
Sökresultat:
5519 Uppsatser om Building methods - Sida 27 av 368
Verktyg för mätning av tjänstekvalitet på bredbandsnät
Operators and Internet service providers invest in broadband to be able to deliver new services that require higher data transmission rate. A way to make this possible is to use ADSL, Asymmetric Digital Subscriber Line, as the access technology. To be able to handle this technology, the service providers should do a pre-qualification. Methods and tools are needed to analyze the local copper lines and decide if these qualify for ADSL with respect to service availability and possible bandwidth through the lines. This report brings up some methods for pre-qualification of ADSL, the important quality parameters and how to gather them from the available services today.
Utformning av riktlinjer för trafiksäkerhet i mindre stadscentrum : fallstudier i Bollnäs och Sandviken
Several cities have implemented various projects to improve traffic safety in city centers.During 1970s and 1980s the city centers changed as the suburbs grew and large shopping centers were located outside the center. At the same time, several projects were initiated with construction of pedestrian streets and restriction of traffic in the center. In year 1994,shared-used areas were introduced in Sweden and these areas are often used in center environments.In Sweden, municipalities are responsible for integrating security in public places and in comprehensive plans and detailed development plans. The National Board of Housing,Building and Planning is the authority for administrating planning issues and develop general guidance about planning. Traffic is one of their key issues, although today there are no concrete guidelines from the National Board of Housing, Building and Planningfor the design of traffic safety in city centers.Traffic safety in city centers affects many people because the city center is a public place.It is therefore important that there are current guidelines available that are helpful for changes and improvements in traffic safety in the city center.The purpose of this report is to formulate guidelines for planning city centers from a traffic safety perspective.
Binär matchning av bilder med hjälp av vektorer från deneuklidiska avståndstransformen
This thesis shows the result from investigations of methods that use distance vectors when matching pictures. The distance vectors are available in a distance map made by the Euclidean Distance Transform. The investigated methods use the two characteristic features of the distance vector when matching pictures, length and direction. The length of the vector is used to calculate a value of how good a match is and the direction of the vector is used to predict a transformation to get a better match. The results shows that the number of calculation steps that are used during a search can be reduced compared to matching methods that only uses the distance during the matching..
Överklagande och dess roll inom bostadsbyggandet : En granskning av plan- och bygglovsprocessen
The aim of this diploma work was to obtain a review of the appeal process in Sweden under the Planning and Building Act and the possibilities of appeal in the planning and building permit process. The work was intended to identify potential problems surrounding the appeal process and possible efficiency measures. The goal was to form a report that provides a satisfactory overview of the appeal process in theory and practical application as well as provide relevant concrete proposals on how the appeal process can be streamlined.Background and facts surrounding the work were taken from different types of literature and through several interviews with representatives in government, industry and politicians.The main problems related to the appeal process are in the long processing times and the high number of appeals. There is a great interest to streamline the appeals process and the government is going to launch studies in which possible future actions will be investigated.It is possible to appeal for up to two instances before you need a so called ?leave to appeal? in order for your complaint to be passed on to the next instance.
Miljövärdering av resurssnål betong med införande i BIM
This thesis aims to illustrate how environmental impact can be reduced, through the use of lean concrete. It also illustrates how environmental data can be applied to a house through implementation with BIM. In this study a unique concrete structure developed by Swedish Cement and Concrete Research Institute is assessed for environmental impact, by calculating the carbon dioxide equivalents using LCA methodology. The construction is a sandwich element where the concrete is made ??up of three layers.
Validation of realtime-PCR of Fusarium avenaceum for detection in wheat
Mould is a common contamination in cereals. The growth of mould can stimulate mycotoxins production andsome of which at critical concentrations cause health problems in humans and animals. Fusarium is one of thefungus species that has been found in crops and can cause major problems for farmers such as reduced harvestand economic losses. A group of Fusarium species, Fusarium avenaceum, Fusarium poae and Fusariumtricinctum express a mycotoxin, enniatin. The limited information available today about enniatin-forming fungiis that they grow out on fields of wheat in colder climates.
Kundrelationer och kundlönsamhet: En fallstudie av ett modeföretag
This thesis studies the customer relationships and customer accounting methods used by a Swedish fashion company. The aim is to test the empirical applicability of the relationship based framework developed by Lind and Strömsten and to explain potential differences between empirical observations and theory. The framework is based on the categorization of four customer relationship groups and the appropriate customer accounting methods to be used for each relationship. The fashion company, that recently assessed the profitability of its customer base in an aim to implement a new customer strategy, is the object of the qualitative case study. The case study reveals that all customer relationships are to be found at Whyred, except the connective customer relationship.
