This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

Studiens syfte är att utreda om och i så fall hur etniskt mångfald påverkar innovationsförloppet på en dagstidning. Vi valde att använda oss av en kvalitativ metod med en abduktiv ansats utifrån vilka vi utförde nio semistrukturerade intervjuer. Som verktyg för vårt syfte användes Sydsvenskan som fallföretag, i strävan efter att kunna generalisera resultatet på branschen.Vi har använt oss av innovationsteorier för att förklara synen på innovationsförloppet, samt mångfaldsteorier för att teoretiskt kartlägga hur mångfald påverkar olika konstellationer av människor. Det empiriska materialet består av intervjuer med anställda på olika befattningar inom fallföretaget samt externa fackmän inom ämnet innovation och mångfald. Resultaten visar på vikten av etnisk mångfald på en dagstidning, där den interna mångfalden tillhandahåller den externa mångfalden med en verklighetsbaserad och innovativ tidning.

AbstractPurpose:The purpose of the study is to describe the internationalization process of one firm when in a country culturally diverse from the firm?s original market.Methodology/approach:The study is a single case study which examines one firm?s internationalization process when entering the Chinese market. The approach has been an empiric interaction between empirical and theoretical data.Findings:The theory of the Uppsala model was applied to the case-company to test the model?s completeness. The authors found weaknesses and added three more aspects to the model.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

Aim: The purpose of this study is to show models from the literature which can underlie appraisal and development in the real estate business of Gavlegårdarna.1. Gavlegårdarna should be able to use the study in their work with quality assurance off their services.2. Company?s in real estate business and other students should be able to use the study for an overview of quality models.Method: To collect data I chose to use a qualitative method based on the hermeneutic research method. The collected data was a result of literature and interviews.Result & Conclusion: From the literature there are two models that are suited for analyses of quality, that is the Housing quality model and the Gap model.

Intelligent IT-based solutions, often called Smart Grids, are considered to be the future balancers of renewable energy sources. One area within the Smart Grid concept is called demand response, which is focused on making customers more consumption flexible by making them more active in their consumption. In this thesis the aim is to analyze a business model by investigating the income potential for a demand response solution as well as its market potential. This has been done through literature studies, interviews and development of a computational model.The use of 5000 households with flexible consumption can provide a cost reduction of 17.2% or 2.4 million SEK for a balance responsible party during an average year. If the solution is used to make strategic bids on the regulation markets the study indicates that the largest potential for revenues lies within this strategy.

The credit rating industry is a complex and fascinating industry. Its history stretches back more than 150 years and has gradually increased in importance. During its history the dynamics of the industry have changed. The extended-principal-agent model was developed by synthesizing different principal-agent-relationships into one model. This model provides a holistic understanding of the credit rating industry and illustrates the interdependence between the different relationships.

AbstractTitle: Wireless Fidelity ? A Scenario Analysis Authors: Mellberg Ola, Technology Management, Lund UniversityMårtensson Jens, Technology Management, Lund University Tutors: Andersson Jens A, Faculty of Engineering LTHKarlberg Johan, Sony Ericsson Mobile Communication ABSvensson Claes, Lund University Discussion: The most significant impacts on the telecom industry over the past decades have been the rapid growth of the Internet and mobile telephone services. Currently these two worlds are converging. Moreover, the fast expansion of wireless high capacity Internet access, increased distribution of local/public hotspots and rapid development of wireless network cards have opened new opportunities for the mobile telecom industry. Research Questions:To what extent could the explosion of local and public wireless networks, using WiFi technology, affect the future telecom industry? Who will ultimately master the WiFi innovation and to what degree could this innovation open new possibilities for external players to enter the mobile voice industry? Purpose: The purpose of the Master Thesis is to provide Sony Ericsson Mobile Communication AB with the most transformational scenarios, which will enable employees to recognise patterns and interpret the meaning of WiFi-related events as they unfold.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The purpose of this thesis was to analyse, model and finally generate dynamic vehicular motions in a train. The objective with the analysis was to find important motions for a realistic train experience. The motions from the analysis were then weighted against possibilities for generation in a motion platform.A dynamic motion model was created to model the selected motions. The model was implemented in a simulation environment, more specifically MATLAB/Simulink. The simulation environment was used to simulate the model and to generate outputs to control a motion platform.

