouse waste and liquid manure. Other than biogas production, the possible treatments for organic household waste and slaughterhouse waste are incineration and composting, and for liquid manure storing and spreading. The analysis is based on data and information from current and relevant literature, and relates to the conditions in the Swedish energy system.

Steel is an excellent material to build with, but consideration must be given to the fact that unprotected steel corrodes, rusts, therefore, as a rule, the steel must be protected in some way. This can be done by reducing the tendency of the steel to corrode by using stainless steel or by treating the steel with a protection method. The two most common methods of protection are corrosion protection paint and zinc coating. To determine the method, the corrosive category must first be evaluated and this is done in accordance to EN ISO 12944-2:1998.Stainless steel is available in many varieties but only some of them have properties that make them suitable for use as construction steels. There are many factors to be considered in the design of stainless steel to prevent corrosion from occurring.

Perfluorinated substances (PF) are environmental pollutants that are used to coat fibres of so called ?all weather clothes? to make them water resistant. PF are effectively spread through water. Waste water treatment plants (WWTPs) are a pollutant source of these substances. PF are poisonous to different kinds of organisms, and supposedly also to human beings, if concentrations are sufficiently high.Perfluorinated substances have been investigated at three waste water treatment plants in Stockholm during the 2000?s.

This project was aimed to study the degradation of polystyrene-butadiene-styrene block copolymer (SBS). SBS is used to modify bitumen, the binder in asphalt. From earlier studies it is known that SBS degrades in bitumen, but the degradation products have not been identified. To be able to determine the long term effects of SBS in the environment, degradation products need to be identified. Polystyrene forms rigid blocks with polybutadiene as a rubbery matrix between the ridgid blocks.

Detta examensarbete har utförts på uppdrag av Koenigsegg Automotive AB, som utvecklar, tillverkar och säljer högpresterande sportbilar. Företaget erbjuder fälgar tillverkade helt i kolfiberkomposit, som ger betydande viktbesparingar i jämförelse med traditionella metallfälgar.Efter tillverkningen kräver fälgarna viss bearbetning vid anläggningsytan mellan fälg och däck. Syftet med examensarbetet har varit att undersöka möjligheten att utföra bearbetningen av fälgarna in-house i Ängelholm, och målet har varit att konstruera en maskin för detta ändamål.Projektet inleddes med en litteratursökning, där svårigheter och möjligheter gällande bearbetning av kolfiberkompositer undersöktes. Till följd av de undersökningar som gjordes, valdes bearbetningsmetoden svarvfräsning och ett antal konstuktionskoncept genererades. Genom ett antal utvärderingar utvecklades ett speciellt koncept vidare till ett komplett produktförslag.Produktförslaget är komplett med analyser, beräkningar samt tillverkningsunderlag, som ger uppdragsgivaren bättre insikt i sina möjligheter.

Sustainability and the role of companies in terms of emissions and environmental impact has become increasingly more relevant. In 2014, the EU decided to introduce the NFRD, a directive that makes it mandatory for companies that meet the requirements to report on sustainability. This thesis aims to examine how four large Swedish industrial companies report about sustainability in connection with the introduction of NFRD, looking at the years 2015 (2014), 2017 and 2022 from an environmental viewpoint. Furthermore, the study also intends to investigate how the companies write about their sustainability work, as actual achievements or what they have ambitions to do in the future. In order to carry out the study, a content analysis with elements of both qualitative and quantitative features has been used called the CONI method.

Soybean meal from South America is the most common protein feed used for animal production in Sweden. Production of soybean has negative effects on the environment and the transports from South America to Sweden causes considerable CO2 emissions. Therefore it is a growing interest in locally produced protein feed in Sweden. Protein feeds that are possible to grow in Sweden are rapeseed, peas, faba beans and lupins. Those are adapted to the Nordic climate and are perfect to grow in cereal rotations.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

The Swedish government has set up the overall goal that no net emissions of greenhouse gases can occur after 2050. A sub-target has been developed for road transports which states that the use of fossil fuels must be reduced with 80% to 2030 in order to be completely abolished to 2050. A public inquiry mapping how this can be achieved was handed in to the government late in 2013. The use of alternative fuels for road transport, both biofuels and electricity, is expected to give the biggest contribution to the reduction of the use of fossil fuels. The inquiry sets up a number of goals for how much the use of alternative fuels must increase to 2030 in order to reach the overall goal and which instruments that are needed in order to do so.The aim of this thesis is to evaluate how these goals can be reached and what the most likely obstacles that may hinder the reaching of these goals may be.

Large amounts of phosphorus (P) are lost from the arable land due to water erosion. Both phosphorus attached to particles and dissolved phosphorus (mainly phosphate) are transported away with drainage-water and surface runoff. Good soil structure is important in minimizing these losses. In this study, soils from 50 fields were analysed with respect to aggregate stability as measured by dispersion of clay together with the content of total phosphorus (TotP), particulate phosphorus (PP) and phosphate phosphorus (PO4P) in the water phase. All soils were clay soils with clay content varying between 21 and 54%.