Cultural objects may become wet by deliberate water cleaning, water disaster or watersoaked for other reasons. Air drying textile objects and even other organic materials from awater wet state, involves many problems depending on the strong capillarity action of water.Damages and changes such as bleeding of dyes, stains or lines of impurities from watermovement, shrinking or stiffness can occur. Freeze-drying as an alternative drying methodhas often been used for wet archaeological and marine objects, but more seldom for historicalmaterials.This bachelor thesis addresses the issue of whether freeze-drying can be an alternative controlleddrying method for historic costumes. Costumes and related objects are often compositeobjects, consisting of multiple materials, as well as being three dimensional, all of whichwill complicate drying. The purpose of this study was to investigate whether it is possible tohandle costume objects after wet cleaning for drying by freeze-drying, and if damages due tosurface tension of water, can be avoided in this way.

The master thesis ?Mechanical Integration of an IR-detector in a Micro Cooler? has beenperformed at FLIR Systems AB in Danderyd. FLIR Systems is a world leader in the design,manufacture and marketing of thermal imaging camera systems.The thesis project is divided into to two areas, Production Method and Noise.The Production Method concerns the positioning of a detector on the cold finger within the IRcamera.The detector has to be positiond with very high accuracy at the center of the cold finger,so it can be placed in line with the optical axis to avoid movement of the picture during zooming.The positioning of the detector is at present done with the help of specially designed guides on aplate on top of the cold finger. The design workes well but the special machining needed for thisplate is very expensive.The goal concerning the production method was to derive a new more cost effective method forthe assembling and positioning of the detector on the cold finger by replacing the guides on theplate with a reusable equipment or some other alignement operation.Several concept ideas have been generated with the help of concept generation methods in theform of concept classification trees and concept combinational tables. Two of these conceptswere selected to be further refined.

The tick-borne disease bovine anaplasmosis is primarily caused by Anaplasma marginale. A variety of wild animals act as reservoirs for A. marginale, but the understanding of their role in the epidemiology of A. marginale is yet poor. This cross-sectional study was conducted to establish if proximity of wildlife affect the prevalence of bovine anaplasmosis in cattle.

During the last years, the importance of sourcing in firms has increased. Globalization, fierce competition and an increased level of outsourcing are common explanations to why firms have highlighted the potential to realize savings and the value creation that the Purchasing department can generate. One trend that follows in parallel with globalization is an increased pressure from society on firms to take responsibility for the impact that its products and services have on the environment. This responsibility creates even more attention as outsourcing involves trade with suppliers in low wage countries, where the level of environmental and social responsibility is not always satisfying. The Purchasing department, the firm?s interface with suppliers should therefore, together with the firm?s Environmental department, play a key role in the firm?s contribution towards sustainable development.

Tractors of today come equipped with a CAN-system. A CAN-system sends information from sensors to electronic control units who process the signals. The sensors measure several interesting parameters such as force, pressure and speed for various components of the tractor. This thesis discuss a force sensor which is placed in the pivot of the tractors three point linkage, the sensor measure the horizontal reaction force from the load that the tractor is exposed to. Signals from this sensor can be used to measure the force from any implement that the tractor is exposed to during an operation.

As emission legislations across the world continuously pushes engine development forward,engineers constantly need to come up with and implement fuel saving technologies. During thelast decade, variable cam phasing has become a popular solution to increase gas exchangeefficiency. This configuration is typically mechanically constrained by camshaft limitations, anda solution to circumvent this problem would be to use a different valve actuation principle.One example of this is to use pressurized air controlled by electrical solenoids. Such a systemhas been developed byCargine Engineering and this provides the starting point for this work. Tobe able to operate the valvetrain on an actual engine, a control system is needed.

AimThe purpose of this study was to examine the relationship between physical strain and recovery in dancers at The Ballet Academy in Stockholm, Sweden. Research questions used to guide the study were: How great is the dancers experience of physical strain? Do any of the dancers show mental or physical signs of overtraining syndrome?MethodPhysical strain was studied by letting the dancers fill out a booklet catloging their intensity during practice. Utilizing a questionnaire, data was gathered regarding preceding year. To give more nuance to the data gathered, The Profile of Mood States was used to detect possible mood disturbance.

