Syftet med detta examensarbete är att vidareutveckla glasfiberbalkar så de kan användas som mellanbjälklag i småhus. Förebilden var ett ?Delta Deck? som utvecklats av Altakor Group och används i brokonstruktioner. Denna profil har vi sedan modifierat och optimerat för bruk i småhus. Den största skillnaden är att vi valt att inte använda den så kallade ?snap-fit?-tekniken.

Th is essay is the final piece of my eduacation. The essay contains material that have beenproduced from a study that have been made in Majviken, Gothenburg, one of many cohousingcommunitys in Sweden. The special quality this building poses is that is was originally built as acohousing living but in the past 25 years is has been a housing estate without any form of servicefunction included.During the last year the whole house have been remodeled and a new kind of livingconcept havebeen created, a lifestyle living with many different kinds of service functions included, hostess,common premises for the residents with things suchs as gym, saunas, movietheater and relaxationareas.The study is about the residents living in Majviken, and how they feel about the new way ofliving but also how it affect their lives. What do the new living lifestyle stand for?My original intention have also been to observe and make interwievs with the residents to capturetheir thoughts and in the end have the possibilty to summarize and compare how it was before theredmodeling..

This project has been created with the assistance of Fredells. Fredells is a Stockholm based company with a focus on the retail of building products. Fredells also produces prefab- or prefabricated products which are either completely or partially ready for assembly the moment they arrive to the building site. These prefab-products are primarily delivered to customers within the Stockholm region. The building industry is a conservative market where the incentive to changes has been relatively low compared to other industries.

I denna rapport behandlas frågeställningen: Hur kan man, med så få element som möjligt, skapa ett trovärdigt 3D-material; trovärdigt nog för att det ska kunna uppfattas som det verkliga material det försöker efterlikna? Som med mycket annat kan det vara en fördel att ha mer grundläggande förståelse för hur det man arbetar med och försöker efterlikna är uppbyggt. Syftet är att ta reda på om det finns några grundpelare i 3D- grafik som man bör ha i åtanke när man är ute efter att skapa ett visst sorts 3D- material utifrån verkligheten. Materialen som undersöks är trä, sten, metall, hud, hår/fjädrar och tyg. De presenteras i programmet Marmoset Toolbag och idén är att bryta ner dem till de minsta beståndsdelarna som behövs av ett material utan att förlora känslan av det materialet.

This report is written on commission by WSP Acoustics. The report studies the outdoor sound levels on school yards in Stockholm. The questions given by the company to be answered was what are the actual sound levels at diffrent school yards with low traffic noise and how can you construct a facade element that reduces the sound level from the outside and meet the indoor requirements. Mesurements for four hours was done at eight schools set north and south of the city centre. The measurement period included one school break and one lunch break.

Föreliggande studie handlar om språkstimulans genom den fysiska miljön i form av miljöns utformning, tillgänglighet av material samt vilka val barnen gör i relation till dessa faktorer. I vår studie har vi använt oss av en kvalitativ forskningsansats där vi observerat två förskolor med barn mellan tre till fem år. Tidigare forskning beskriver vikten av materialets betydelse och utformning av rum för att barn ska ges förutsättningar till en god språkstimulans. I vårt resultat visades att rum och material har inflytande på barnens val vilket vi kunde se genom observationer. När en miljö erbjuder en variation av material fann barnen ett intresse kring leken och en kommunikation uppstod, medan en miljö som innehöll mindre material gjorde barnen rastlösa. .

An emerging trend within the construction industry is the expectation of the customer to experience and sense the product, maybe even in a customized manner. The latter trend would extend the necessity of incorporating not only function and aesthetics, but also perception and sensation. To meet this trend while at the same time improve the productivity the use of information technology such as BIM and technical platforms has increased in construction projects. Nevertheless, in spite of large investments, the construction industry has not managed to increase the effectiveness and productivity as much as other industries. Evident is that successful use of information technology depend on the integration and collaboration of various experts in a continuous and dynamic process.

Elever i den svenska grundskolan blir allt sämre på matematik enligt den senaste PISA undersökningen. Syftet med denna litteraturstudie är att besvara om användandet av laborativt material inom matematikundervisningen i grundskolan förbättrar elevernas matematikkunskaper och vad som påverkar användandet av laborativt material.Denna kvalitativa litteraturstudie är baserad på nio tidigare studier. Den visar att användning av laborativt material i undervisningen bidrar till att öka grundskolelevers matematikkunskaper. Flera faktorer påverkar resultatet och hur materialet används, lärarens uppfattning om laborativt material, kombinationen av tydliga instruktioner till eleverna och ett bra anpassat laborativt material för respektive matematikproblem samt lärarens egen kompetens att använda sig av materialet i undervisningen..

The swedish national board of housing, Building and Planning,recommends that all stakeholders in the construction industryperform a moisture control design to make sure that the buildingachieves good moisture resistance. Since June 1, 2006 there are nospecific requirements or quantitative values for air leakage.Although the swedish national board of housing does presentrequirement that the building envelope must be sealed so that theclient?s requirements for specific energy consumption and installedelectric power for heating purposes are met. Despite this, studiesfrom SP shows that few buildings meet the client?s requirements inspecific energy, which increases the risk of occurrence ofcondensation-related moisture damage.This study aims to evaluate curtain walls connections from airsecurity and moisture safety.

The report aims to describe the austenitic stainless steel Sanicro 25 from a thermomechanical point of view. The thermal and mechanical properties of the material make it suitable for use in coal ? and thermal power plants. By the use of Sanicro 25 it would be possible to bring the efficiency of these plants up while bringing the carbon emissions down.A material model is created from material testing and validated through simulation in the finite element software Abaqus. The model that has been derived describes the material behavior during loading and stress relaxation for the first cycle in a thermomechanical fatigue test well.

As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

A place that mixes different kind of uses of space. Two main theatres inside and a lot of smaller rooms for different venues. A methaphor the tide have strong impact of shaping the building.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

The purpose of this essay is to examine if the municipality has a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project.In Karlstad there is now (2006) a large building project in form of a shopping mall. This project is in its final stage of completion and offers me a suitable case to examine. To undertake the purpose of the essay, the following research question is formulated:Do the municipality have a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project as the Mitt I City project?In an attempt to examine the project and the planning process, three themes are applied. The first theme derives from the hypothesis that the part that initiate the process gets the upper hand as future discussions are taking place in relation to the original ideas.

The purpose of this thesis is to investigate the degree of influence of holes in the web of steel beams with long spanson weakening of their bearing capacity. Making holes in the web of the beam generally reduces the bearing capacity of the beam. However, it might be necessary seen from both an architectural perspective as well as from a building services perspective by creating an opportunity for building installations.The objective of this thesis is to examine how much an I-beam can be weakened without sacrificing safety and functionality. The investigation has been done by using Finite Element Method through commercial software.The regulation for structural design of building structures in Sweden used to be specified in the document known as BKR. But this was replaced by the European norm Eurocode back in May 2011.