The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

I denna uppsats undersöker vi ett antal grundförutsättningar som behövs för att uppnå en systemförvaltning som skall kunna stödja en organisations verksamhetsprocesser. Dessa grundförutsättningar som vi grupperat i föl- jande fem faktorer: affärsmässighet, organisation, styrning, förvaltning och processer har vi främst identifierat ur teorier kring systemförvaltning, pro- cessorientering och organisationslära. Undersökningen som genomförts på Luleå tekniska universitet har visat att alla dessa är viktiga för en fungeran-de systemförvaltning ur ett verksamhetsperspektiv..

Evaluations of open Ditch status and function, with an assessment of suitability of a conversion to a two stage ditch as a low maintenance alternative. To illustrate Swedish drainage problems this work focused on two agricultural drainage associations assessed in detail with a new method called MADRAS (Minnesota Agricultural Ditch Reach Assessment for Stability). With the assessment of the MADRAS method estimates were made to conclude the ditches operating problems. This was made through measurements of sediment depths, mass bank failures etc. in order to quantify ditch problems and propose practical actions for improved ditch stability and water quality. The MADRAS surveys were conducted in two main ditches that drains 2900 hectares of land on the northern shores of Mälaren. In the study measurements of the ditch cross-sections were also conducted to compare actual profiles with the original map profiles. The evaluation showed that parts of the studied ditch sections were operatively poor; main reason was mass bank failure, undercut channel banks, sediment aggregations and narrowed ditches. The profile survey shows that a majority of the profiles 80 % has sediment accumulations there remains only 64 % of the original profile from the map.

Abstract Title: A messy story ? a case study of Secorocs process flow of DTH-pipes Presentation date: 2010-06-02 Course: Bachelor thesis in businessAuthor: Kristoffer ForsmanAdvisor: Kjell GustafssonKeywords: Management control, process control, lean production, process flow analysisPurpose: The purpose of this bachelor thesis is to develop an overview of the process flow for a specific product, and with the help of this mapping based on a lean production philosophy show possible improvement proposals and how these can lead to a more efficient process flow.Methodology: I have used a case study of Secorocs DTH-pipes and my primary data are gathered through interviews and observations. I have used theoretical framework to establish a process flow analysis. This is to obtain data on process activities and whether they are creating value or not. This leads to a current mapping of the situation in Secoroc on DTH-pipes and then analyzed and suggestions for improvement are developed.Conclusions: That by using the above mentioned mapping of process flow of DTH-pipes, problem areas could be illustrated.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

År 2011 startade SDC, skogsnäringens IT-företag, arbetet med att övergå från en funktionsorganisation till en processorganisation. Detta har medfört förändringar i ledarskapet då tidigare avdelningschefer har ersatts med process- och resursägare. Syftet med denna undersökning har varit att identifiera förbättringsförslag för samarbetet mellan process- och resursägare vid SDC. Studien har en kvalitativ ansats då samarbetet mellan process- och resursägare har studerats. En kvalitativ ansats har valts då målet är att uppfatta informanternas upplevelser kring samarbetet mellan process- och resursägare så nära verkligheten som möjligt.

Denna studie behandlar begreppen process och produkt. Syftet är att genom ett hermeneutiskt perspektiv undersöka några bildlärares syn på begreppen process och produkt i bildundervisningen på högstadiet. Tidigare har fokus legat på elevers färdiga produkt men idag är bedömningen i bildämnet mer fokuserad på elevers process (Skolverket, 2012:3). Undersökningen genomfördes genom  kavlitativa intervjuer. Intervjufrågorna är förankrade i Lindströms (2002:4-5) process- och produktkriterier.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

VAV (Variable Air Volume) system has been studied in a newly constructed office-building. The goal for the study has been to evaluate how the ventilations system work in practice, if adjustments can be made to achieve an more energy efficient system and to evaluate if other alternative ventilation systems is to be preferred in the further.The degree project has been executed at Helenius Engineering Firm who is working with the environment, media systems, HVAC and energy in buildings. The building that has been studied is owned and operated by Akademiska hus.Literature studies, visits at site, inventory, review of system documentation, energy analyses, interviews, key figures, LCC, sand energy- and indoor climate simulations has been made to study the building. Where appropriate some tools from Six Sigma have also been used.How to achieve an energy efficient system and a pleasant indoor climate is studied with human health and well-being as base for the indoor climate requirements. Technical support systems such as ventilation systems have to be designed so that an acceptable indoor climate can be achieved.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

This essay analyzes the production process in connection with the original play Utopia 2012, which premiered at Backa Theatre, Gothenburg, Sweden on 27 October 2012.The aim of the essay is to seek a deeper understanding of this particular production process. No universal process plan was employed when creating Utopia 2012. Therefore, taking into account artistic, technical and administrative aspects of the work, a chronological process map has also been constructed in connection with this essay, in order to clarify each step of the theatrical working process.The theoretical approach is hermeneutic, and the material is based on interviews with key individuals with different professions and functions within the working process in order to gain multifaceted perspectives and results. The interviews took place at Backa Theatre with the exception of those held by telephone with the project?s two producers, both of whom by that time no longer worked at Backa Theatre.The findings of the essay mostly indicate that, with the significant exception of director Mattias Andersson?s artistic vision, no fixed process map nor explicitly articulated common goals were employed in this particular theatre production.

The concept of large paintings includes panoramas, cycloramas and other paintings thatin size exceeds the normal magnitude of wall hung paintings. When these large paintingsare mounted in the ceiling, they are referred to as plafonds. When they are performedon canvas, certain kinds of structural distortions and stress occurs. In addition, becauseof their size and mounting high up in the ceiling, plafond paintings are often difficult tohandle, which leads to less or no maintenance. A plafond may therefore be left withoutattendance for many decades.This thesis has its focus on what happens with plafond paintings on canvas when they areexposed to gravitational forces, and the problems involved in restoring large paintingsmounted in the ceiling.

In a global context the traditional democratic process is facing new challenges. Scholars are talking about a transition from government to governance, where local and regional networks as well as international collaboration are an important part in how regional policy is produced and implemented. In this paper the processes in regional projects funded by the European Union are considered, and related to the traditional democratic process. The study has been fulfilled through informant interviews with representatives from four EU-projects. The interviews are supplemented by a qualitative text analysis of current statutes.

A uniform environmental rating system for green buildings is demanded in today's society, where the requirements of the energy consumption for real estate are increasing. There are several different systems around the world used to rate buildings, all with different assessment criteria and starting points, which make it difficult to compare environmental rated buildings with each other.The purpose of this paper is to acquire knowledge about the differences between the Swedish environmental rating system Miljöklassad Byggnad and the American LEED, to discover which system is most advantageous. We also examine whether environmental rating affect the value of a property.Miljöklassad Byggnad is relatively simple structured, which makes it possible for private individuals to rate their property. LEED is better structured on the other hand in the case of environmental classification of commercial properties, because there are manuals for among others hospitals, schools and retail. The rating system for Miljöklassad Byggnad is good since the system seeks to fix the number of errors and deficiencies as soon as possible.