The prevailing urban migration is a worldwide process. This results in growing cities and a diminishing proportion of people living in the countryside. As the urbanization continues a large amount of the world?s population is expected to live in urban settlements of informal character by 2050. Green Belt has for many years been used to control urban growth and to secure the sustention of larger green areas around towns and cities.

The starting point of this study is national as well as international surveys which show that the study motivation and general level of knowledge among Swedish students have decreased. The Swedish Curriculum for the Non-Compulsory School System (Lpf94) states that each student shall be given the possibility to strengthen their will and ability to learn. The teachers are expected to play an important role in the effort to increase student motivation. The opinions of the students are a valuable source when trying to understand what motivates them. The purpose of this study is to provide a more profound understanding of what students express about their motivation in the interaction with the teachers.

På LKAB:s produktionsanläggning i Malmberget vill LKAB öka produktionskapaciteten med ca 20 % i anrikningsverket. Ett av flera alternativ för att uppnå en sådan kapacitetsökning är att installera en HPGR (High Pressure Grinding Roll) i en av Malmbergets sektioner. Tidigare studier av HPGR har visat på en möjlig kapacitetsökning samt en energibesparing. En försöksserie har genomförts för att undersöka hur väl Malmbergets malm (med interna specifika benämningen PAR) krossas i en HPGR samt om malmens malbarhet ökar. Testerna är genomförda på Hacettepe universitet i Ankara, Turkiet, med deras tryckutrustning anpassad för HPGR undersökningar.

The local politicians in Sweden are responsible for a great deal of the welfare system why one would assume that there are a lot of demands put on them - demands for certain skills or a certain level of competence. I have in this study tried to find out how the demands on the local representatives concerning the demands for competence and the actual level of competence among the politicians are affecting the local politics. This was done through investigating how the local politicians are perceiving their level of competence and the demands put on them, but also how the employees are perceiving the demands and the level of competence put on the politicians. The study was made in the municipality of Gislaved in Southern Sweden. I was using both quantitative method (an opinion poll among the politicians and employees in the municipality) and qualitative method (interviews with three politicians and three employees and literature studies).In order to investigate the demands for competence I split the concept into ?soft? competence (socially and emotionally based skills), and ?hard? competence (skills based on knowledge, education and experience).

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Den första serietillverkade hjulskotaren i Sverige presenterades 1962. Skotaren blev revolutionerande för mekaniseringen av terrängtransporterna. Hästarna ersattes och var i början av 1970-talet nästan borta från skogsbruket. Mekaniseringen innebar stor produktivitetsökning med ökade avverkningsvolymer. Hjulburna skotare har sedan introduktionen tills idag varit dominerande i det svenska skogsbruket. Under 2012 fanns ett fjortontal tillverkare av hjulskotare, vilka succesivt fått bredare hjul, mer avancerade motorer och transmissioner. Syftet med denna studie var att sammanställa tekniska data och försäljningssiffror i Sverige för hjulskotare tillverkade i de Nordiska länderna från deras introduktion 1962 fram till och med 2012 samt att besvara den frågeställning som ställts upp i studien genom att statistiskt styrka trender genom att testa hypoteserna H0: ?1 = 0 och H1: ?1 ? 0. Litteraturstudien har utförts med datainsamling av tekniska specifikationer samt årtal då serietillverkning av skotarna påbörjats.

Bakgrund: Trycksår har varit känt sedan ca 2000 f.Kr. ändå kvarstår problemet. Det är idag ett utbrett problemområde inom vården då patienter ständigt drabbas av nya trycksår trots att välbeskrivna preventionsåtgärder och riktlinjer finns att tillgå. Främst drabbade är äldre, personer som har någon form av rörelsehinder, är sängliggande eller stillasittande stora delar av dygnet. Trycksår innebär ett stort lidande för den drabbade patienten, främst i form av konstant smärta.

Denna enk?tstudie unders?ker vad f?rskolepersonal har f?r kunskap och erfarenhet av diagnosen selektiv mutism (SM) och tal?ngslan, samt om personalen anser att ytterligare utbildning beh?vs. Studien tar utg?ngspunkt i en brist p? forskning som fokuseras p? selektiv mutism i f?rskolan. Selektiv mutism ?r en ?ngestrelaterad diagnos som vanligtvis debuterar i f?rskole?ldern.