Background: In the past 10 years private label has increased significantly in the Swedish grocery market. This is an important strategic event, which is a great challenge to suppliers as it causes stiff competition. To handle this situation an increasing number of suppliers have to make the decision whether to produce private label or not.Purpose: The purpose of this study is to find and analyse factors that influence suppliers in the Swedish grocery market to produce private label. On this basis we intend to confirm or develop existing theories within the field of study.Research method: The study has a qualitative approach where empirical data has been gathered through interviews with suppliers and retailers in the Swedish grocery market.Results: This study has identified factors that underlie suppliers? decision to produce private label.

Denna uppsats undersöker en medlemsorganisations roll och betydelse för utvecklingen av en klustermiljö, samt vilka möjligheter en sådan organisation har att förmedla vikten av sina insatser i och utanför ett nätverk. En kvalitativ metod har använts i form av intervjuer med personer inom den offentliga sektorn vars arbetsuppgifter berör näringslivet i Öresundsregionen. Dessutom ligger diskussioner med nyckelpersoner inom organisationen Medicon Valley Academy till grund för den empiriska studien. De teorier som används är: kluster, trippelhelix, regional innovationsteori, nätverk, organising capacity och Key Performance Indicators (KPI). Fem kommuner från den svenska och danska sidan av Öresund utgör tillsammans med Köpenhamns och Skånes motsvarigheter till landsting den insamlade empirin.

Abstract                ?Due diligence - A resource demanding process?Date:                     June 8th 2012Level:                    Master thesis in business economics, 15 ECTSInstitution:           School of Sustainable development of society and technology, Mälardalen UniversityAuthors:                Erdinc Kirik                                  Pär Matsson                               11th January 1987                      31th May 1985Title:                      Due diligence - A resource demanding processTutor:                     Staffan BoströmKeywords:             Due diligence, the acquisition process, acquisitions, business valuationResearchquestions:              What are the main factors that Bank X, Nordea and Almi is focused on an examination of a due diligence for an acquisition, focusing on private limited companies?Does the approach between the various banks and Almi differ?Purpose:                The purpose of this paper is to create a checklist for private limited companies to use in the context of application for fundingMethod:                 The study was based on a qualitative study, based on primary data in terms of interviews in the subject of due diligence. Secondary data used in the study consisted of relevant literature and scientific articles.Conclusion:            The study showed that the respondents in general focuses on the same areas within Due diligence. The most important point which the respondents agreed on was profitability and repayment capacity. In overall, all elements in a Due diligence process that has an impact on profitability is important to examine.

Shopping for groceries often means that, as consumers, we travel to the grocery store ourselves, by ear, bike or on foot. At the store we pick out the groceries that we want, go the register and pay for them. During the last couple of years consumers in Sweden have been given the opportunity to let someone else select and transport the groceries to their home instead, so called home shopping. As this report is being written, the possibility to buy groceries this way is somewhat limited, but many forecasters believe that in the near future it will increase immensely. Because of the large volumes of groceries that are being transported, there is great transport work being done in the supply chain.

This work is a part of the project ?Våtmarker i odlingslandskapet ? uppföljning av miljömålen? (Wetlands in arable land ? following-up of the environmental goals). The main objective with this project is to study nitrogen and phosphorus retention in a constructed wetland by using mass balance calculations. Continuous measurements of nutrients and water flow through the inlet and the outlet of the wetland are made. However, substantial amounts of nitrogen and phosphorus were assumed to reach the wetland with a drain-pipe transporting wastewater from nearby houses (10 persons).

The capacity to extract information from vehicles has the potential to be very beneficial. Performing analysis on information about fuel usage, emission values and other driving properties of a vehicle can lead to great economic and environmental benefits.This report contains descriptions of two prominent systems for retrieving information of this nature from a vehicle, On-Board Diagnostics and FMS-Standard, and of an implementation of FMS-Standard.The conclusion drawn after this investigation is that these systems do indeed offer access to the benefits mentioned earlier, although to varying degrees and with differing prioritisation..

This final thesis is performed on commission of Hargs Bruk Ltd. Hargs Bruk manages one of Sweden?s largest privately owned forests. A main part of the managed forest is situated in Roslagen in eastern Uppland. Since 1934 felling calculations have been performed within the estate every tenth year.

As requested by the company Husqvarna AB, we have developed a prototype of an electrical start device to a chainsaw. This was done through the development of new details in Catia, which has been integrated with existing details. Electrical components have been purchased by HAB electronics. In parallel with the modeling calculations was done, which was the basis for determine dimensions and the choice of an electric motor and gears. Prototype 1 improved gradually and led to prototype number 2, which became the final result.

A possible way to reduce pollution and slow down the process of global warming is to increase the usage of renewable energy sources. One of these renewable energy sources is solar power. With the aid of solar panels and solar cells the energy from the sun can be transformed into both heating and electricity. The requirement to use the sun in this fashion is a suitable surface, for example a big roof, an angle between 40-60 degrees and that the surface should be exposed to the south. Almost every farm meets these requirements.

This master thesis has three purposes. The first purpose is to give a theoretical background of how to divide up forest estates and to study how the legal system for these matters works. A literature study has been carried out to give the background and a theoretical model has been made for analysing the law cases. The first purpose also partly touched the decision process in dividing up forest estates from point of view of the law of land parcelling (FBL), point of view. The second purpose is to examine effects of a change of production requirements in 3 cap.7 § FBL as regards dividing up forest estates of private forest owners.

Lokala investeringsprogram was a subsidy program which supported environmental reforms during the years 1998 to 2002. The subsidies were given to Swedish municipalities. Most of the evaluations of the subsidised projects have now been completed and included in a database. The purpose with this thesis is to analyse whether the instrument has been effective with respect to carbon dioxide reductions and costs. These calculations have focused on subsidy and cost efficiency. The analysis has been compared with a previous report called "LIP ur ett samhällsekonomiskt perspektiv". The result shows that the reduction cost for one kg CO2 has been almost one SEK, which is twice as high as the cost reported in a previous report, half a SEK.

This thesis has been carried out on behalf of IV Produkt AB and intends to set an average ratio of thermal energy losses in apartment buildings that were built during the 1960-1990. This shall be derived by analyzing the total district energy consumption that has been divided into three parts: heat energy losses (the actual heating requirements), the heating of domestic hot water and heating energy consumption for the controlled ventilation.Three different residential areas that were built during the years 1962-1966 and one that was built in 1993 has been analyzed. All residential areas are located in Växjö urban and contains between four and six apartment buildings.The analyzed objects have a mechanical exhaust ventilation systems and district heating as the heating method. No own laboratory work or experiments have been done in this thesis, the calculations have been done on the basis of parameters from VEAB, interviews with property managers, and literature studies. By calculations, we have got a result that is reported in Chapter 6.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

Outages in the electric grid can be costly for society. Because of this, reliability is one of the parameters used to regulate network companies. Reliability in electrical grids can be measured with SAIDI, system average interruption duration index, which for Fortum Distribution has increased in Stockholm?s distribution network (11 kV) in the early 2000?s.By using outage data for Stockholm from 2011-2013, sets of parameters to be used for reliability calculations in the network information program Tekla NIS were derived. Two different options for investment were then analysed: changing old cables with high fault frequencies, and installing automatic switching in distribution substations.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.