As energy prices skyrocket and the environmental issues become more frequently debated, interest in energy-efficient buildings has increased sharply in the past decade. Because of this, the interest to achieve high air tightness in building envelopes have once again awakened, due to a good air tightness contributes to lower energy consumption in several ways and to a healthier indoor environment.As the regulations for energy consumption and controls of achieved air tightness has tightened considerably in recent years, the work regarding sheets for air tightness changed significantly for construction contractors. This thesis includes a study that aims to detect what kind of manuals, recommendations or instructions contractors working according, and how a number of randomly selected construction companies in Halland, Sweden, are dealing with the matter of high air tightness of the building envelopes. The study also includes a knowledge inventory of supervisors, site managers and skilled workers, and what their opinions and attitudes are like towards work regarding the sheets of air tightness. The results have been compared with a similar survey dated to 2004, conducted by the SP Technical Research Institute of Sweden in collaboration with Chalmers University of Technology.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

This study has been carried out in the spring of 2014 on behalf of PQR Consult AB in Stockholm. The aim of the study has been to analyse the energy usage of the building Skarpövägen 1 in order to explore the possibilites of saving energy by using appropriate equipment. These possible solutions have been simulated by using the programe IDA Indoor Climate and Energy, combined with a life cycle cost analysis. The laundry building, Skarövägen 23, has also been analysed due to its high amount of energy usage. The result of the energy analysis showed that the energy usage was much higher than the energy declaration.

The purpose of the thesis is to investigate and analyze how three different actors linked to the urban transformation in the city of Kiruna, in this case LKAB, the Municipality of Kiruna and the County Administrative Board of Norrbotten, believe that the identity of a historical monument that is marked cultural heritage is affected by future relocation. The second part of the study is to investigate the impact the building might have on the city in the future. This study is based on the relocation of Hjalmar Lundbohmsgården.The study is based on a qualitative approach in which five informants from the three actors were interviewed. The interviews have been analyzed through thematic analysis, where a combination of theoretical thematic analysis and empirical thematic analysis was used. The result shows that the new location of Hjalmar Lundbohmsgården is preferred to be in a suitable context close to other cultural buildings. All informants agree that accessibility is a fundamental element in, which a synergistic effect is an increase in visitor numbers.

The aim of this diploma work was to obtain a review of the appeal process in Sweden under the Planning and Building Act and the possibilities of appeal in the planning and building permit process. The work was intended to identify potential problems surrounding the appeal process and possible efficiency measures. The goal was to form a report that provides a satisfactory overview of the appeal process in theory and practical application as well as provide relevant concrete proposals on how the appeal process can be streamlined.Background and facts surrounding the work were taken from different types of literature and through several interviews with representatives in government, industry and politicians.The main problems related to the appeal process are in the long processing times and the high number of appeals. There is a great interest to streamline the appeals process and the government is going to launch studies in which possible future actions will be investigated.It is possible to appeal for up to two instances before you need a so called ?leave to appeal? in order for your complaint to be passed on to the next instance.

This thesis aims to illustrate how environmental impact can be reduced, through the use of lean concrete. It also illustrates how environmental data can be applied to a house through implementation with BIM. In this study a unique concrete structure developed by Swedish Cement and Concrete Research Institute is assessed for environmental impact, by calculating the carbon dioxide equivalents using LCA methodology. The construction is a sandwich element where the concrete is made ??up of three layers.

Adherence to medical ordination is low and for long-time medication it is estimated to be as low as 50 percent. Depending on the prescribed drug this could lead to adverse effects and/or loss of effect of the drug. Information about why a drug is prescribed is important patient information and is thought to help increase compliance with the physician?s prescription. According to results from a recent study of visits to the emergency room at Karolinska Universitetssjukhuset in Solna, Stockholm, medically related problems were the cause in about 30 percent of the cases.

