This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.

When rubber equipment in a milking system ages, physical and chemical deterioration occurs and cracks, crevices, as well as deposits of organic and inorganic material is formed on the surface. Bacterial colonization can accumulate, especially on ageing rubber equipment and if the cleaning procedure is not functioning properly. Formation of biofilm in milking equipment could in turn cause bacterial contamination of bulk tank milk. ATP bioluminescence is a fast and easy way to determine the hygienic status of a surface based on its ATP content, and results are given in relative light units (RLU). The method measures both bacterial contamination as well as residues from other organic material.

ABSTRACTAbout 17% of all deliveries in Akademiska Sjukhuset end with caesarean section. The purpose of the survey was to study parental pairs experience to undergo a caesarean section and experience of information about surgery. The aim was also to see if there were differences between those undergoing a planned or an emergency caesarean section, as well as differences between the birthing women and their partners. 100 couples participated in the study and answered a questionnaire 1-3 days after they had undergone surgery. The result showed that the vast majority of parental pairs were satisfied with the information they received before the caesarean section.

Vacuum box leak testing is, because of geometrical problems, not always possible andtherefore an alternate test method with dye penetrant is used. DEKRA Industrial has identifieda need for quality assurance of the method and development of a written procedure withguidelines that lead to more uniform ways of testing.A literature study was done to get a general overview of nondestructive testing (NDT) and tosee how the method is used in different applications. European and American standards werestudied. Analytical and numerical solutions, involving flow simulation, were deemed to berather difficult and beyond the scoop of this project. Thus the problems had to be solved byusing experimental methods.

The aim of this study is to describe and analyse the creation and the design of a new public library. In order to concretize this, the study sets out from two examples, the public libraries in Simrishamn and Landskrona. The material used to attain the purpose of the study consists partly of interviews, partly of literature on the subject. To be able to put these two libraries in their historical context, the essay also provides a short overview of the development of public library buildings in Sweden during the 20th century. Another aspect that is discussed is the actual procedure of planning a public library from scratch.

Människor med långvarig smärta undviker ofta fysisk aktivitet. Explicita och implicita attityder kan tänkas vara en komponent i detta undvikande. Studien syftar till att testa ett stimulusmaterial som möjliggör en tillämpning av Implicit Relational Assessment Procedure (IRAP) som metod för att mäta implicit attityd i förhållande till fysisk aktivitet hos personer med långvarig smärta. Explicit och implicit attityd undersöktes hos 11 smärtpatienter och 15 friska kontrollpersoner. 2 av smärtpatienterna och 9 av kontrollpersonerna lyckades genomföra hela proceduren.

Background: Power by force and threats used to be the common way to collect taxes, but this procedure is today completely different. It?s now more about building a mutual relationship and with help of laws and controls steer citizens and companies to pay the tax they owe. Thus the way to collect taxes have changed over the years, the collecting of taxes aren?t a popular task to do.

In this study, 29 calves were dehorned by heat cauterisation at the age of 1 to 8 weeks. Before the procedure, the calves were given local anaesthetic but were not sedated. In connection with the dehorning, 14 calves were given the non-steroidal anti-inflammatory drug (NSAID) meloxicam and 15 calves were given placebo. During the following three days behavioural studies were performed to investigate if the different treatments had any effect on the calves´ postoperative behaviour. Head shakes, head rubs, kicks and ear flicks were studied, as earlier studies have shown that an increase in these behavioural patterns suggests postoperative pain.

The purpose of this thesis is to analyze and propose improvements to the current procedure for cost estimations of purchased maintenance work at Banverket, the Swedish rail administration. This governmental institution is responsible for the procurement of maintenance services for the country?s railroad network through open tenders. Due to the generally low number of contractors, it is particularly necessary to establish accurate cost estimates in order to assess the offers and ensure that a fair price is being paid to the suppliers. Several flaws associated with the current practice are identified and analyzed according to cost accounting theories.

Anonymous job applications as a method to further diversity on the labour market is widely discussed. The method aims to promote an equal selection procedure, where the employer can only judge on merits and experience. We are with this study on the other hand interested in seeing how this specific method of employment has been implemented. We have chosen to perform a small qualitative case study, of a limited attempt of this method in the government administration of Kortedala, a district in Gothenburg.Our intrests are to see whether we can, while studying a specific implementation procedure, show that any implementation problems have occurred. Furthermore explaining it by applying our implementation theory, that consists of Lennart Lundquists three criterias for explaining implementation problems experienced from the appliers' standpoint.

The aim was to identify if the veterinary nurse is as competent as the veterinaian in placing a nasoesophageal feeding tube. The aim was also to identify the complications with malnutrition and the advantage and disadvantage of the procedure. This essay is based on several interviews with both veterinary nurses and veterinaries. 16 persons were asked 4 short questions in conjunction with an intensive care/emergency and surgery congress in Gothenburg in February 2013. In addition 4 major hospitals that provided intensive care were asked to answer 5 more detailed questions, one answer from a veterinary and one answer from a veterinary nurse was requested.

Scania is constantly trying to improve their product development process, the PD-process.The company, along with others, is optimizing their development process in order to gainadvantage in terms of shorter lead times and larger market shares. For this to happen, a wellorganized process is required.The PD-process is divided into three different phases that are linked together by a hand-overprocedure. Scania Bus has experienced problems that stem from a lack of hand-over routines,and as a result the product development process has been slowed down. This has a number ofconsequences, one of them being the complication of new project initiations.The main purpose of this master thesis was to review the hand-over procedure. Within thestudy the project directive was also to be examined, and a recommendation of how the start ofa new project could be made easier was included.To begin with, a detailed literature study was conducted with the intention of obtaining thebasic theoretical knowledge needed for this study.

This thesis concerns how Sweden relates to life cycle assessment (LCA) in the construction process. LCA means analyzing a products impact and the analysis includes the whole life span of the product. A building has a high complexity and the combination with its unique shape will make the LCA more comprehensive, unlike e.g. aluminum cans. Recently there has been a development of a working procedure in the construction industry.

 Genotyping can be used to link genetic variation among individuals to certain diseases or conditions. Some known disorders and states that are dependent on single nucleotide polymorphism (SNPs) are lactose intolerance, venous thrombosis, hereditary hemochromatosis and the difference in sensibility among people to metabolise drugs.In this project a new kit, TaqManÒ Sample-to-SNP KitÔ for extraction of DNA and preparation of the extract for genotyping with real-time PCR and allelic discrimination, was evaluated. QIAamp® DNA Blood Biorobot® MDx Kit was used as the reference method.The purpose of the comparison was to find a method that makes DNA extraction from blood samples cheaper and faster, but with the same reliability as the reference procedure.The results of the evaluation showed a complete agreement of the genotype results between the methods tested, which means that the new method was as reliable as the reference method. The costs of reagents and material would be reduced with 52% if the new method is adopted, that alone would result in a cost reduction of 144 000SEK a year with a sample volume of 650 samples/month. The time for DNA extraction would also be reduced with the new procedure. .

Atlas Copco Tools develops and manufactures handheld industrial tools. Heat and surface treatments are used to provide the tools with certain properties. There are no routines for the choice of treatment or for how to specify treatment on drawings. Production documents that are sent for production abroad may not be clear enough. Some treatments are known as trademarks and there are no instructions for how to specify these on drawings and in CAD-models.The purpose of this master thesis work is to create recommendations for the procedure of choosing heat and surface treatment.