The purpose of the study was to investigate the use and losses of energy in an existing older building. Another purpose was also to look through various options for heating systems with renewable energy in the building. The aim was to reduce the use and losses of energy. The first step was to study the related electricity bills of the building and also perform measurements and calculations of the building envelope and ventilation. The next step was to find out the possible actions for energy saving by performing measurements and calculations.

Platelet transfusions can be necessary during treatment of patients with thrombocytopenia or impaired platelet function. Platelet function in platelet concentrates (PC) deteriorate with storage time. Studying swirling is often used to control the quality of PC?s before transfusion but the method has some disadvantages. Therefore other methods can be useful, for example impedance aggregometry (IA, Multiplate® Analyzer) to measure platelet function.     In this study the change in platelet function over time was examined in buffy coat and apheresis platelets with IA where aggregation had been induced with adenosine diphosphate (ADP) and collagen.

When you talk with the municipal housing companies today there is a general view that theyare doing all the work when it comes to social responsibilities in the municipalities, theprivate landlords only have a focus on profit. The private landlords doesn't agree but says thatthey take a social responsibility, at the same time there is a difference in what socialresponsibility is. By looking at how the picture of CSR and its use is seen today we analyzewhy the opinions and definitions about social responsibility differ. We also look at CSR in itslocal adaptation in Sweden's special conditions at the same time as we compare it to CSR inEurope and the world. We thereby create an analysis of how CSR is perceived, prioritized anddeveloped in Sweden to see the root of the disagreements.In our study we show how different views and roles in the community influence the picture ofCSR in Sweden.

At Forsmark nuclear power plant the rather old-fashioned software COPTA is used in containment safety analysis. There exists a desire within the organisation to introduce a more modern software with ability to more detailed modeling and increased usability.The goal of this thesis was to evaluate the software APROS in containment safety analysis. APROS models describing one of the containments at Forsmark NPP have been developed. Two simulations of typical containment incidents, one of them a large pipe break, have been made where containment safety parameters such as pressure and temperature are studied. Results are analyzed and verified against results from corresponding COPTA models.

The need for a more efficient electrical grid has made the smart grid concept popular in recent years. The aims of this study are to identify the conditions in Sweden for implementing a smart grid and to analyse the opinions of stakeholders. One finding is that the large capacity of Sweden?s existing electrical grid decreases the immediate need for smart grid solutions. However, the rapid increase in wind power might push the development of a smart grid in the coming years.

Upplands Väsby municipality has a vision that podcars in the future will become an effective alternative in public transport, with reduced car-dependency as a result. The system would also attract new inhabitants and businesses to the municipality.This report deals with various issues that podcar stations may face. Also, suggestions for possible track laying at the stations and station design are presented. Two areas are investigated. Eds allé which is a neighborhood that is planned for housing and where the station may be planned into the cityscape from the start.

Swedish biogas is currently produced mainly by anaerobic digestion of sewage sludgeat sewage treatment plants, landfills and anaerobic digestion of household or industrialwaste. Also cattle ma-nure from farms can be used to produce biogas. Upgradingbiogas represents an increase in methane concentration from about 65 % to about 97%. In addition, particles and contaminants must be sepa-rated from the upgradedbiogas. There are various methods for upgrading and this report compares sixdifferent methods with respect to environment and economy: water scrubber,Biosling, cryo technology, chemical absorption, Pressure Swing Adsorption (PSA) andmembrane separation.According to the used ORWARE model, chemical adsorption with amine has the leastenvironmen-tal impact (methane emissions) and the lowest costs.

One of the most commonly used methods for analysis of polyphenols is the Folin-Ciocalteu (FC) method, where the FC reagent has been reported to interfere with some substances in fruit juices. The interfering substance that is present in the highest amount in most fruit juices is ascorbic acid. In this study, the total phenolic content (TPC) of three fruit juices was analysed by the FC method as well as with an enzymatic method with hydrogen peroxide oxidoreductase type II (HRP) for comparison. To investigate how the interfering ascorbic acid affects the TPC, juice samples were analysed after removal and addition, respectively, of ascorbic acid. The samples were analysed with HPLC both before and after the extraction phase of the FC method.

