Finnhamn is a small group of islands in the Stockholm archipelago. At Stora Jolpan, the biggest island, there is a hostel. The main building was built in 1915 and is called Utsikten. The purpose of this project is to on behalf of the Archipelago Foundation (Skärgårdsstiftelsen) find alternative systems that can replace the existing heating system of Utsikten (an oil-fired boiler and electricity heaters) to a system with renewable energy. The alternative system that this project focuses on is a system of solar collectors combined with a wood chip boiler.

This master thesis deals with problems in the arc length control in Pulsed MIG/MAG Welding. The main problem is that it is not possible to measure the arc length. In the present solution the voltage over both the electrode and the arc represents the arc length. To improve the arc length control a model of the electrode melting has been built. One output from the model is the voltage over the electrode and with this voltage together with the measured voltage it is possible to calculate the voltage over just the arc.

The main purpose of this Masters thesis is to examine three Swedish librarians views on their role regarding their local learning centre and its adult students. The thesis also tries to find out whether the persons responsible for the local learning centres in these municipalities regard the libraries as a resource in this context and if the municipalities express the importance of such a cooperation in documents. Previous research in information seeking and learning is presented and a survey of lifelong learning, local learning centres and libraries is made. Relevant theories, such as Loertschers taxonomy, Kuhlthaus approaches of library skills instruction and levels of mediation as well as Bruces categories of information literacy, are presented and later used in the analysis. A qualitative method was found to be most appropriate for this study, as the majority of the empirical material has been collected through interviews.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

This is a study about the transition process and the consolidation of power in Belarus. In this paper the concept of "authoritarian state building and the sources of regime competitiveness in the fourth wave" is the major theory used. After giving a description of the theory?s concepts a short historical background of Belarus follows. Chapters four describes and explain the political situation in Belarus during five periods.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

VAV (Variable Air Volume) system has been studied in a newly constructed office-building. The goal for the study has been to evaluate how the ventilations system work in practice, if adjustments can be made to achieve an more energy efficient system and to evaluate if other alternative ventilation systems is to be preferred in the further.The degree project has been executed at Helenius Engineering Firm who is working with the environment, media systems, HVAC and energy in buildings. The building that has been studied is owned and operated by Akademiska hus.Literature studies, visits at site, inventory, review of system documentation, energy analyses, interviews, key figures, LCC, sand energy- and indoor climate simulations has been made to study the building. Where appropriate some tools from Six Sigma have also been used.How to achieve an energy efficient system and a pleasant indoor climate is studied with human health and well-being as base for the indoor climate requirements. Technical support systems such as ventilation systems have to be designed so that an acceptable indoor climate can be achieved.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

An information system is something that evolves over time to enhance the company that is using it. The technology for building an information system is also evolving. New methods and new programming languages make system development easier. As new technology breaks ground and the demands of a company?s information system grow, the company will sooner or later get to a point where a change in the base of the system is necessary.

SammanfattningExamensarbetets syfte är att ge en övergripande bild om vad BIM egentligen är och hur arbetsmetoden ska kunna påverka byggprocessen positivt. Rapporten fokuserar på anläggningsbranschen och då främst från en projektörs perspektiv. Ett projekteringsexempel visar även på hur en anläggningsmodell kan skapas med hjälp av en programvara som stödjer arbetsflöden i BIM.BIM kan utläsas Building Information Model och avser då den eller de modeller som utgör en digital objektbaserad representation av en byggnad eller en anläggning. BIM kan även utläsas Building Information Modeling och avser då ett arbetssätt, d.v.s. processen att skapa och använda en eller flera byggnadsinformationsmodeller i bygg- eller anläggningsprocessen.Det finns många fördelar med att använda BIM, inte bara i husbyggnad utan även i anläggningsbranschen.

Detta projekt har producerats i samarbete med Abu Garcia i Svängsta, Blekinge. Vårat projekt är en interaktiv produkt presentation gjord i flash med inslag av 3d, video och ljud. Våran tanke är att användaren ska kunna se hur en Ambassadeur Record fiskerulle ser ut både på insidan och utsidan, hur den fungerar och vad som gör den så unik. Det finns också video filmer som beskriver tillverknings processen, och hur man som förstagångs användare använder en Ambassadeur rulle. Design och bakgrundsljud är anpassad så att den ska väcka en känsla av fiske och fridfull utomhus miljö..

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Bygghantverk, 22,5 hp, 2014.

A new shipyard on the island of Beckholmen consisting of a new ship hall and complementary workshops. The program is extended with rentable industrial space for other smaller companies to take advantage of synergies with the yard and to create an active maritime cluster around Beckholmen. By building a marina and a port at the northern shoreline of the island the shipyard can expand their potential customers to non-commercial and larger recreational boats that are becoming increasingly common in Skärgården. The port is also supplemented with a combined naval fuel station, harbor office and a small café. The boat traffic in the region gets a additional stop at the end of the port and act as an additional gateway to Djurgården. Several small retail spaces with direct access to the water is created along the promenade between the port and Djurgården. The shipyard gets a modern and efficient industry building, while the island is made available to the public again, and Beckholmen will hopefully take an equal place in the city's consciousness as it does visually in the inlet to Stockholm..

Title: Eurythmics, and building boats -A study in tacit knowledge.The education of eurhythmics at Malmö Academy of Music, is a program where a major part of the tutoring is oral; very little written information about the method is used. This essay will examine the forms in which the current knowledge base exists, as well as the methods in which this information is transmitted from teacher to student, and in which form the knowledge about the method of eurhythmics is existing. The tools for analysis are the theories on tacit knowledge. Interviews and written surveys are used as qualitative research methods. The content of these interviews and surveys are presented in the results chapter.