Total organic carbon (TOC) and chemical oxygen demand (COD) - Monitoring of organic pollutants in wastewater
Total organic carbon (TOC) and chemical oxygen demand (COD) are two methods used for measuring organic pollutants in wastewater. Both methods are widely used but the COD method results in production of hazardous wastes, including mercury.The purpose of this study was to validate the method TOC that will replace COD and find a factor to convert TOC to COD. In this study 26 samples were analyzed from four sewage treatment plant in the municipality of Enköping.The results show that the COD method could be replaced by the TOC method.The factor for COD/TOC was between 3.1 - 3.3. Both methods will be used in parallel until 2013 when it will be forbidden to use the COD analysis..
Slusseneländet
Stockholm is constantly growing and changing. Despite this, for various reasons, it is difficult to execute large building projects. With starting-point in decision making theories we have tried to investigate these difficulties. More specifically we have chosen to study why it has not been possible to rebuilt Slussen in Stockholm. To help us structure our study we have based our research on another large comparable building project, the Globen City project.
Det finns bara en av dig och det är du? : -personliga varumärken som ansökningsstrategi-
The climate at the labour-market in Sweden today means that students who have recently passed their examinations find it quite difficult to find work. The competetiveness calls for a strategy to find advantages in the employment process. The strategy explored in this thesis is called personal branding. We believe that by building a strong personal brand you can increase the possibilities to influence the decisions of those responsible for recruitments in our society. The question we ask ourselves in this essay is how to build a personal brand with the power to give students a competetive advantage in the employment process.
Hur man genom kreativt arbetssätt kan gynna barn med läs- och skrivsvårigheter.
Abstract People who have problems with the written language will face serious difficulties in todays society. Our social structur is based on the criterium that every individual has to be able to read and write, and for this reason it is important that pupils with learning difficulties receive help. The purpose of my investigation is to examine how children with reading- and writing difficulties can benefit throught creative methods. Children with reading- and writing difficulties are in need of these creative methods that exist today. Amongst all of our public healht issues, dyslexia is one of the biggest problem we have today and children are therefor in need of these creative methods. Through qualitative interviews with two educationalists there has been established thad the creative way of working benefits children in many ways if it is preformed correctly.
IT-konsultens konsultationsprocess
How does IT-consultants reason in their consulting process regarding the
development of a clients IT-based internal recruitment system?
The purpose with this paper is to investigate how an IT-consultant is reasoning
in a consulting process and investigate whether consultants are using
established models and methods in their work.
We have chosen to work with a qualitative examination to attain our purpose. In
our work gathering the empirical facts we have been working with a case study,
an observation and a simulation exercise. The combination of these has made it
possible to carry out the paper and produce the most correct data possible.
Conclusion: We state that IT-consultants do not use any theory-based methods,
they use process methods created by themselves and their company.
Ämnet Idrott och hälsa som grund för ett längre arbetsliv
The purpose of this study is to examine how well the teaching of physical education meets the needs of a future life in the building and construction industry. In order to answer the survey's purpose, we have carried interviews with teachers for the subject Physical education and health as well as with teachers for the Building- and construction program in order to through their experience gain understanding of common health problems in the profession, but also to gain a deeper understanding of the importance of the subject Physical education and health for this profession. We have reported and described previous research and then analyzed it during our processing of collected data material. The result of the interviews showed that the teachers as far as possible are trying to adjust the lessons to suit this practical program. They also indicate several aspects to consider in order to further customize the education for students in the Building- and construction program.
Evaluation of ELISA and rapid test for the analysis of fecal Calprotectin
ABSTRACTBackground Calprotectin is a protein found in the cytoplasm of neutrophile granulocytes. In the course of inflammatory bowel disease (IBD), calprotectin is released during chronic inflammation in the gut. Activation of neutrophils during the inflammation is followed by activation and secretion of pro-inflammatory molecules such as calprotectin. Calprotectin is stable in stool up to 7 days and can therefore be used as a non-invasive marker for diagnosis, treatment and measurement of the disease activity in patients with IBD. The most common method for analysis of calprotectin concentration is ELISA.
Automatiskt bygge av FUS39A
This paper describes the design and implementation of an automated build system for the JAS39A simulator FUS39A at HiQ:s offices in Arboga. The assignment was to automate the process in which modules are built; the simulator is composed of a number of modules which are built manually at the end of each week, this process takes about a day of manual labor. The system can automatically build a module as either a scheduled service or by manual invocation. The system contains functionality for reporting the build results to any given recipient by e-mail. The purpose of the system is to free up the time put into manually building the modules for better suited tasks by automating the build of FUS39A.The assignment was split into two parts, an analysis part where information of the old system was gathered, tools and methods were chosen and the new system was designed.