Construction waste from the housing industry includes all unnecessary consumption of building materials. The definition of construction waste is construction materials that has not been built in and becomes waste. Constructions waste can be divided into two types of contributions: operational and work site contribution. Some of the common construction materials in housing industry have such low usage level as 75 % and the rest becomes construction waste. Low usage of construction materials creates unnecessary costs and has a major environmental impact.

Guazuigua is a small village in Bolivia, which has had too small water resources, especially for irrigation. A project started after some studies were made, to create a canal to provide the village with water from a nearby town. To make the canal work it had to cross a dried out river. There have been several attempts to cross these dried out rivers, but with poor results. The purpose of the report is to provide a solution for this problem.

This paper describes the design and implementation of an automated build system for the JAS39A simulator FUS39A at HiQ:s offices in Arboga. The assignment was to automate the process in which modules are built; the simulator is composed of a number of modules which are built manually at the end of each week, this process takes about a day of manual labor. The system can automatically build a module as either a scheduled service or by manual invocation. The system contains functionality for reporting the build results to any given recipient by e-mail. The purpose of the system is to free up the time put into manually building the modules for better suited tasks by automating the build of FUS39A.The assignment was split into two parts, an analysis part where information of the old system was gathered, tools and methods were chosen and the new system was designed.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

This paper investigates the grammatical construction intransitive motionconstruction with GOAL as it is used in Swedish (Swe. intransitivrörelsekonstruktion med MÅL).I examine in which ways the construction is productive, i.e. thepossibility to use the construction with new verbs as well as withordinary motion verbs with new functions. The notion of productivity isbased on the construction?s type frequency and semantic openness(Goldberg 1995, 2006; Barðdal 2008; Bybee 2010).

AbstractTitleOwnership apartments - The success that got lostDate of seminar2011-05-27Course/ProgramBachelor thesis/Construction and Real Estate Business ProgrammeAuthorsAnna ÅbergMarie Louise Homayon NejadMentorSven-Ola CarlssonExaminerGunnar WramsbyBackgroundThe 1st of May 2009 the government introduced a new accommodation form called ownership apartments. The government´s intensions were to give the individuals more influence in their housing, to increase the variety of accommodation and thereby create a freedom of choice when selecting their housing. They also saw opportunities to reduce segregation and increase the total production of houses and or apartments with this new type of ownership. The introduction was supposed to give the building companies a possibility to build with a new type of ownership and thereby create new and an increased number of projects for the future. This new accommodation form has however not gained the penetrating power that was expected.

When I got the opportunity to write this examination did I want to write about something that I both was interest in and also can use in the future. I think it?s going to be difficult to carry on the milk production with only 28 cows. I wanted to investigate the possibility to increase the herd of cows. I also wanted to compare this cost with a new cow house the cows where milked with a robot.

Shear Strength and Deformation Characteristics of Uppsala Clay with CRS and Standard OedometerTyra Morell Bonin & Magdalena MählerTo see how much a clay compact under different pressure one can use several different methods and in this project, two methods were used, the Standard Oedometer and a CRS apparatus. A Standard Oedometer is a full-time manual device and the CRS apparatus is a modern electric and automatic device. The aim of the project was to see similarities and differences between the two methods and examine which method that were most reliable. This has been done with repeated laboratory tests and afterward evaluations. With this information one can get a picture of how the clay will behave and how it will deform in nature.

With the growth of information stored over Internet, especially in the biological field, and with discoveries being made daily in this domain, scientists are faced with an overwhelming amount of articles. Reading all published articles is a tedious and time-consuming process. Therefore a way to summarise the information in the articles is needed. A solution is the derivation of an ontology representing the knowledge enclosed in the set of articles and allowing to browse through them. In this thesis we present the tool Ontolo, which allows to build an initial ontology of a domain by inserting a set of articles related to that domain in the system.

Recently there have been a lot of talk a about the financial crisis and recession. This is understandable since the crisis, which initially was limited to the U.S. now has spread its concern globally in form of bankruptcies, less investment and lots of people have lost here jobs. The purpose of this thesis is to examine how the financial crisis have affected the construction industry relating to market and personnel, but also examine what measures the construction companies have taken. The examination was carried out by information received from the majority of construction-related websites which then was followed up with interviews in the various construction sectors.

In this essay, we have compared a conventional house to a passive house. The housesshared the same local conditions; they have the same living area and the same layout. Thedifferences between the houses were the different construction solutions for the roof, theouter walls, the floor and the heating system. Both the houses qualify the standards fromBBR and the passive house also lives up to FEBY?s special conditions.The purpose with the essay was to examine if it really is profitable to build small hoses aspassive houses.

Abstract Background: In 1997 the Kyoto Protocol was signed, it?s an international agreement which is aimed to reduce greenhouse gas emissions. Sweden's goal is to reduce energy using in buildings with 20 percent by 2020 and 50 percent by 2050. This is a comparison with levels from 1995 (Glad, 2006). For Sweden to be able to reach its goals, they need to construct more low-energy buildings (Åhman, Wahlström & Lundblad, 2010).

Everywhere you look in today?s society many kinds of people are constantly interacting with each other. Especially in large groups of people working together, the phenomenon is even greater. In the construction industry there are many kinds of parts that need to come together in order to get sustainable and successful results. Therefore the relationship between the contractor and the construction client must be at its best.

To challenge the competition within the construction business there are requirements ineffectiveness and use of operating computer based programs and work-methods. Thecomputer based programs are continuously improved and can at some point be the start of anew work-method. The work-method of tomorrow can be Building Information Modeling(BIM).This Master of Science Thesis gives an understanding in what BIM is and what therequirements for Sweco Theorells are in a future BIM-use as a consulting-firm. Theunderstanding is presented through a study of theory within the subject. The way of thinkingand acting among different disciplines and individuals within the building process isexplained through an interview study.The term BIM is regularly used.

This degree project has been performed along with Classic Garden in Gothenburg andBallongfirman Far & Flyg in Stockholm. Together we have developed a sun- wind- andrain protection. The protection is permanently assembled and mainly intended for publicenvironments as restaurants and outdoor cafés.The design on the sun protection was already done so our task has been to develop theconstruction and to build a prototype in scale 1:4 and one in scale 1:1. The look of thesun protection is approximately as the name implies, equal an igloo. The lamellae aregoing to fold out in different steps all the way down to the ground and the both sides willbe independently of each other.The first stage in the project was to develop differently principle proposal on how thefunction will work when folding in and out the protection.