District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

This master thesis is about the collaboration between the custom dairy heifer grower and thedairy producer.The custom dairy heifer grower is a rather unusual strategy of reproductive management inSweden compared to other countries like U.S. and Denmark where the specialization withindairy production gone much further. In these countries the research also has reached muchfurther within this type of industry. However in Sweden there has been research made in thearea of collaboration, but then only within collaborations in the industries of crop production,dairy production and pork meat.The down going trend of profitability within dairy production together with poor profitabilityin the beef industry could partly remedy if more collaborations around heifer contractingwould arise. But since the industry still is of a rare kind in Sweden the knowledge about howthese types of collaborative arrangements works and their contracts are put together is poor.By that the aim of this master thesis is formulated as follows: "how is usually thecollaborative arrangement between the dairy producer and custom dairy heifer growerdesigned".

Now a day?s there is dramatic change from traditional to digital information processing in construction industry. This change can be visualized in the project concept stage where it now has accessibility to join all the data in one place. Location-based planning technique simplifies scheduling by visualizing the schedule efficiently and has many advantages such as might shortened the project period by about 10 - 20 % if the company uses location-based technology, reducing risks in many ways by maintaining production continuity and identify collisions between things etc. Vico Office software has been used for Location based planning technique and in this thesis.The purpose of this thesis work was to demonstrate how location -based planning technology change the scheduling stage in Peab, potentially reducing the project time.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

Problem areaAlfa Laval is a world leading company in the heat transfers area and have the vision to continue to be that in the future as well. The company has a lot of press lines where the utilization is high and also has started to become old. Prognosis shows that there is an increased demand of heat exchanger in the future. This increased demand is not something that existing lines will manage. To build new lines cost a lot of money and take time so it is essential that new lines are correct from the start and not need to be rebuilt or a lot of time spent to trim it.GoalThe goal is to achieve 100% theoretical utilization of the press (the press shall press the amount of plates it is designed for).

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

AbstractClimate and environmental issues are of paramount importance. Researchers agreethat we must all contribute to a reduction of gases that contribute to climatechange. Energy consumption must decrease within all sectors and the promotionof renewable sources of energy must be introduced.Each sector should aspire to decrease its energy consumption. Energyconsumption is strongly linked to waste gases that contribute to climate change.Passive houses are a part of the construction industry's methods to attain energyconservation.Passive houses are derived from low energy houses and super insulated houses. Apassive house is intended to obtain heat from the inhabitants and through theiractivities.

A group of two people, Jelena Durkan and Johan von Heideken, have worked together on an assignment from the company August Lundh AB. The company manufactures plastic products for all sizes of catering establishments. The basis for this thesis is a pre-study which shows that many of the users would be more drawn to the plates that the company manufactures, if there was a motif on the plates.This thesis will present the method of application for the motif that best benefits the company, with regard to the requirements placed on the motif, application method and the costs. The group found five relevant methods that were more carefully examined and compared to each other. Those are:Laser engraving, Hot-stamping, Injection molding, In-mould labeling and Pad-printing.The tools that have been used to solve this problem are: Requirement specification, QFD and OEE.

Hydropower is the largest renewable energy source available in today's society. Operation and production is handled by high-tech electronics. This thesis is done on behalf of Statkraft Sweden AB who wants to explore the possibility of replacing the hydraulic cylinder with an electric actuator, generally as well as a case of a small power station on the river Nissan. Whether it is the chaplain or francis turbine vanes are actuated by hydraulic cylinders. Because of Gustavsberg hydropower is inconstant operation, this report is based on power calculations, which are read and computed according to the available hydraulic diagram.

Now a day?s there is dramatic change from traditional to digital information processing in construction industry. This change can be visualized in the project concept stage where it now has accessibility to join all the data in one place. Location-based planning technique simplifies scheduling by visualizing the schedule efficiently and has many advantages such as might shortened the project period by about 10 - 20 % if the company uses location-based technology, reducing risks in many ways by maintaining production continuity and identify collisions between things etc. Vico Office software has been used for Location based planning technique and in this thesis.The purpose of this thesis work was to demonstrate how location -based planning technology change the scheduling stage in Peab, potentially reducing the project time.

The purpose of this study was to examine vitamin A and E in equine nutrition and especially in relation to forages. A literature review was conducted to examine factors that influence the level of vitamins present in forage, the vitamin A and E requirement of horses, and the absorption of vitamin A and E in horses. The influence of DM level on alpha-tocopherol and beta-carotene content in ensiled forage was investigated in a controlled ensiling study using baled silage and haylage. The results from the ensiling study were combined with data of vitamin A and E concentrations collected from literature. Calculations were done to theoretically establish how well the vitamin content in ensiled forage can cover the maintenance requirements of vitamin A and E in horses.

The Swedish government has a goal of achieving a fossil-free vehicle fleet in 2030. Heavy transport constitutes a significant part of Sweden's transportation sector and the vehicles are driven almost exclusively by fossil fuels. Siemens has developed eHighway, a concept for electric road systems enabling electrification of trucks, in order to reduce the environmental impact of heavy transports. This study aims to investigate the potential that eHighway has on transporting iron ore from the mine of Mertainen to a processing plant in Svappavaara. Electrified trucks are compared with conventional trucks, and diesel and electric trains.The evaluation was made with respect to energy consumption, environmental impact, and cost.

SUMMARYThe first and most basic skill a rider needs to learn is how to sit correctly in the saddle. This decides whether or not the rider will be able to follow the horse?s movements and use her riding aids in an efficient way. This correct seat is based on a straight line between the axis of the hip and heel. The seat must rest against the saddle with equal weight on both buttocks and the inside of the thighs.

The Northern Raccoon (Procyon lotor) belongs to the Carnivore-family and is a species endemic to North America. Every year hundreds of orphaned raccoon cubs are admitted into the Wildlife Rehabilitation Center of Minnesota (WRCM), a non-profit organization where all injured or orphaned wild animals are admitted and receive quality health care with the goal of being released out into the wild. The WRCM routinely vaccinate all of the admitted raccoon cubs with a killed feline panleucopenia vaccine, but despite this there are outbreaks of parvovirus infection every year where up to 50% of the admitted cubs have been euthanized or died. The objective of this study was to determine whether vaccinating the admitted raccoon kits has any significant protective effect to developing clinical parvoviral disease. A single-blinded cohort study was designed with two parallel, independent groups. One group was given a dose of killed feline parvovirus vaccine at admission, and the other group was not given any vaccination at all. Assignment to the vaccinated or unvaccinated group was on a per-litter basis and done randomly by drawing lots out of a box.

The objective of a site leasehold is to allow the lessee to occupy a specific plot of land. In return, the lessor imposes an annual ground rent. The ground rent ownership gives the lessor the possibility to capture the increasing in land value. As such, the rent is based on the value of the land multiplied with a percentage that reflects the yield of the land value. It is renegotiated every ten years.