Atlas Copco Tools develops and manufactures handheld industrial tools. Heat and surface treatments are used to provide the tools with certain properties. There are no routines for the choice of treatment or for how to specify treatment on drawings. Production documents that are sent for production abroad may not be clear enough. Some treatments are known as trademarks and there are no instructions for how to specify these on drawings and in CAD-models.The purpose of this master thesis work is to create recommendations for the procedure of choosing heat and surface treatment.

The aim of this study was to develop a load prognosis model for Uppsala district heating system to be used as a tool for heat production optimization. The methodwas to build three models for the different customer types; housing, industry andoffices and then scale them for the total system using data from Uppsala districtheating system. The heat load consists of two parts, one that is temperaturedependent and one that is dependent of the social behavior of the customers. Thetemperature part was modelled with an ARX model using an outdoor temperatureprognosis as input signal. The social behavior part was modelled using the mean ofthe social behavior from some days before and additionally by distinguishing betweenweekdays and weekends.

Eskilstuna Folkhögskola is located in Munktellstaden in Eskilstuna. The school has two separate buildings with entrances that are difficult to find. By having two separate buildings, and to be in an area where there are rules and guidelines for the area's environment, makes it difficult to guide visitors to the school premises.The purpose of my research was to examine how to guide visitors to the school, and how to increase understanding that the school's various buildings are connected.Through practices such as site analysis, interviews, I found that the guidelines are not adapted to the current situation that is established in the district.Through theory and empirical material I have produced a design proposal to facilitate Wayfinding to Eskilstuna Folkhögskola. This is presented as a landmark and a clarification of the schools entrances and signage..

This thesis examines different methods for the cooling of data centers. Several means of cooling with the refrigeration cycle have been studied, as well as the feasibility of using free cooling in different parts of Sweden. In addition, the possibilities of transferring excess heat to a nearby district heating system were investigated. It was found that in all investigated cases except two, the data center could be cooled solely with free cooling for at least 300 days a year when only the outside air temperature was considered as a constraining factor. The limit was then set to 20 °C.The vast majority of all district heating systems in Sweden get little to none of their heat from other excess heat sources.

In 2005 Gunhild Eriksdotter published Behind The Facades in which she analyses the ways of approaching historical buildings in archaeology. Eriksdotter emphasizes that the archaeology of buildings is in dire need of renewal videlicet the traditional outlook on buildings as two-dimensional objects need to change. She develops a method of analysing the spatial dimensions in a three-dimensional world. By fusing theories and methods in excavating archaeology and architecture, she is able to give us a new way of approaching buildings. Her method includes the analysing of a buildings material, spatiality and use.

Industries with energy costs as a large proportion of their total costs are greatly affected by the instruments deployed to cope with the Swedish climate and energy policy goals. With energy costs representing more than 30 % of the total costs, tomato cultivators are one of the affected industries. In order to remain competitive with other countries, a more resource- and cost-efficient cultivation of tomatoes in greenhouses is desirable in Sweden. Based on the concept of industrial symbiosis, this study investigates the prerequisites for a resource-efficient production of locally grown tomatoes in Sweden through the utilization of low grade industrial waste heat. The study is based on the foundry industry as the supplier of waste heat.To investigate the environmental, technical and economic potential of the exchange of waste heat, a comparative life cycle assessment, an inventory of the supply of industrial waste heat in Sweden, a compilation of potential technologies for the recovery of low grade industrial waste heat for heating greenhouses and a comparative life-cycle cost calculation were carried out.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

Design of a house requires knowledge of both technology and economics. Heating and ventilation shall be designed, costs are calculated and estimated and requirements must be fulfilled. Which heating system is to be elected is also a difficult choice, especially with rising energy prices as a factor.The choice of energy system is not always given, because it depends on several factors. Below is a comparison between district heating, geothermal heat pump and electric boiler from an economic standpoint. In a previous report appears district heating and geothermal heat pump as the best options.

The purpose with this work that is the basis for this thesis was to help Nattavaara Economical association to develop a program for handling invoices, customer information, and storage. The program and this thesis have been done in cooperation with the economical association in Nattavaara. Some of the demands on the program are that it shall handle customer information, storage status, invoices and diesel consumption. The program must be able to printout invoices, reminders, delivery notes, a customer list and a storage list. All information will be stored in a database.

Ethanol for automotive purposes is an issue much debated and researchers disagree about the benefits of bioethanol. Converting energy-rich crops into ethanol suitable as motor fuel is a complex process and continuous development and improvements of processes and material used are important steps in the work of developing environmental friendly fuels. Grain is usually preserved by drying which consumes a lot of energy. Alternative storage of high-moisture grain in airtight storage systems reduce the energy required to produce bioethanol and studies have also shown that ethanol yields are increased more than 10% in ethanol fermentations of moist grain compared to dry. Airtight storage is often not perfectly airtight so biocontrol agents are necessary in order to preserve the grain.

New production is not the only thing that is important for the city?s growth. It is also crucial to recover existing buildings in order to create attractive areas. There is a school in Va?stera?s city called Wenstro?mska skolan which consists of six high schools that provide different professional specializations and which has an area of about 35000 square meters.

The project has been performed in a close collaboration with Hörsam who works in the field of hearing technology. In a first meeting with the company, the Project group was showed a few existing storage boxes for hearing aids. The company thought they were unnecessarily large with plenty of unused space and wanted a new, smarter solution to be developed.The project began with user studies in which audiologists, maintenance technicians, future users and others were interviewed. The purpose was to obtain their views on today's storage boxes and to find out how well the users maintained their hearing aids. It proved to be a large lack of knowledge regarding the management of hearing aids within the users.

This is a two years master?s thesis that studies five libraries. The purpose with the paper was to look at a specific material and study how it expresses itself around the architecture of the buildings, an if the descriptions were different depending on the library, public library or university library. The conclusion is that the ways of describing the library buildings have varied; depending on one part time and one part evolution. The way library buildings look and have been used has changed over time also, and as well how people perceive and talk, or in this case write about them..

Eskilstuna Folkhögskola is located in Munktellstaden in Eskilstuna. The school has two separate buildings with entrances that are difficult to find. By having two separate buildings, and to be in an area where there are rules and guidelines for the area's environment, makes it difficult to guide visitors to the school premises.The purpose of my research was to examine how to guide visitors to the school, and how to increase understanding that the school's various buildings are connected.Through practices such as site analysis, interviews, I found that the guidelines are not adapted to the current situation that is established in the district.Through theory and empirical material I have produced a design proposal to facilitate Wayfinding to Eskilstuna Folkhögskola. This is presented as a landmark and a clarification of the schools entrances and signage..

This thesis is intended to review and create a greater understanding for the history and originsof printed scraps from late eighteenth century to the beginning of the twentieth century.A questionnaire survey was sent out to several Swedish museums, containing questionsconcerning their collections, possible exhibits, special difficulties and types of damagesconcerning scraps and their current storage. A visit to the Gothenburg city museum storagewas made to take a closer look at their scrap collection and how they were stored. Thisresearch resulted in an understanding regarding the current situation of printed scraps, whichunfortunately appears to be quite poor and inattentive. These results are presented in the firstchapter.The second chapter describes the history of printed scraps, followed by a chapter presentingrelevant printing techniques and technology. This is followed by various chapters dealing withhow the printed scrap has been used through the ages, history and development of motifs andthe album's significance.