Byggbranschen är inne i en övergångsfas mellan 2D och 3D. BIM, som arbetsmetod, och 3D-modeller blir allt vanligare. I broprojekt är dock efterfrågan på dessa modeller låg. På WSP i Stockholm används 3D-modelleringprogrammet Tekla Structures i stor utsträckning på flera avdelningar. Önskemål finns om att utöka användningen av programmet även inom broprojektering.

The purpose of this essay is to identify the costs of illness in different organizations, and compare the calculated result with the actual result in their annual reports.We collected information thru interviews with the personnel manager in the selected organizations, and used the annual reports to add necessary information.When we applied our model, we found that the selected organizations, in some cases, have a cost of illnes which is up to seven times higher than shown in their annual reports. It?s, in general, the costs that aren?t related to the salary (additional costs), which are much higher than shown.The absence of a model that calculates the costs of illnes can result in wrongful decisions. If a model would be applied in an organization, it should increase the awearness of the actual costs of illnes, which can lead to better decisions througout the whole organization.This report is written in Swedish..

Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

The purpose of this Master thesis is to examine and describe dog breeders? information activities. Questions posed in this study are:? What are the information needs of dog breeders?? How does the dog breeder seek and use information?? How can the relationship between serious leisure and information activities be described?The theoretical framework consists of the sociologist Robert A Stebbins? theory about serious leisure. The study is based on a qualitative methodology.

The author has, with the help of AK Consultancy Indoor Air AB, formed a series of questions regarding moisture problems in buildings and how these are handled in extreme climates with high temperatures and a high relative humidity. Furthermore to analyse and indentify key material that makes a construction safe against moisture problems. Ventilation, AC and the choice of materials have in a later stage of the thesis been investigated to enhance the knowledge of moisture protection. The research for this report includes measurements on existing buildings, calculation models on the building envelope for analyses and the ingoing materials of the envelope. The health aspect of moisture problems related to ?sick building syndrome? has been included and interviews have been conducted to gather relevant information.A study of the American system, ASHRAE, American Society of Heating, Refrigeration and Air Conditioning Engineers and the standards used in Singapore has been made to highlight the difference.

This thesis will address a problem concerning availability of information systems at an enterprise within the financial sector and its external suppliers, so called trusted third party. The information system resides on the internal network of the enterprise and must be available to both employees of the enterprise and the trusted third party simultaneously. This contradicts the company policy which disallows third parties access to the internal network. The HAVECA-model introduced in this thesis provides a framework of methods, each solving a sub problem identified in the model. The identified methods are hardening, verification, control and assurance, together supplying a method for continuously securing the internal network against a trusted third party.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..

For the actors in the Swedish forest industry, it is important to have the ability to forecast the state in the privateforests. The information that comes out of the forecasts will be the base for the activities strategic direction.The aim in this exam is to survey what information that is present today as basis for forecast calculation, andeven to examine what other possibilities it might have in the future.From a limited geography and out of different time perspective forecast the felling potential in the privateforestry.With the word felling potential means regeneration felling and thinning. The exam will answer the questions:What information is needed to build a relevant forecast model?Is this information available today?Is there information to buy that would improve the forecast model?The result of this exam will be presented in form of a ”case study” showing the opportunities in the market tocreate a forecast calculation of felling potential in the private forestry within the Forest Owners’ AssociationMellanskogs wood-area Dalarna..

Det har alltid varit ett mål att uppnå god kommunikation mellan olika parter i ett byggprojekt. Ett sätt att underlätta detta kan vara att använda byggnadsinformationsmodeller (BIM). Syftet med vårt examensarbete är att ta reda på frontlinjen gällande BIM i ritprogram i allmänhet och i programmet SketchUp i synnerhet. Vi ska också undersöka IFC, ett öppet filformat som används för att visa byggnadsinformationsmodeller.Vad är då BIM, SketchUp och IFC?Kort beskrivet är BIM, Building information model, en modell som kan innehålla och hantera all information i ett byggprojekt.

Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.

This final year project is made for Peab Jönköping and its target group is the construction industry. The main focus is the use of unutilized building material in the most economical and environmental-friendly way. Unutilized building material is here defined as material purchased for a construction project that for different reasons not has been used. The most important thing to find out was how much building material considered as being waste is actually useable material, and how much less it costs to use that building material instead of throwing it away.When this information was gathered a proposal on how to efficiently use the unutilized building material instead of wasting it was designed. Costs and incomes were investigated and the proposal suggested a storage area where Peab can store their unused building material.

The purpose of this work is to providing a general set of base classes for building simulators, for example a robot system. Instead of every time building a new simulator from the beginning, you get the already completed components from a library. The library should in that way act as a springboard for development.To do this work, there?s a lot of knowledge required in how a general robot system could look like. Therefore it was necessary to gather some information about robotics.

A large part of research about libraries and library buildings in Sweden has been focused on how the building looks not how it functions with the library. The aim with this master?s thesis is to study how a library building is functioning and how its users are experiencing it. This is studied in three libraries, Kungliga tekniska högskolans bibliotek, Sambiblioteket in Härnösand and Vitterhetsakademiens bibliotek. With the questions of how they were planed, what did the libraries want from the new building and which of these demands were realized.

This paper explores the accessibility for patrons with different physical disabilities in regards to materials, service, the library building and its website at two typical, medium-sized public libraries in Sweden.The case study is based on interviews, observations, and document and literature studies. As a theoretical framework for this study, Buckland?s model of information barriers is used to describe, discuss and evaluate how the two libraries work with accessibility. In addition, international and national guidelines are used to measure whether additional actions are required of the libraries to improve the accessibility.The results show that both libraries are well suited in various respects to provide for the different needs and the requirements of patrons with physical disabilities. Some obstacles still exist in both libraries, especially in the lack of literature in accessible formats in different languages.