BakgrundDynamate Industrial Services (DIS) är en organisation som levererar tjänster till produktions- och tillverkningsindustrin. De arbetar inte uttalat med innovation men intresset och vetskapen om dess relevans för organisationens överlevnad i dagens ekonomiska samhälle ligger till grund för det här examensprojektet.ProblemformuleringUtmaningen är att identifiera och visa kopplingar till teorier om innovation och vilka konkurrensfördelar de ger. På så vis kan DIS uttalat utveckla innovationsarbetet och stå sig bättre på marknaden.SyfteHuvudsyftet med examensprojektet är att tydliggöra de interna processerna på DIS som potentiellt faller inom ramen för innovation och eventuellt ge förbättringsförslag kopplade till innovation. Syftet kopplat till lärandemålen är också att få kunskap och förståelse för innovativa processer och hur dessa tar sig uttryck i arbetslivet.MetodDet empiriska materialet i examensprojektet inhämtades genom en kreativ övning samt fem semistrukturerade intervjuer. Den empiriska informationen har därefter vägts mot den teori som selekterats och är av relevans för denna typ av studie.

Innovationsproduktiviteten har blivit allt viktigare i vårt samhälle och ses som en förutsättning för att skapa framgångsrika organisationer. Innovationer springer ur människors kreativitet och initiativförmåga och innebär att omsätta kunskap, kompetens och idéer till praktisk nytta.  Det förefaller som om innovation endast blomstrar under rätt organisatoriska omständigheter. Kärnan i den innovativa organisationen är en kultur som agerar vägvisande med en tro på människan. Nyckeln till innovation blir således organisationers förmåga att förhålla sig till förändring i en ofta kaotisk miljö med människan i centrum. Som ett led i detta arbete behöver organisationer kontinuerligt ta temperaturen för att tydliggöra både den nuvarande och den önskade kulturen.

The forecast ability of four well-known exchange rate models for theSwedish krona is tested in this thesis. The models that are tested arethe purchase power parity, the real interest differential model, thesticky-price model and a productivity model. In addition to thebenchmark, the random walk, they are also compared to each other.They are all tested on three different horizons one quarter, two quartersand four quarters. The mean squared forecast error criteria and thedirection of change criteria are used for evaluation of the forecastability. Only in a couple of cases are the forecast ability of thetheoretical based models significant better than the random walk..

Introduction In order to foster innovation of medical devices within the healthcare sector, a collaboration project, PUSH, has been initiated including the hospitals managed by the Stockholm County Council. The collaboration aims to capture ideas from employees and turn them into so called ?high-practice? products as well as facilitate the possibilities for medical device companies to try out their products in the settings of healthcare. Collaborations for innovation, comparable to the PUSH project, can be found in both Swedish and foreign regions, but some of them fail to survive due to obstacles affecting the progress of each collaboration. Avoiding the same destiny will be a challenge to the PUSH project.Purpose The purpose is to search for factors affecting organizational collaboration concerning innovation systems for medical device development.

Denna uppsats syftar till identifiera och förklara sambandet mellan belöning, inre motivation, yttre motivation och arbetstillfredsställelse med teamprestationer vid produktinnovation. För att kunna uppnå vårt syfte har vi utfört en surveyundersökning genom telefonenkäter med 69 företag. Vi fann ett positivt samband mellan teamarbete och teamprestationer vid skapande av innovationer. Vi fann också att belöningar ökar chansen för en individ i ett team att bli arbetstillfredsställd vilket leder till en framgångsrik innovationsprocess. Om företag ska lyckas skapa framgångsrika innovationer måste de ge innovatörer incitament i form av belöningar vilket ger upphov till arbetstillfredsställelse och en mer framgångsrik innovationsprocess..