It is becoming increasingly important for companies to meet customer demands due to intense competition in today's global market, that forcing companies to improve their offerings and become better at managing their supply chain (Shen et al., 2006).  Long lead times can be reduced by using different methods and strategies shows various researches. Lead times occur in the planning, production, inventories and handling of products (Treville et al., 2003).The aim of the study is to develop a method to analyze the factors that affect the length of internal delivery lead time in manufacturing companies. The method also included suggestions for reducing delivery lead-time to internal customers.The main factors that influenced the length of the on delivery lead times has summarized to make a selection among the factors that can have the most significant impact. The selected elements will be used as a method to analyze how these areas affect a company?s length on internal delivery lead times.The study shows that the causes of the long delivery lead times was the location of the customer order point, uncertain forecasts, long material and production planning time, and long waits in the production and storage.The delivery lead time, according to this report?s suggested improvements reduced by centralizing CODP and makes more reliable forecasts.

This study has been assigned by Bengt Hellman who works at the logistic department at IKEA Torsvik just outside of Jönköping. The task has been to develop a new picking strategy for the Oversize area in the CDC-Warehouse. The reason why IKEA wants a new strategy is because they want to minimize the route length for the forklifts when collecting the orders.By evaluating the current strategies on other areas in the CDC-storehouse, study literature within this subject and look at restrictions for the storing of goods, we have analyzed how the Oversize area works today. We compared the gathered information, to how it should be done according to the literature to be able to work out a new functional strategy.Today, IKEA does not have a working strategy for the oversize area because of lack of time and because all the power has been put on other areas were sales rates are currently higher. This have led to lack of organisation at the Oversize area and items are just put were there is space without first analysing were it should be placed.The strategy that we have worked out and introduced to IKEA builds on easiness of understanding the layout, the employees shall know why an item is placed where it is.

Climate change is the modern society?s common issue. The developed countries areconsuming more than what is sustainable, and the climate change due to the use offossil fuels can be seen clearly. EU has specified goals, in order to stop furtherdamage, which demand that every member state have to reduce its energyconsumption by 20 % before 2020 and 50 % before 2050, relative to 1995.The Swedish government uses a number of instruments to encourage reduction in theusage of energy, but every individual has to contribute to reach the goals.With increasing energy price the cost of living is going up. A lot of people are lookingfor ways to save energy and not be affected as much by the increasing price.Investments for insulation, replacement of windows and replacing old heating systemfor a new efficient heat pump is getting more and more common.This thesis is about investigating the possibilities in becoming independent from buyingenergy for households.

This report summarizes the development of a calculation program estimating the profitability of converting a peak-load oil-fired boiler to pellets. To convert an oil-fired boiler to pellets a new fuel handling system must be designed. Changes also have to be made to some other components. Since there are many different techniques for transportation, storage and treatment of the fuel only the most interesting techniques from Swecos experience and interest were included in the study.The capacity of the different parts in the system was dimensioned based on the power of the boiler after conversion. To estimate prices, installed power and dimensions manufacturers and distributers were contacted.

I Sverige finns sedan länge ett stort behov av energi för att värma bostäder och andra lokaler. Under senare år har även behovet av kyla ökat. Sedan 1992 produceras fjärrkyla på ett flertal orter i landet. Fjärrkylaproducenten levererar kyla (i form av kallt vatten) till kunden för kylning av lokaler eller processer. Fjärrkyla kan ofta produceras på ett mer miljövänligt och billigare sätt än traditionell kylproduktion, som produceras med kylmaskiner vid varje fastighet.I detta arbete utreds förutsättningarna för att lagra kyla i form av is eller snö från vintern till sommaren.

As a result of directives from EU, with the ambition to reach environmetal goals, The German organisation Passivhaus Institut has defined a passive house. A passive house is a building that is very energy efficient and makes a small impact on the environment. The energy from the inhabitants as well as the appliances & fixtures in the building should equal the energy that is required to heat the building. A Swedish version of the passive house definition has been defined, taking into account the climate conditions and the difference in building regulations.This thesis is a request from Skanska on how it can improve and develop an ongoing passive house project, involving an infant school. The intention of this thesis is to identify difficulties & display potential development areas for infant schools.The method of research conducted is as follows: interviews of clients, ventilation consultant, consultant for heating system and an energy calculation consultant, an inspection of the infant shcool in process, investigation of completed infant schools and a study of relevant literature.From this research it was found that it is difficult for infant schools to pass the criteria for passive houses. The conclusion of this thesis provide several guidelines on how to improve the outcome of existing projects & the steps needed to be taken for future development in this area..

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.