Denna rapport behandlar det animationsarbete som jag gått igenom för att försöka skapa så trovärdiga och dynamiska animationer som möjligt till spelet Colosseum: Code of Hammurabi och dess nya omarbetade stridssystem. Jag har utgått från ett relativt sparsmakat designdokument som i princip bara förklarar kortfattat hur spelmekaniken ska fungera på en grundläggande nivå samt en animationslista på animationer som ska finnas i spelet. Spelet ska i slutändan innehålla 3 olika vapenstilar men på grund av tidsbrist har jag valt att fokusera på en av dess, nämligen kampstilen för strid med tvåhandssvärd. Först har jag analyserat det gamla stridssystemet för att ha en grund att stå på, för att bland annat se vilka brister mitt tidigare arbete präglats av. Utifrån diverse referenser som behandlar medeltida stridkonst inom nyss nämnda kampstil har jag hämtat det mesta av inspirationen och följaktligen kryddat dessa jordnära anvisningar med mina egna idéer samt ett antal fightingspel med spektakulära kontexter och även försökt dra nytta av det material som finns i kampsportsfilmer.

Många befintliga järnvägsbroar i Sverige närmar sig sin beräknade livslängd. Det finns också en önskan att öka tåglasterna, antalet tågöverfarter och tåghastigheterna för att klara dagens och framtidens behov. För att inte behöva riva fullt fungerade broar bör bärighetsutredningar ge resultat som stämmer väl överens med verkligheten. Med dagens betongnormer kan utmattning bli den dimensionerande faktorn, trots att få fall av brott har observerats i broar av armerad betong på grund av utmattning. Detta examensarbete jämför tre utmattningsmodeller på två plattrambroar av armerad betong belastade med järnvägstrafik, en från 1972 och en från 1995.

In a recently published official Report from the Swedish Government (SOU 2010:73) a leg- islative proposal has been introduced. Its main purpose is to prevent parallel registrations of ships that are bareboat chartered to other countries. The legislative proposal claims that by preventing parallel registration of ships the Swedish Maritime Code will better corre- spond with the UN convention on the law of the sea.The UN convention on the law of the sea clearly states that ships are forbidden to fly two flags. There is however no restriction concerning parallel registration, simultaneously, in two registers. A ship that is bareboat chartered out from Sweden does not fulfil criteria re- quired in order to be deregistered, according to the Swedish maritime code.

Stockholm is constantly growing and changing. Despite this, for various reasons, it is difficult to execute large building projects. With starting-point in decision making theories we have tried to investigate these difficulties. More specifically we have chosen to study why it has not been possible to rebuilt Slussen in Stockholm. To help us structure our study we have based our research on another large comparable building project, the Globen City project.

The climate at the labour-market in Sweden today means that students who have recently passed their examinations find it quite difficult to find work. The competetiveness calls for a strategy to find advantages in the employment process. The strategy explored in this thesis is called personal branding. We believe that by building a strong personal brand you can increase the possibilities to influence the decisions of those responsible for recruitments in our society. The question we ask ourselves in this essay is how to build a personal brand with the power to give students a competetive advantage in the employment process.

This thesis aims to identify the building integrated photovoltaic solutions available in the market with respect to general pros and cons of different systems and a technical description of there attachment system. Investigate and provide examples of various building integrated photovoltaic solutions in Sweden and describe the experiences and results of these projects.The methods used to obtain relevant information are interviews with individuals involved in significant projects and a thorough search of different solutions from solar suppliers.The conclusion is that solar energy is needed for a sustainable society. There are endless opportunities regarding BIPV, with many companies with different products and individual solutions. But so far it?s not so customary in Sweden.

The purpose of this study is to examine how well the teaching of physical education meets the needs of a future life in the building and construction industry. In order to answer the survey's purpose, we have carried interviews with teachers for the subject Physical education and health as well as with teachers for the Building- and construction program in order to through their experience gain understanding of common health problems in the profession, but also to gain a deeper understanding of the importance of the subject Physical education and health for this profession. We have reported and described previous research and then analyzed it during our processing of collected data material. The result of the interviews showed that the teachers as far as possible are trying to adjust the lessons to suit this practical program. They also indicate several aspects to consider in order to further customize the education for students in the Building- and construction program.

The purpose of this work is to providing a general set of base classes for building simulators, for example a robot system. Instead of every time building a new simulator from the beginning, you get the already completed components from a library. The library should in that way act as a springboard for development.To do this work, there?s a lot of knowledge required in how a general robot system could look like. Therefore it was necessary to gather some information about robotics.