The interest in building low energy houses has increased along with the rising engagement inthe climate questions. With the advancing energy prices it is highly suitably for those whobuild and administer their buildings in long-term to build energy-saving houses. 40 % ofSweden?s total energy consumption constitutes of the energy in residences, therefore it iscrucial to take advantage of all the free energy as we possibly can. With crucial questions likequality of living and profit low energy building is a subject that concerns us all.Three proposals for apartment blocks are presented in this work on a real estate in Stockholm.Each proposal is developed through unique processes of design with the purpose to displaypossibilities to deal with the energy requirements of today and tomorrow through energybased architecture.The first proposal is an apartment block based on a traditional design process, the demands ofthe property owner and it?s affected by opinions from architects.

The Russian operation on the Crimean peninsula has been referred to as a victory enabled by the operationalization of the concept of New Generation Warfare. According to some military theorists, this concept and its operationalization cannot be characterized in terms of the traditional wars waged up to this point. It is, however, also argued that this new generation of warfare is primarily a new approach to strategy, a new way of applying traditional methods to achieve political goals. The purpose of this study is to discern whether Russia employed strategic deception in its operation in Crimea and if this is the case; what methods and principles were used and if these can be explained using a traditional view of deception. The application of theories on deception by Michael Dewar and Barton S.

An increased number of participants in the construction industry is asking for accompanying terrain models to the project in order to get a better understanding of the field. When the desire to create buildings that fit together nicely with the surrounding area is increasing, it becomes more and more important to have a broad base of knowledge about the ground on which the building is to be erected. Terrain models are also very useful in the planning of logistics, documentation for landscape architecture projects, and billings for mass calculations.Surveys for creating terrain models can be performed with laser scanning. The advantage of laser scanning is the time-effective surveying, the detailed information as well as the ability of application in complex environments resulting in a cost-efficient project. With this in mind our thesis was defined in collaboration with the company Bjerking AB in Uppsala in order to investigate if there were any softwares suitable for terrain modeling.

Often, the green is handled as an opposite to the built, but if it could be seen as a part of the built and the society, the planning will be easier to handle. The thesis work wants to create a method that treats villages in an analytic way in a context; with green, blur, grey and all the other colors that together are the completeness.This master's thesis is made to be used as foundation in detail plannng in the municipality of Örkelljunga. Target audience is on one hand those who work with planning and green matters in Örkelljunga municipality, but also other planners who work with landscape.Literature in the field of green city planning has been studied and 30 methods for analysis have been valued. The method for analysis that has been used in this work is a merging of ten different methods and has included literature studies, sketches, interviews and work on spot. The ten methods are consciously chosen to together make one comprehensive and true image of the village, as far as it is possible.

Studies show that children?s and adolescents health decreases, especially the mental health. There are today many health methods that flourish in the school area. Methods that is external and used as individual interventions and methods that have the intention to integrate health in all aspects of the school curriculum.Research on health projects often show what the intervention or method has produced. Few studies have been found who discuss the pupil?s own experience regarding health projects.

At Volvo Cars Torslanda's paint shop there is a requirement to in a fast and effective way get an overview of the plants capacity. Therefore a capacity template was constructed as a tool for the engineers at Volvo several years ago. This template has during the years become complicated and outdated. Thus this thesis work will resort as a new capacity template, built from scratch. The new template has been built up based on requirements from Volvo and the concept of OEE (Overall Equipment Effectiveness).

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

The purpose of this study is to give a description of how six pedagogues in the third and fourth grade teaches mathematics and which working methods they use. When using the term working methods it is implied that it can for example be outdoors pedagogic, laboratory material, problem solutions et cetera. This material can both be an everyday material or a pedagogical material. The research was carried through by interviews and observations. Six pedagogues were interviewed in two different districts.

During the 1990?s a large number of building projects were revealed where lack of moistsafety precautions during the construction process had led to extensive moisture damage. Alsoresent implemented studies have shown that the problems with moisture damages have ratherincreased than decreased during the past few years. Moist is considered to be one of the mainfactors to cause unhealth due to deficiencies in the indoor-environment and does also causeunnecessary expenses and a reduction of the confidence in the construction industry.In this Bachelor of Science thesis three projects have been reviewed to examine how moistsafetyhas been observed during the construction process. Main focus has been to identify thebuilding components that are the most exposed to moist, and to examine how they have beentaken into account during the period of design and construction.

The purpose of this paper is to examine how teachers choose to work with the teaching of reading and writing skills, how teachers justify their choice of teaching method and how the documentation of student development is being used. This paper also discusses the definition of reading and writing, phonological awareness and how different reading- and writing educational methods can be combined. The gathering of information has been done through a literature review in which I have looked at past research on reading and writing. I have also conducted qualitative interviews with teachers involved in literacy learning. The result of my research shows that it is not possible to determine which literacy learning methods that are most effective.

The purpose of my study is to investigate teacher?s perceptions of their mission in the preschool class, and how they work to promote children?s written language development. What methods and working methods they use to awaken curiosity and motivate children to read and write. I am using the qualitative research method to get answers to my questions. I have made four qualitative interviews with four teachers in preschool classes from different schools.My questions are:What conceptions does teachers have about their mission in a preschool class?What different methods and approaches does teachers use to stimulate and wake children?s curiosity for reading and writing development?The theoretical basis for my study is the socio-cultural perspective, where learning occurs in interaction.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

This paper is a degree project on the C-level, 15 points at University West, Department of Business and IT dept. Informatics. This study is about agile methodology and its impact on IT projects. Requirements management is a process within an IT project, where customer has certain requirements that must be met by an IT system. The difference between the traditional and agile development is in the requirements management process and it can cause problems in a project.

The aim of this study is to describe what teachers and principals experience in schools regarding threats, violence and harassment towards teachers. A phenomenographical inspired approach has been used to describe and analyse the conceptions of five teachers and five principals. The findings of the study indicate that there is no impending risk for teachers to suffer from violence, threats or harassment. However, it does occasionally happen, and the findings of the study indicate that there are some factors that increase the risk. The major three factors are: fear, personality and inexperience.

This project is based on my fathers farm which lays outside Löberöd, twenty kilometres south of Eslöv in Skåne. While my family for some time have thought about building a new milkingstable with AMS(Automatic milking system) I decided to compare the AMS with a conventional milkingstable. We are abit concerned about how many cows we should have in the new stable. Because of that I calculated with two different number of cows. I have compared three different types of milking stables: One alternative is 180 cows milked in a double eigth hearing bone milking stable. The second alternative is 128 cows milked with two DeLaval VMS-robots. The third alternative is 171 cows milked with three DeLaval VMS-robots. One salesman from DeLaval and one salesman from A-betong helped me to get marketprices on the milkingrobots, building, ventilation and prices on all the concrete. In all the costs labour is included. The rest of the costs are calculated in a softwareprogram called K-data 03 which is a program with predicted costs. The calulations from the program showed that the price in the milkingpit system was 51 000 sek per cow.